【判断题】
为了保证大型设备基础的承载能力,一般采用钢筋温凝土整体浇灌的结构
A. 对
B. 错
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
A
解析
暂无解析
相关试题
【判断题】
多段床身接合面刮削时,将被刮的接合面端用枕木垫高的目的是便于刮研
A. 对
B. 错
【判断题】
更换清单,由主管工艺人员提出,由备件人员核定出价格,更换件包括机械,电器,液(气)压的备配件和外购件
A. 对
B. 错
【判断题】
任何提高劳动生产率的措施,都必须以经济效益为前提
A. 对
B. 错
【判断题】
精密机床导轨在的粗糙度要求是:每25mm×25mm在16~20点
A. 对
B. 错
【判断题】
工作台要牢固平稳,平台周围要保持整洁,通行要方便,1米内禁止堆放物件
A. 对
B. 错
【判断题】
两孔轴线相交成 90°角,一个孔直径为φ20mm,另一个孔直径是φ30mm,应该先钻穿直径大的孔
A. 对
B. 错
【判断题】
碳素工具钢和合金工具钢用于制造中、低速成型刀具
A. 对
B. 错
【判断题】
经纬仪整平时,经反复调整,直到仪器转到任意位置时,水准气泡最大偏离值小于二分之一格为止
A. 对
B. 错
【判断题】
刮削大型机床导轨面时,应在将导轨面上的零件全部拆除后进行,以保证刮削质量
A. 对
B. 错
【判断题】
要安排好培训计划,做好上课的准备工作,做到有组织,有计划地进行培训,做到定时间,定地点,定内容,定进度,定要求,有练习,有考核
A. 对
B. 错
【判断题】
轨道制作主要是轨道调直和接头,调直后对轨道进行编号,两条轨道上从端部或伸缩缝处算起,轨道接头至少要对齐,以使运转平稳
A. 对
B. 错
【判断题】
为实现电动机连续正转运行需采用具有接触器自锁的控制线路和手动正转控制回路
A. 对
B. 错
【判断题】
在修理带传动机构时,发现带轮孔超差额0.08mm,造成配合过松,一般可用镀铬法来加大轴颈尺寸
A. 对
B. 错
【判断题】
用经纬仪和平行光管测量机床转台分度误差时,应用专用心轴配装在转台中心孔中将经纬仪和心轴紧固联接在一起
A. 对
B. 错
【判断题】
采用双螺母螺纹式调整滚珠丝杠轴向间隙的方法结构紧凑,调整方便,应用广泛
A. 对
B. 错
【判断题】
若自准直仪上读数鼓轮每格角值分度值为1",则其线值分度值可用0.05mm/m表示
A. 对
B. 错
【判断题】
所有的紫色酒精,在 1 米内不准点有明火,不准放在暖气片上
A. 对
B. 错
【判断题】
固定式装配适用于单件和小批量模具的装配,以及装配精度要求较高,需要调整的部位较多的装配
A. 对
B. 错
【判断题】
我国对企业发生的事故,坚持“四不放过”原则进行处理
A. 对
B. 错
【判断题】
齿轮的齿侧间隙分为12 个等级
A. 对
B. 错
【判断题】
在机械设备中,凸轮表面误差将会引起扭转振动
A. 对
B. 错
【单选题】
What happens to the status of users already logged into ESXi Shell when a vSphere administrator enables lockdown mode?___
A. Users remain logged in and can run commands, except to disable lockdown mode.
B. Users remain logged in and can run commands, including disabling lockdown mode.
C. Users are immediately logged out of ESXi Shell.
D. Users are logged out after a timeout specified by the vSphere administrator.
【单选题】
What is the effective vSphere licensing level during the 60 day evaluation period?___
A. vSphere Foundation Essentials Plus
B. vSphere Standard
C. vSphere Enterprise
D. vSphere
E. nterprise Plus
【单选题】
To comply with security requirements, an administrator with a vCenter Server Appliance needs to force logoff of the vSphere web client after 10 minutes of inactivity.What should the administrator do to meet the requirement?___
A. Edit: /var/lib/vmware/vsphere-client/webclient.properties, modify session.timeout=10
B. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=600
C. Edit: /var/lib/vmware/vsphere-client/webclient.properties modify session.timeout=600
D. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=10
【单选题】
An administrator enables High Availability (HA) on a Virtual SAN cluster.Which network is used for HA Network Heatbeat configuration?___
A. The Management network.
B. The vMotion network.
C. The Virtual SAN network.
D. The Provisioning Traffic network.
【单选题】
A user wants to monitor a business-critical virtual machine to ensure that it doesn't run out of resources. What metric could be monitored in vRealize Operations to address this concern?___
A. Time Remaining badge
B. Compliance badge
C. Reclaimable Waste badge
D. Density badge
【单选题】
An administrator has recently installed a new ESXi 6.x Host, and during the configuration notices sporadic network problems. To check whether the issue occurred sometime during the configuration, the administrator would like to reset the system.How can this be accomplished in the shortest amount of time?___
A. Run the ESXi installer again and reinstall the host.
B. Select the Reset System Configuration option from the vSphere Client when connected directly to the host.
C. From the
D. irect Console User Interface, select Reset System Configuration.
【单选题】
A vApp is running out of compute resources when overall activity is high within the resource pool. At other times, everything is fine.What should be done to resolve this issue?___
A. Increase the size of the resource pool Shares.
B. Set the vApp's CPU and Memory Reservation Type to Expandable.
C. Set the vApp's CPU and Memory Limit to Unlimited.
D. Create a new resource pool with the existing hardware configuration.
【单选题】
A virtual machine has been renamed and an administrator is unable to find files with the new virtual machine name in the datastore.What is the reason for this?___
A. The names of the files on the datastore do not change.
B. The names of the files on the datastore have been corrupted.
C. The virtual machine needs to be re-added to the inventory.
D. The Distributed Resource Scheduler moved the virtual machine to another host.
【单选题】
An administrator has configured network connectivity for a new virtual machine, as shown in the Exhibit.What will occur with the network traffic of this virtual machine when communicating externally from vSwitch1?___
A. The virtual machine will communicate on both uplinks
B. The virtual machine will only communicate on vmnic1
C. The virtual machine will only communicate on vmnic2
D. The virtual machine will fail to communicate externally
【单选题】
An administrator is unable to create the first group in a new vRealize Operations environment. What is the likely cause of the problem?___
A. There are no group types defined.
B. The group is not defined in SSO.
C. There are more than 32 group types defined.
D. The description for the group is not provided.
【单选题】
A new vApp was built and tested in the corporate headquarters datacenter running vSphere 6.x. What condition would explain why the virtual machine is failing to boot in an offsite datacenter running on vSphere 5.5?___
A. The virtual machine was built with the default hardware version.
B. The VMFS 5 datastore is not compatible with virtual machines configured with vSphere 6.x.
C. a
D. RS 5.5 cluster cannot run virtual machines configured with vSphere 6.x.
【单选题】
An administrator is evaluating whether to deploy vCenter Server on a Windows server or on a vCenter Server appliance. The administrator has the following requirements: <A web browser will be utilized to manage the vSphere environment.> <16 ESXi hosts will be deployed.> <Licenses must be shared with a vCenter Server at another site.> <An external Oracle 10g database server will be used to host the vCenter Server database.> Why will the administrator need to deploy vCenter Server on a Windows server?___
A. Linked Mode is a requirement for the solution.
B. Oracle 10g is a requirement for the solution.
C. The vSphere web client is a requirement for the solution.
D. Management of more than 5 hosts is a requirement for the solution.
【单选题】
What is a benefit of using VMware Data Protection ?___
A. Provides support for guest-level backups and restores of Microsoft SQL Servers, Exchange Servers, and Share Point Servers.
B. Provides support for advanced storage services including replication, encryption, deduplication, and compression.
C. Provides direct access to VDP configuration integrated into the vSphere Client.
D. Reduces disk space consumed by virtual machine data using deduplication.
【单选题】
An administrator enables vSphere High Availability (HA) on an existing cluster with a large number of hosts and virtual machines. The administrator notices that the setup of vSphere HA on some of the hosts is failing. What step, if taken, might resolve this issue?___
A. Increase the value of the config.vpxd.das.electionWaitTimeSec setting.
B. Set the value of vpxd.das.aamMemoryLimit to 256.
C. Set the value of the das.useDefaultIsolationAddress setting to False.
D. Increase the value of the das.iostatsinterval setting.
【单选题】
An ESXi 6.x host consists of 24 logical cores. Hyperthreading is enabled on the host. What is the maximum number of vCPUs that can be assigned to a virtual machine on this host?___
A. 24
B. 48
C. 64
D. 128
【单选题】
By default, each ESXi 6.x host is provisioned with a certificate from which root certificate authority?___
A. RedHat Certificate Authority
B. VMware Certificate Authority
C. DigiCert Certificate Authority
D. Verisign Certificate Authority
【单选题】
An administrator is adding an NFS datastore as shown in the Exhibit. What is the purpose of the Servers to be added list?___
A. It contains the IP addresses of the NFS Storage Server to provide multipathing capability.
B. It contains the IP addresses of the ESXi hosts that mount the datastore.
C. It contains the IP addresses used for
D. ynamic Discovery of targets.
【单选题】
An administrator reports that the System Event log data is only available for 24 hours when reviewing the Hardware Status tab. Which condition could be responsible for the loss of data?___
A. A Reset event log was executed.
B. The statistical collection level was set to a value of 1.
C. The boot disk of the host is corrupt.
D. Syslog has been configured at the vCenter Server level.
【单选题】
During an upgrade, the ESXi 6.x installer finds an existing version of ESXi and a VMFS3 volume. No virtual machines exist on the host or VMFS3 volume. The requirement is to upgrade to VMFS5. Which option should be chosen to meet this requirement?___
A. Upgrade ESXi and preserve the VMFS datastore
B. Install ESXi and preserve the VMFS datastore
C. Install ESXi and overwrite the VMFS datastore
D. Upgrade
E. SXi and overwrite the VMFS datastore
推荐试题
【单选题】
当管道温度超过88℃时,热空气压力调节valve()___
A. “ON/OFF”功能的S2电磁线圈通电
B. 安全功能的S1电磁线圈通电
C. “ON/OFF”功能的S2电磁线圈断电
D. 安全功能的S1电磁线圈断电
【单选题】
当压气机出口温度达到230℃时,流量控制valve()___
A. 开始电控关闭
B. 开始气控关闭
C. 完全气控关闭
D. 没有影响
【单选题】
当增压方式在人工位时,垂直速率选择器放在UP位,则()___
A. 客舱高度增加
B. 客舱高度减少
C. 客舱高度不变
D. 客舱高度不受控制
【单选题】
当座舱高度达到15000ft时,有一套压力电门能自动关闭外排valve,这套压力电门位于()___
A. 座舱增压控制器里
B. 外排valve上
C. 安全valve上
D. 电子舱
【单选题】
电子舱通风半开环工作方式可能出现在()___
A. 只有在空中
B. 只有在地面
C. 空中或地面
D. 都不正确
【单选题】
电子舱通风系统目的是()___
A. 给电子舱通风
B. 确保电子舱加热
C. 避免电子舱结构损坏
D. 以上都不正确
【单选题】
对应最大巡航高度(39000Ft),最大正常座舱高度是()___
A. 8000ft
B. 9550ft
C. 11300ft
D. 15000ft
【单选题】
对于防冰valve说法正确的是()___
A. 防冰模式时,valve通电;气动温度控制模式时,valve断电
B. 防冰模式时,valve断电;气动温度控制模式时,valve通电
C. 防冰模式时,valve断电;气动温度控制模式时,valve断电
D. 防冰模式时,valve通电;气动温度控制模式时,valve通电
【单选题】
防冰valve的主要功能是()___
A. 防止主热交换器结冰
B. 防止初级热交换器结冰
C. 防止冷凝器结冰
D. 防止涡轮结冰
【单选题】
飞机在地面时,外排valve处于()___
A. 全开位
B. 全关位
C. 取决于飞机着陆前最后位置
D. 以上都不正确
【单选题】
关于电子舱通风系统“EXTRACTFAN”(排风扇)的工作情况说法正确的是()___
A. 连续工作
B. 当排风扇电门故障时停止工作
C. 当排风扇电门故障灯亮,人工超控后停止工作
D. 以上都不正确
【单选题】
关于前、后客舱area温度传感器的说法正确的是()___
A. 感受温度信号用于控制和指示
B. 可以互换
C. 安装在厨房和厕所通风管路中
D. A+B+C
【单选题】
混合组件里的挡板门(FLAP)什么时候打开()___
A. “HOTAIR”电门打到“OFF”
B. “PACK1”电门打到“OFF”
C. “PACK2”电门打到“OFF”
D. “PACK1”和“PACK2”电门打到“OFF”
【单选题】
客舱area温度显示在()___
A. 空调页面
B. 巡航页面
C. 客舱增压页面
D. A+B
【单选题】
空调控制面板上“HOTAIR”打到“OFF”时()___
A. 驾驶舱配平空气valve关闭
B. 前客舱配平空气valve关闭
C. 后客舱配平空气valve关闭
D. A+B+C
【单选题】
空调系统的旁通valve是由什么作动的()___
A. 步进式马达
B. 力矩马达
C. 液压马达
D. 以上都不是
【单选题】
空调系统旁通valve的功能是()___
A. 减少到压气机的空气流量
B. 增加到涡轮的空气量
C. 将空气从组件进口旁通到组件出口
D. 帮助调节组件出口温度
【单选题】
空调系统循环风扇有几个,受控于几个电门()___
A. 1个,1个
B. 2个,1个
C. 2个,2个
D. 1个,2个
【单选题】
空调组件的冲压空气进气门的功能是()___
A. 双组件失效时确保客舱通气
B. 提供空气到组件压气机
C. 调节通过热交换器的冷却空气
D. 提供空气到混合组件
【单选题】
空调组件的功用是()___
A. 调节热空气压力
B. 调节三个area温度
C. 调节空调供气量
D. 调节基本温度
【单选题】
空调组件水分离器分离的水会送到()___
A. 混合组件
B. 涡轮出口
C. 冲压空气进口管路
D. 组件出口
【单选题】
连接流量控制valve的流量传感器感受的是()___
A. 直接的流量信号
B. 压差信号
C. 电信号
D. 温度信号
【单选题】
另一侧发动机起动时(此时交输valve打开),组件流量控制valve()___
A. 关闭
B. 打开
C. 关闭或打开,取决于是否用空调
D. 以上都不正确
【单选题】
流量控制valve的主要功能是()___
A. 控制空气流量
B. 自动或人工关断功能
C. 调节进入组件的空气压力
D. A+B
【单选题】
流量控制valve是由什么作动的()___
A. 步进式马达
B. 力矩马达
C. 液压马达
D. 以上都不是
【单选题】
流量控制valve在哪种情况下气动关闭()___
A. 同侧发动机起动
B. 火警电门释放
C. “PACK”电门打到“OFF”
D. 压气机过热
【单选题】
蒙皮温度传感器的数量及位置()___
A. 有1个,位于电子舱
B. 有2个,位于电子舱
C. 有1个,位于飞机蒙皮上
D. 有2个,位于飞机蒙皮上
【单选题】
哪个马达是从座舱增压控制面板上控制()___
A. 马达1
B. 马达2
C. 马达3
D. 马达1和2
【单选题】
配平空气valve功能是()___
A. 通过加入冷空气来最佳化area温度
B. 通过加入热空气来最佳化area温度
C. 调节热空气压力
D. 帮助调节组件出口温度
【单选题】
起飞或着陆时,冲压空气进气门()___
A. 打开
B. 关闭
C. 打开或关闭,取决于控制面板控制
D. 以上都不正确
【单选题】
area控制器的功能是()___
A. 控制流量控制valve
B. 控制area温度
C. 控制组件
D. 控制管道温度
【单选题】
area控制器是如何进行基本温度调节()___
A. 采用三个area的温度命令
B. 采用最高的area温度命令
C. 采用最低的area温度命令
D. 采用组件出口的温度来控制
【单选题】
热空气压力调节valve的作用是()___
A. 调节下游压力
B. 调节下游温度
C. 调节加入组件出口的热空气量
D. 以上都不正确
【单选题】
热空气压力调节valve调节下游压力高于客舱压力()___
A. 1psi
B. 4psi
C. 8psi
D. 6psi
【单选题】
热空气压力调节valve下游压力高于多少时,上ECAM会出现警告信息()___
A. 1psi
B. 4psi
C. 6.5psi
D. 8psi
【单选题】
如果驾驶舱管道过热,则()___
A. 单谐音警告
B. 空调页面自动显示
C. 热空气故障灯亮
D. A+B+C
【单选题】
如果area控制器主通道故障,则三个area温度固定被控制在()___
A. 24℃
B. 20℃
C. 15℃
D. 不确定
【单选题】
如果探测到一个管道温度过热()___
A. 流量控制valve关闭
B. 混合组件里的挡板门(FLAP)关闭
C. 热空气压力调节valve和相应的配平空气valve关闭
D. 热空气压力调节valve和所有配平空气valve关闭
【单选题】
如果增压方式选在人工,而“DITCHING”电门设定在ON位时()___
A. 外排valve,应急冲压空气进气门,电子舱通风和组件流时控制valve关闭
B. 仅有外排valve关闭
C. 仅有外排valve不会自动关闭
D. 以上都不正确
【单选题】
如果组件1+2故障,则()___
A. 上ECAM有故障信息
B. 引气页面自动显示
C. 空调面板组件故障灯亮
D. 以上都正确