【判断题】
精密机床导轨在的粗糙度要求是:每25mm×25mm在16~20点
A. 对
B. 错
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
A
解析
暂无解析
相关试题
【判断题】
工作台要牢固平稳,平台周围要保持整洁,通行要方便,1米内禁止堆放物件
A. 对
B. 错
【判断题】
两孔轴线相交成 90°角,一个孔直径为φ20mm,另一个孔直径是φ30mm,应该先钻穿直径大的孔
A. 对
B. 错
【判断题】
碳素工具钢和合金工具钢用于制造中、低速成型刀具
A. 对
B. 错
【判断题】
经纬仪整平时,经反复调整,直到仪器转到任意位置时,水准气泡最大偏离值小于二分之一格为止
A. 对
B. 错
【判断题】
刮削大型机床导轨面时,应在将导轨面上的零件全部拆除后进行,以保证刮削质量
A. 对
B. 错
【判断题】
要安排好培训计划,做好上课的准备工作,做到有组织,有计划地进行培训,做到定时间,定地点,定内容,定进度,定要求,有练习,有考核
A. 对
B. 错
【判断题】
轨道制作主要是轨道调直和接头,调直后对轨道进行编号,两条轨道上从端部或伸缩缝处算起,轨道接头至少要对齐,以使运转平稳
A. 对
B. 错
【判断题】
为实现电动机连续正转运行需采用具有接触器自锁的控制线路和手动正转控制回路
A. 对
B. 错
【判断题】
在修理带传动机构时,发现带轮孔超差额0.08mm,造成配合过松,一般可用镀铬法来加大轴颈尺寸
A. 对
B. 错
【判断题】
用经纬仪和平行光管测量机床转台分度误差时,应用专用心轴配装在转台中心孔中将经纬仪和心轴紧固联接在一起
A. 对
B. 错
【判断题】
采用双螺母螺纹式调整滚珠丝杠轴向间隙的方法结构紧凑,调整方便,应用广泛
A. 对
B. 错
【判断题】
若自准直仪上读数鼓轮每格角值分度值为1",则其线值分度值可用0.05mm/m表示
A. 对
B. 错
【判断题】
所有的紫色酒精,在 1 米内不准点有明火,不准放在暖气片上
A. 对
B. 错
【判断题】
固定式装配适用于单件和小批量模具的装配,以及装配精度要求较高,需要调整的部位较多的装配
A. 对
B. 错
【判断题】
我国对企业发生的事故,坚持“四不放过”原则进行处理
A. 对
B. 错
【判断题】
齿轮的齿侧间隙分为12 个等级
A. 对
B. 错
【判断题】
在机械设备中,凸轮表面误差将会引起扭转振动
A. 对
B. 错
【单选题】
What happens to the status of users already logged into ESXi Shell when a vSphere administrator enables lockdown mode?___
A. Users remain logged in and can run commands, except to disable lockdown mode.
B. Users remain logged in and can run commands, including disabling lockdown mode.
C. Users are immediately logged out of ESXi Shell.
D. Users are logged out after a timeout specified by the vSphere administrator.
【单选题】
What is the effective vSphere licensing level during the 60 day evaluation period?___
A. vSphere Foundation Essentials Plus
B. vSphere Standard
C. vSphere Enterprise
D. vSphere
E. nterprise Plus
【单选题】
To comply with security requirements, an administrator with a vCenter Server Appliance needs to force logoff of the vSphere web client after 10 minutes of inactivity.What should the administrator do to meet the requirement?___
A. Edit: /var/lib/vmware/vsphere-client/webclient.properties, modify session.timeout=10
B. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=600
C. Edit: /var/lib/vmware/vsphere-client/webclient.properties modify session.timeout=600
D. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=10
【单选题】
An administrator enables High Availability (HA) on a Virtual SAN cluster.Which network is used for HA Network Heatbeat configuration?___
A. The Management network.
B. The vMotion network.
C. The Virtual SAN network.
D. The Provisioning Traffic network.
【单选题】
A user wants to monitor a business-critical virtual machine to ensure that it doesn't run out of resources. What metric could be monitored in vRealize Operations to address this concern?___
A. Time Remaining badge
B. Compliance badge
C. Reclaimable Waste badge
D. Density badge
【单选题】
An administrator has recently installed a new ESXi 6.x Host, and during the configuration notices sporadic network problems. To check whether the issue occurred sometime during the configuration, the administrator would like to reset the system.How can this be accomplished in the shortest amount of time?___
A. Run the ESXi installer again and reinstall the host.
B. Select the Reset System Configuration option from the vSphere Client when connected directly to the host.
C. From the
D. irect Console User Interface, select Reset System Configuration.
【单选题】
A vApp is running out of compute resources when overall activity is high within the resource pool. At other times, everything is fine.What should be done to resolve this issue?___
A. Increase the size of the resource pool Shares.
B. Set the vApp's CPU and Memory Reservation Type to Expandable.
C. Set the vApp's CPU and Memory Limit to Unlimited.
D. Create a new resource pool with the existing hardware configuration.
【单选题】
A virtual machine has been renamed and an administrator is unable to find files with the new virtual machine name in the datastore.What is the reason for this?___
A. The names of the files on the datastore do not change.
B. The names of the files on the datastore have been corrupted.
C. The virtual machine needs to be re-added to the inventory.
D. The Distributed Resource Scheduler moved the virtual machine to another host.
【单选题】
An administrator has configured network connectivity for a new virtual machine, as shown in the Exhibit.What will occur with the network traffic of this virtual machine when communicating externally from vSwitch1?___
A. The virtual machine will communicate on both uplinks
B. The virtual machine will only communicate on vmnic1
C. The virtual machine will only communicate on vmnic2
D. The virtual machine will fail to communicate externally
【单选题】
An administrator is unable to create the first group in a new vRealize Operations environment. What is the likely cause of the problem?___
A. There are no group types defined.
B. The group is not defined in SSO.
C. There are more than 32 group types defined.
D. The description for the group is not provided.
【单选题】
A new vApp was built and tested in the corporate headquarters datacenter running vSphere 6.x. What condition would explain why the virtual machine is failing to boot in an offsite datacenter running on vSphere 5.5?___
A. The virtual machine was built with the default hardware version.
B. The VMFS 5 datastore is not compatible with virtual machines configured with vSphere 6.x.
C. a
D. RS 5.5 cluster cannot run virtual machines configured with vSphere 6.x.
【单选题】
An administrator is evaluating whether to deploy vCenter Server on a Windows server or on a vCenter Server appliance. The administrator has the following requirements: <A web browser will be utilized to manage the vSphere environment.> <16 ESXi hosts will be deployed.> <Licenses must be shared with a vCenter Server at another site.> <An external Oracle 10g database server will be used to host the vCenter Server database.> Why will the administrator need to deploy vCenter Server on a Windows server?___
A. Linked Mode is a requirement for the solution.
B. Oracle 10g is a requirement for the solution.
C. The vSphere web client is a requirement for the solution.
D. Management of more than 5 hosts is a requirement for the solution.
【单选题】
What is a benefit of using VMware Data Protection ?___
A. Provides support for guest-level backups and restores of Microsoft SQL Servers, Exchange Servers, and Share Point Servers.
B. Provides support for advanced storage services including replication, encryption, deduplication, and compression.
C. Provides direct access to VDP configuration integrated into the vSphere Client.
D. Reduces disk space consumed by virtual machine data using deduplication.
【单选题】
An administrator enables vSphere High Availability (HA) on an existing cluster with a large number of hosts and virtual machines. The administrator notices that the setup of vSphere HA on some of the hosts is failing. What step, if taken, might resolve this issue?___
A. Increase the value of the config.vpxd.das.electionWaitTimeSec setting.
B. Set the value of vpxd.das.aamMemoryLimit to 256.
C. Set the value of the das.useDefaultIsolationAddress setting to False.
D. Increase the value of the das.iostatsinterval setting.
【单选题】
An ESXi 6.x host consists of 24 logical cores. Hyperthreading is enabled on the host. What is the maximum number of vCPUs that can be assigned to a virtual machine on this host?___
A. 24
B. 48
C. 64
D. 128
【单选题】
By default, each ESXi 6.x host is provisioned with a certificate from which root certificate authority?___
A. RedHat Certificate Authority
B. VMware Certificate Authority
C. DigiCert Certificate Authority
D. Verisign Certificate Authority
【单选题】
An administrator is adding an NFS datastore as shown in the Exhibit. What is the purpose of the Servers to be added list?___
A. It contains the IP addresses of the NFS Storage Server to provide multipathing capability.
B. It contains the IP addresses of the ESXi hosts that mount the datastore.
C. It contains the IP addresses used for
D. ynamic Discovery of targets.
【单选题】
An administrator reports that the System Event log data is only available for 24 hours when reviewing the Hardware Status tab. Which condition could be responsible for the loss of data?___
A. A Reset event log was executed.
B. The statistical collection level was set to a value of 1.
C. The boot disk of the host is corrupt.
D. Syslog has been configured at the vCenter Server level.
【单选题】
During an upgrade, the ESXi 6.x installer finds an existing version of ESXi and a VMFS3 volume. No virtual machines exist on the host or VMFS3 volume. The requirement is to upgrade to VMFS5. Which option should be chosen to meet this requirement?___
A. Upgrade ESXi and preserve the VMFS datastore
B. Install ESXi and preserve the VMFS datastore
C. Install ESXi and overwrite the VMFS datastore
D. Upgrade
E. SXi and overwrite the VMFS datastore
【单选题】
A vSphere 6.x Standard Switch is configured with 4 virtual machine portgroups, as shown in the exhibit. Which portgroup would be utilized by default when creating a new virtual machine?___
A. Access Network
B. DMZ Network
C. VM Network
D. Virtual Machine Network
【单选题】
Which vSphere 6.x feature will allow an organization to utilize native snapshots?___
A. Virtual Volumes
B. Virtual SAN
C. VMFS3
D. VMFS5
【单选题】
An administrator is creating a new vSphere Distributed Switch that will be utilized with a specific vSphere Cluster. The cluster itself contains a mix of ESXi 5.x and 6.x Hosts. Which Distributed Switch version should be created to support this configuration?___
A. Distributed Switch: 6.0.0
B. Distributed Switch: 5.0.0
C. Distributed Switch: 5.1.0
D. Distributed Switch: 5.5.0
【单选题】
Which load balancing policy, previously limited to vSphere Distributed Switches, is now available on vSphere Standard Switches with vSphere 6.x?___
A. Route based on physical NIC workload
B. Route based on IP Hash
C. Route based on the originating virtual port
D. Route based on Source MAC Hash
推荐试题
【单选题】
5用万用表电阻挡检测某一个二极管时,发现其正、反电阻均近于1000KΩ,这说明该二极管是属于___。
A. 短路状态;
B. 完好状态;
C. 断路状态;
D. 极性搞错。
【单选题】
6稳压二极管是一个可逆击穿二极管,稳压时工作在___状态。
A. 正偏
B. 反偏 E、正向导通 F、截止
【单选题】
7三端集成稳压器CW7812的输出电压是___。
A. 12V
B. 5V
C. 9V
【单选题】
8三端集成稳压器CXX7805的输出电压是___
A. 5v
B. 9v
C. 12v
【单选题】
9一个平衡PN结,用导线将P区和N区连起来,而导线中___。
A. 有微弱电流
B. 无电流
C. 有瞬间微弱电流
【单选题】
10二极管两端正向电压大于___电压时,二极管才导通。
A. 击穿电压;
B. 死区;
C. 饱和。
【单选题】
11当温度升高时,二极管的反向饱和电流 ___ 。
A. 增大;
B. 减小;
C. 不变;
D. 无法判定。
【单选题】
12硅二极管的正向导通压降比锗二极管的___ 。
A. 大
B. 小
C. 相等
【单选题】
13三端集成稳压器 CW7906的输出电压是___
A. -12v
B. -9v
C. -6V
【单选题】
14稳压管的工作是利用伏安特性中的___。
A. 正向特性
B. 反向特性
C. 反向击穿特性
【单选题】
15二极管具有___
A. 正向特性
B. 反向特性
C. 单向导电特性
D. 反向击穿特性
【单选题】
16图中D1-D3为理想二极管,A,B,C灯都相同,试问___灯最亮。
A. A灯
B. B灯
C. C灯
【单选题】
18在单相桥式整流电容滤波电路中,设U2为其输入电压,输出电压的平均值约为___。
A. U0=0.45U2
B. U0=1.2U2
C. U0=0.9U2
D. U0=1.4U2
【单选题】
19在单相桥式整流电路中,设U2为其输入电压,输出电压的平均值约为___。
A. U0=0.45U2
B. U0=1.2U2
C. U0=0.9U2
D. U0=1.4U2
【单选题】
20在半波整流电容滤波电路中,设U2为其输入电压,输出电压的平均值约为___。
A. U0=0.45U2
B. U0=1.2U2
C. U0=0.9U2
D. U0=1.4U2
【单选题】
21在半波整流电路中,设U2为其输入电压,输出电压的平均值约为___。
A. U0=0.45U2
B. U0=1.2U2
C. U0=0.9U2
D. U0=1.4U2
【单选题】
22温度影响了放大电路中的___,从而使静态工作点不稳定。
A. 电阻;
B. 电容;
C. 三极管;
D. 电源。
【单选题】
23用直流电压表测得放大电路中某三极管各极电位分别是2V、6V、2.7V,则三个电极分别是___。
A. [B、C、E]
B. [C、B、E]
C. [E、C、B]
【单选题】
24共射极放大电路的交流输出波形上半周失真时为___
A. 饱和失真
B. 截止失真
C. 交越失真
【单选题】
25三极管的反向电流ICBO是由___组成的。
A. 多数载流子
B. 少数载流子
C. 多数载流子和少数载流子
【单选题】
27如果在NPN型三极管放大电路中测得发射结为正向偏置,集电结也为正向偏置,则此管的工作状态为___
A. 放大状态;
B. 截止状态;
C. 饱和状态;
D. 不能确定。
【单选题】
28在以下三种电路中输入电阻最大的电路是___。
A. 共基放大电路
B. 共集放大电路
C. 共射放大电路
【单选题】
29在以下三种电路中既能放大电流,又能放大电压的电路是___。
A. 共基放大电路
B. 共集放大电路
C. 共射放大电路
【单选题】
30在以下三种电路中输出电阻最小的电路是___;
A. 共基放大电路
B. 共集放大电路
C. 共射放大电路
【单选题】
当PNP型晶体管工作在放大区时,各极电位关系为uC ___uB。
A. >
B. <
C. =
D. ≤
【单选题】
32当PNP型晶体管工作在放大区时,各极电位关系为uB___uE 。
A. >
B. <
C. =
D. ≤
【单选题】
33测得NPN型三极管上各电极对地电位分别为,,,说明此三极管处在___。
A. 放大区
B. 饱和区
C. 截止区
D. 反向击穿区
【单选题】
34若使三极管具有电流放大能力,必须满足的外部条件是___。
A. 发射结正偏、集电结正偏
B. 发射结反偏、集电结反偏
C. 发射结正偏、集电结反偏
D. 发射结反偏、集电结正偏
【单选题】
35在由PNP晶体管组成的基本共射放大电路中,当输入信号为1KHz、5mV的正弦电压时,输出电压波形出现了顶部削平的失真。这种失真是___ 。
A. 饱和失真
B. 截止失真
C. 交越失真
D. 频率失真
【单选题】
36在由PNP晶体管组成的基本共射放大电路中,当输入信号为1KHz、5mV的正弦电压时,输出电压波形出现了底部削平的失真。这种失真是___ 。
A. 饱和失真
B. 截止失真
C. 交越失真
D. 频率失真
【单选题】
37共集电极放大电路中Re的负反馈组态是___。
A. 电压串联负反馈
B. 电流串联负反馈
C. 电压并联负反馈
【单选题】
38为了使放大器带负载能力强,一般引入___负反馈。
A. 电压
B. 电流
C. 串联
【单选题】
41为了提高三极管放大电路的输入电阻,采用___负反馈 i=i1+i2
A. 电流
B. 电压
C. 并联
D. 串联
【单选题】
42为了稳定输出电流,采用___负反馈。
A. 电流
B. 电压
C. 并联
D. 串联
【单选题】
43为了改善放大器的动态性能,应该引入___电路。
A. 直流负反馈
B. 交流负反馈
C. 电压负反馈
D. 电流负反馈
【单选题】
44为了稳定放大器的静态工作点,应该引入___电路。
A. 直流负反馈
B. 交流负反馈
C. 电压负反馈
D. 电流负反馈
【单选题】
45共模抑制比是差分放大电路的一个主要技术指标,它反映放大电路___能力。
A. 放大差模抑制共模
B. 输入电阻高
C. 输出电阻低
【单选题】
46差分放大电路是为了___而设置的。
A. 稳定Au
B. 放大信号
C. 抑制零点漂移
【单选题】
47分析运放的“虚短”是指是___。
A. U-≈U+
B. I-≈I+≈0
C. U0=Ui
D. U-≈U+≈0
【单选题】
48分析运放的“虚断”是指是___。
A. U-≈U+
B. I-≈I+≈0
C. I-≈I+
D. U-≈U+≈0