【多选题】
数控设备运行的方式有___
A. Auto
B. JOG
C. MDA
D. HND
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
ABCD
解析
暂无解析
相关试题
【单选题】
关于产品质量监督抽查的说法,正确的是___
A. 监督抽查的样品,应从企业生产线上随机抽取
B. 监督抽查必须以产品标准作为判定依据
C. 监督抽查所需费用由被抽查企业支付
D. 国家监督抽查的产品,地方不得重复抽查
【单选题】
质量管理体系其组成要素都具有___
A. 指挥、控制组织的管理职能
B. 明确的目标
C. 相互关联和相互作用的体系特征
D. 相互独立、相互支持的特征
【单选题】
为了保证产品质量检验结果的准确,产品生产者必须重视对检验结果影响因素的___
A. 质量策划
B. 质量控制
C. 质量保证
D. 质量承诺
【单选题】
由于质量特性客观存在于被检样品之中,排除其他因素影响后,样品就客观决定了___
A. 检验方法
B. 检验人员
C. 检测设备
D. 检测结果
【单选题】
一物流情况下,出现不合格品,追溯数量为___
A. 5
B. 10
C. 15
D. n*5(n为相同设备数量)
【单选题】
使用精度为0.01百分表时,长针走一圈和一小格尺寸变动多少?短针走一小格尺寸变动多少?___
A. 长针走一圈是1mm,一小格尺寸变动0.02mm;短针一小格尺寸变动1mm;
B. 长针走一圈是0.2mm,一小格尺寸变动0.001mm;短针一小格尺寸变动0.2mm;
C. 长针走一圈是0.2mm,一小格尺寸变动0.005mm;短针一小格尺寸变动0.2mm;
D. 长针走一圈是1mm,一小格尺寸变动0.01mm;短针一小格尺寸变动1mm。
【单选题】
SDS公司第三方质量管理体系认证标准,针对覆盖汽车行业的标准是指___
A. ISO9001质量管理体系标准
B. ISO/TS16949汽车行业质量管理体系标准
C. OHSAS18000职业健康安全管理体系标准
D. ISO14001环境管理体系标准
【单选题】
临时脱离通知,在 需识别为变化点___
A. 从临时脱离开始,一直到临时脱离结束期间
B. 在临时脱离开始首次执行时
C. 从临时脱离开始和结束时都需执行
D. 仅在临时脱离退出时执行
【单选题】
质量检验是指对检验的______是否符合规定要求所进行的评价___
A. 依据
B. 人员
C. 产品
D. 方法
【单选题】
判定工业产品质量特性是否合格的依据不包括___
A. 产品图纸
B. 工艺文件
C. 产品成本
D. 检验规程
【单选题】
当产品变更或顾客改变时,组织应采取的活动是___
A. 质量策划
B. 质量管理
C. 质量控制
D. 质量保证
【单选题】
顾客满意的监视是对______的一种测量手段___
A. 产品质量
B. 服务质量
C. 过程质量
D. 质量管理体系业绩
【单选题】
过程输入要求的五大要素是___
A. 人机工法环
B. 人机料法测
C. 人机料法环
D. 人机检法测
【单选题】
产品不合格分级的概念应理解为___
A. 根据其严重程度和其对产品适用性影响进行分级
B. 将可能发生的产品质量不合格,根据其严重程度的不同进行分级
C. 将已发生的产品质量不合格,按其质量特性的重要性进行分级
D. 将可能发生的产品质量不合格,根据其对产品适用性影响的不同进行分级
【单选题】
返工是指___
A. 为使不合格产品满足预期用途而对其所采取的措施
B. 对使用或放行不符合规定要求的产品的许可
C. 为使不合格产品符合要求而对其采取的措施
D. 为使不合格产品符合不同于原有的要求而对其等级的改变
【单选题】
“D”标识,在安全存档责任件中是指___
A. 作为影响安全特性过程工艺参数的标记
B. 作为安全特性的标记
C. 作为与安全特性有关的工艺流程卡上的过程标记
D. 作为与安全件和安全特性有关的存档责任文件和资料的标记
【单选题】
激光焊接中,调整以下哪种参数,不能改变焊接的深度___
A. 预热温度
B. 激光功率
C. 焊接速度
D. 离焦量
【单选题】
关于激光焊的焊缝质量描述中,以下哪种说法明显错误___
A. 焊缝表面允许有孔洞
B. 焊缝内部允许有孔洞
C. 焊缝内部允许有微裂纹缺陷
D. 焊缝表面不允许有微裂纹缺陷
【单选题】
金相显微镜通过物镜和目镜两次放大成像后,最终确定图片的倍率,那么图片的放大倍率应该为___
A. 物镜+目镜
B. 物镜*目镜
C. 物镜-目镜
D. 物镜/目镜
【单选题】
中频淬火试样在抛光完成后,需要使用一定浓度的硝酸酒精溶液腐蚀待组织显现后送至检测室检测,所用硝酸酒精溶液的浓度为___
A. 0.01
B. 0.04
C. 0.1
D. 0.5
【单选题】
淬火液冷却能力好坏直接关系到中频淬火的质量,检测淬火液是否满足要求的方法包括___
A. 目测
B. 糖量仪
C. IVF淬火液测试仪
D. 糖量仪+IVF淬火液测试仪
【单选题】
某平面对基准平面的平行度误差为0.05mm,那么这平面的平面度误差一定不大于________ mm___
A. 0.025
B. 0.04
C. 0.05
D. 0.1
【单选题】
数字式光学计应根据被测工件正确选择测帽,原则是接触面最小,因此测量圆柱形选择刀口形测帽,测量平面时需使用____测帽___
A. 球形
B. 平形
C. 尖形
D. 刀形
【单选题】
以下哪种说法是正确的___
A. 工厂所有量具都必须经过法定计量单位校准或检定后,才能投入使用
B. 工厂所有量具都必须经过校准或检定后,才能投入使用
C. 工厂所有量具都无需校准或检定
D. 工厂所有量具在任何情况下,都必须校准或检定
【单选题】
关于粗糙度测量,哪种描述是正确的___
A. 应选择被测面上目测最粗糙的区域进行测量
B. 应选择被测面上目测最光洁的区域进行测量
C. 应选择被测面上目测光洁程度较为适中的区域进行测量
D. 应选择被测面上目测最粗糙,最光洁的区域分别测量,然后计算平均值
【单选题】
关于量具的测量力,哪种做法最正确___
A. 使用尽可能大的测力,同时确保测量部件与被测件之间无间隙
B. 使用尽可能小的测力,同时确保测量部件与被测件之间无间隙
C. 使用既不太大也不太小的测力,同时确保测量部件与被测件之间无间隙
D. 测力由测量人员根据测量条件,自由选择
【单选题】
三销轴叉连接环槽跳动超差会引起___
A. 车辆异响
B. 轴叉装入变速箱困难或无法装入
C. 连接环断裂
D. 漏油
【单选题】
三销轴叉连接环槽两侧倒角过大超上差会引起___
A. 传动轴轴叉装入变速箱困难或从变速箱拆卸困难
B. 传动轴轴叉花键处异响
C. 对总成装车无影响
D. 漏油
【单选题】
DO节外星轮球面和球笼过大的配级错误将引起___
A. 车辆抖动
B. 无法行驶
C. 行驶异响
D. 装配困难
【单选题】
外星轮螺纹搓板调整不当,上下板调整过小时螺纹中心孔将___
A. 无影响
B. 开裂
C. 凸起
D. 深度浅
【单选题】
轴叉球道热处理时产生打火,导致球道表面出现材质熔化凸点,该轴叉在车辆上使用时有可能会引起___
A. 车辆行驶停止
B. 车辆抖动
C. 万向节护套破裂
D. 万向节漏油
【单选题】
固定节没有压到位,会引起___
A. 总成装车后固定节会漏油
B. 总成装车后固定节会异响
C. 总成装车后固定节会脱落
D. 拉力超差
【单选题】
固定节外星轮漏内螺纹,会导致___
A. 对总成装车无影响
B. 总成无法装车
C. 总成可以装车
D. 漏油
【单选题】
总成条形码贴错或漏贴___
A. 不影响装车不会有客户抱怨
B. 装车条形码信息不对或无法扫描,客户会抱怨
C. 客户不会知道,同样可以装车
D. 节省费用
【单选题】
轴叉油封档外圆粗糙度超差会导致___
A. 不会发生油封漏油情况
B. 零公里会发生油封漏油
C. 售后会发生油封漏油
D. 装车困难
【单选题】
ISO标准中提到的过程其组成环节不包括___
A. 输入
B. 输出
C. 转化
D. 实施活动
【单选题】
质量管理体系审核按照对象可以分为产品审核、_______和体系审核三类___
A. 设计审核
B. 过程评审
C. 功能审核
D. 过程审核
【单选题】
用于控制不合格率、废品率、交货延迟率、缺勤率等的控制图是___
A. c控制图
B. U控制图
C. p控制图
D. np控制图
【单选题】
SDS推行的4M变化点中的变化内容分为___
A. 人、机、料、法
B. 人、机、料、法、测
C. 人、机、料、法、量
D. 人、机、料、法、环
【单选题】
分析质量问题产生的原因时,通常用___
A. 排列图
B. 控制图
C. 因果图
D. K线图
推荐试题
【单选题】
对于经常有胃酸反应的人,你会建议他吃的药应具有 ___
A. 碱性的
B. 酸性的
C. 中性的
D. 辣性的
【单选题】
我国水资源的空间分布特点是___
A. 南丰北缺
B. 东北地区缺水最严重
C. 冬春季节少,夏秋季节多
D. 绝大部分地区水资源丰富
【单选题】
大气的运动变化是由什么引起的。___
A. 冷热不均
B. 水汽交换
C. 地壳运动
D. 万有引力
【单选题】
对细胞的概念,近年来比较普遍的提法是:有机体的___
A. 形态结构的基本单位
B. 形态与生理的基本单位
C. 结构与功能的基本单位
D. 生命活动的基本单位
【单选题】
自然界的生物可以分为三大类,这就是___
A. 动物、植物与微生物
B. 海洋生物、陆地生物与高山生物
C. 动物、植物与昆虫
D. 高等生物、低等生物与微生物
【单选题】
香樟是一种在长江三角洲地区常见的树种,它是属于 ___
A. 常绿针叶树种
B. 落叶针叶树种
C. 常绿阔叶树种
D. 落叶阔叶树种
【单选题】
老虎与豹是属于同一科大动物。下列动物中也属该科的是___
A. 马
B. 狼
C. 狗
D. 猫
【单选题】
生物是人类不可缺少的“朋友”,但目前正遇到___
A. 人工培育威胁
B. 种类减少威胁
C. 自相残杀威胁
D. 天外来客威胁
【单选题】
被发现在南非的古沉积岩中,地球上最早出现的绿色植物是___
A. 蕨类植物
B. 地衣
C. 蓝藻
D. 苔藓
【单选题】
植物、藻类利用叶绿素产生的光合作用过程中,在可见光的照射下,能将二氧化碳和水转化为有机物,释放出的是 ___
A. 氧气
B. 氮气
C. 氢气
D. 氯气
【单选题】
呼吸作用是生物体内的有机物在细胞内经过一系列的氧化分解,在释放出能量的同时,最终生成的主要是 ___
A. 氧气
B. 二氧化碳
C. 氮气
D. 不知道
【单选题】
晚上,植物与动物都不应该放入卧室内,要将其移到卧室外,这是因为它们会降低卧室内的___
A. 空气温度
B. 空气湿度
C. 氧气浓度
D. 氮气浓度
【单选题】
杂交优势往往在第几代杂交种子中表现最明显。___
A. 1
B. 2
C. 3
D. 4
【单选题】
以下不属于人体增强技术类型的是___
A. 短暂性增强
B. 持续性增强
C. 结构性增强
D. 内在增强
【单选题】
大陆漂移学说是由谁提出的___
A. 勒比雄
B. 魏格纳
C. 赫斯
D. 李四光
【单选题】
(1)Whieh of the following descriptions about the characteristics of physiology is wrong?___
A. It is the study of how living organisms work.
B. It illustrates the discipline of the development and the evolution of disease and the essence of disease.
C. It is to study the living phenomena and the function activities of living organs.
D. It is to explain how they are regulated and integrated.
【单选题】
(2) Which of the following are specialized in producing force and movement?___
A. muscle cells
B. connective tissues
C. nerve cells
D. epithelial cells
【单选题】
(3)The fluid environment surrounding each cell is called the___
A. intracellular fluid
B. intracellular fluid
C. internal environment
D. external environment
【单选题】
(4) Which of the following is not the fundamental characteristic of living organisms?___
A. metabolism
B. adaption
C. reproduction
D. passive diffusion
【单选题】
(5)Whicl of the following is a physiological process with negative feedback?___
A. blood coagulation
B. process of passing urine
C. sino-aortic baroreceptor reflex
D. process of parturition
【单选题】
(6)Which of the following is not the characteristic of regulation by hormone?___
A. diffusenin nature
B. longer in duration
C. accurate in action
D. action in overcorrection
【单选题】
7)Which of the following is not the characteristic of cells?___
A. They are bound by the plasma membrane
B. They have the ability to break down large molecules to smaller ones to Liberate energy for their activities
C. They possess a nucleus which contains genetic information in the form of deoxyribonucleicacid(DNA).
D. Living cells can not transform materials.
【单选题】
8)The breakdown of large molecules to smaller ones is called___
A. respiration
B. anabolism
C. catabolism
D. absorption
【单选题】
9) Which of the following descriptions about the characteristics of nervous regulation is wrong?___
A. It responds fast
B. It acts exactly
C. It responds slowly.D.
D. uration is short
【单选题】
10)Which of the following descriptions about the control of body function is wrong?___
A. Homeostasis is kept by feedback control.
B. Negative feedback minimizes the changes, leading to stability.
C. Positive feedback is not useful.
D. Feed-forward makes human body foresee and adapt itself to the environment promptly.
【单选题】
(1)Which of the following parts of knowledge of drugs should be included in pharmacology?___
A. The effects of drugs on man
B. The correlation of biological activity with chemical structure
C. The history, source, physical and chemical properties, compounding, biochemical and physiologicaleffects, mechanisms of action, absorption, distrilbution, biotransformation and excretion.
D. The prevention, recognition, and treatment of drug poisonings
【单选题】
(2)Which of the following is what a clinician is primarily interested in according to the text?___
A. Drugs which can be reasonably limited to those aspects that provide the basis for their rational clinical use
B. Chemical agents that are not used in therapy but are commonly responsible for household and industrial poisoning as well as environmental pollution
C. Drugs which are useful in the prevention,diagnosis and treatment of human disease,or in the prevention of pregnancy.
D. rugs which are useful in the prevention, diagnosis and treatment of human disease, or in the prevention of pregnancy.
【单选题】
(3)Why was the physician not interested in pharmacognosy?___
A. He didn't have to select the proper plants for his prescription
B. He had a broad botanical knowledge
C. Fewer drugs were obtained from natural sources
D. Natural drugs had little difference with synthetic ones
【单选题】
(4)Which of the following is the best way of studying pharmacology for medical students and practitioners?___
A. to have a broad botanical knowledge
B. to select a plant and its preparation
C. to have the ability to purify natural plants
D. to have curiosity that stimulates them to learn about sources of drugs
【单选题】
(5)What are the tasks related to medicines almost complete!y delegated to the pharmacists now?___
A. the physical and chemical properties of medicines
B. the preparing, compounding, and dispensing of medicines
C. dosage forms of medicines available
D. the therapeutic and other uses of medicines
【单选题】
(6) What is a main unique aspect of pharmacodynamics?___
A. Pharmacodynamics is an experimental medical science
B. Pharmacodynamics is focused on the characteristics of drugs
C. Pharmacodynamics borrows freely from both the subject matter and the experimenta techniques of physiology, biochemistry, microbiology, genetics and pathology
D. Pharmacodynamics correlates the entire field of preclinical medicine
【单选题】
7) What time of history does pharmacodynamics date back to?___
A. the second half of the seventeenth century
B. the second half of the eighteenth century
C. the second half of the nineteenth century
D. the second half of the twentieth century
【单选题】
8)What does the research on pharmacodynamics focus on?___
A. study of clinical effect of drugs
B. study of the process of drugs in the body
C. study of the effect and the mechanism of drugs on the body
D. study of the correlation of the actions and effects of drugs with their chemical structure
【单选题】
(9)Which of the following is true when drugs are selected?___
A. It has to be based in part on legal reasons.
B. It has to be based in part on ethical reasons.
C. It has to be based in part on the pharmacological evaluation in man
D. It has to be based in part on the pharmacological evaluation in animals
【单选题】
(10)Why are chemotherapeutic agents useful in therapy?___
A. They stimulate or depress biochemical or physiological function in man in a sufficiently reproducible manner to provide relief of symptoms or, ideally, to alter favorably the course of disease
B. They can produce desired effects with only tolerable undesired effects
C. They have only minimal effects on man but can destroy or eliminate parasites
D. The selectivity of their effects is one of their most important characteristics
【单选题】
1)H. Mario Geysen initially used parallel synthesis as a quick way to identify which small_____ of any given large protein bound to an antibody.___
A. division
B. pieces
C. part
D. fragment
【单选题】
2)Chemists often start a combinatorial synthesis by attaching the first set of building blocks_____ to microscopic beads made of polystyrene.___
A. solid
B. inert
C. soft
D. active
【单选题】
3)The chemical reactions required to link compounds to the beads and later to detach them____ to the synthesis proces.___
A. induce complications
B. make easy
C. introduce complications
D. introduce easy
【单选题】
4)In a parallel synthesis, all the products are_____ separately in their own reaction vessels.___
A. combined
B. assembled
C. joined
D. assorted
【单选题】
(5)In many laboratories today, robots assist with the routine work of parallel synthesis, such as small___ amounts of reactive molecules into the appropriate wells.___
A. sending
B. transporting
C. delivering
D. giving