【判断题】
两孔轴线相交成 90°角,一个孔直径为φ20mm,另一个孔直径是φ30mm,应该先钻穿直径大的孔
A. 对
B. 错
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
B
解析
暂无解析
相关试题
【判断题】
碳素工具钢和合金工具钢用于制造中、低速成型刀具
A. 对
B. 错
【判断题】
经纬仪整平时,经反复调整,直到仪器转到任意位置时,水准气泡最大偏离值小于二分之一格为止
A. 对
B. 错
【判断题】
刮削大型机床导轨面时,应在将导轨面上的零件全部拆除后进行,以保证刮削质量
A. 对
B. 错
【判断题】
要安排好培训计划,做好上课的准备工作,做到有组织,有计划地进行培训,做到定时间,定地点,定内容,定进度,定要求,有练习,有考核
A. 对
B. 错
【判断题】
轨道制作主要是轨道调直和接头,调直后对轨道进行编号,两条轨道上从端部或伸缩缝处算起,轨道接头至少要对齐,以使运转平稳
A. 对
B. 错
【判断题】
为实现电动机连续正转运行需采用具有接触器自锁的控制线路和手动正转控制回路
A. 对
B. 错
【判断题】
在修理带传动机构时,发现带轮孔超差额0.08mm,造成配合过松,一般可用镀铬法来加大轴颈尺寸
A. 对
B. 错
【判断题】
用经纬仪和平行光管测量机床转台分度误差时,应用专用心轴配装在转台中心孔中将经纬仪和心轴紧固联接在一起
A. 对
B. 错
【判断题】
采用双螺母螺纹式调整滚珠丝杠轴向间隙的方法结构紧凑,调整方便,应用广泛
A. 对
B. 错
【判断题】
若自准直仪上读数鼓轮每格角值分度值为1",则其线值分度值可用0.05mm/m表示
A. 对
B. 错
【判断题】
所有的紫色酒精,在 1 米内不准点有明火,不准放在暖气片上
A. 对
B. 错
【判断题】
固定式装配适用于单件和小批量模具的装配,以及装配精度要求较高,需要调整的部位较多的装配
A. 对
B. 错
【判断题】
我国对企业发生的事故,坚持“四不放过”原则进行处理
A. 对
B. 错
【判断题】
齿轮的齿侧间隙分为12 个等级
A. 对
B. 错
【判断题】
在机械设备中,凸轮表面误差将会引起扭转振动
A. 对
B. 错
【单选题】
What happens to the status of users already logged into ESXi Shell when a vSphere administrator enables lockdown mode?___
A. Users remain logged in and can run commands, except to disable lockdown mode.
B. Users remain logged in and can run commands, including disabling lockdown mode.
C. Users are immediately logged out of ESXi Shell.
D. Users are logged out after a timeout specified by the vSphere administrator.
【单选题】
What is the effective vSphere licensing level during the 60 day evaluation period?___
A. vSphere Foundation Essentials Plus
B. vSphere Standard
C. vSphere Enterprise
D. vSphere
E. nterprise Plus
【单选题】
To comply with security requirements, an administrator with a vCenter Server Appliance needs to force logoff of the vSphere web client after 10 minutes of inactivity.What should the administrator do to meet the requirement?___
A. Edit: /var/lib/vmware/vsphere-client/webclient.properties, modify session.timeout=10
B. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=600
C. Edit: /var/lib/vmware/vsphere-client/webclient.properties modify session.timeout=600
D. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=10
【单选题】
An administrator enables High Availability (HA) on a Virtual SAN cluster.Which network is used for HA Network Heatbeat configuration?___
A. The Management network.
B. The vMotion network.
C. The Virtual SAN network.
D. The Provisioning Traffic network.
【单选题】
A user wants to monitor a business-critical virtual machine to ensure that it doesn't run out of resources. What metric could be monitored in vRealize Operations to address this concern?___
A. Time Remaining badge
B. Compliance badge
C. Reclaimable Waste badge
D. Density badge
【单选题】
An administrator has recently installed a new ESXi 6.x Host, and during the configuration notices sporadic network problems. To check whether the issue occurred sometime during the configuration, the administrator would like to reset the system.How can this be accomplished in the shortest amount of time?___
A. Run the ESXi installer again and reinstall the host.
B. Select the Reset System Configuration option from the vSphere Client when connected directly to the host.
C. From the
D. irect Console User Interface, select Reset System Configuration.
【单选题】
A vApp is running out of compute resources when overall activity is high within the resource pool. At other times, everything is fine.What should be done to resolve this issue?___
A. Increase the size of the resource pool Shares.
B. Set the vApp's CPU and Memory Reservation Type to Expandable.
C. Set the vApp's CPU and Memory Limit to Unlimited.
D. Create a new resource pool with the existing hardware configuration.
【单选题】
A virtual machine has been renamed and an administrator is unable to find files with the new virtual machine name in the datastore.What is the reason for this?___
A. The names of the files on the datastore do not change.
B. The names of the files on the datastore have been corrupted.
C. The virtual machine needs to be re-added to the inventory.
D. The Distributed Resource Scheduler moved the virtual machine to another host.
【单选题】
An administrator has configured network connectivity for a new virtual machine, as shown in the Exhibit.What will occur with the network traffic of this virtual machine when communicating externally from vSwitch1?___
A. The virtual machine will communicate on both uplinks
B. The virtual machine will only communicate on vmnic1
C. The virtual machine will only communicate on vmnic2
D. The virtual machine will fail to communicate externally
【单选题】
An administrator is unable to create the first group in a new vRealize Operations environment. What is the likely cause of the problem?___
A. There are no group types defined.
B. The group is not defined in SSO.
C. There are more than 32 group types defined.
D. The description for the group is not provided.
【单选题】
A new vApp was built and tested in the corporate headquarters datacenter running vSphere 6.x. What condition would explain why the virtual machine is failing to boot in an offsite datacenter running on vSphere 5.5?___
A. The virtual machine was built with the default hardware version.
B. The VMFS 5 datastore is not compatible with virtual machines configured with vSphere 6.x.
C. a
D. RS 5.5 cluster cannot run virtual machines configured with vSphere 6.x.
【单选题】
An administrator is evaluating whether to deploy vCenter Server on a Windows server or on a vCenter Server appliance. The administrator has the following requirements: <A web browser will be utilized to manage the vSphere environment.> <16 ESXi hosts will be deployed.> <Licenses must be shared with a vCenter Server at another site.> <An external Oracle 10g database server will be used to host the vCenter Server database.> Why will the administrator need to deploy vCenter Server on a Windows server?___
A. Linked Mode is a requirement for the solution.
B. Oracle 10g is a requirement for the solution.
C. The vSphere web client is a requirement for the solution.
D. Management of more than 5 hosts is a requirement for the solution.
【单选题】
What is a benefit of using VMware Data Protection ?___
A. Provides support for guest-level backups and restores of Microsoft SQL Servers, Exchange Servers, and Share Point Servers.
B. Provides support for advanced storage services including replication, encryption, deduplication, and compression.
C. Provides direct access to VDP configuration integrated into the vSphere Client.
D. Reduces disk space consumed by virtual machine data using deduplication.
【单选题】
An administrator enables vSphere High Availability (HA) on an existing cluster with a large number of hosts and virtual machines. The administrator notices that the setup of vSphere HA on some of the hosts is failing. What step, if taken, might resolve this issue?___
A. Increase the value of the config.vpxd.das.electionWaitTimeSec setting.
B. Set the value of vpxd.das.aamMemoryLimit to 256.
C. Set the value of the das.useDefaultIsolationAddress setting to False.
D. Increase the value of the das.iostatsinterval setting.
【单选题】
An ESXi 6.x host consists of 24 logical cores. Hyperthreading is enabled on the host. What is the maximum number of vCPUs that can be assigned to a virtual machine on this host?___
A. 24
B. 48
C. 64
D. 128
【单选题】
By default, each ESXi 6.x host is provisioned with a certificate from which root certificate authority?___
A. RedHat Certificate Authority
B. VMware Certificate Authority
C. DigiCert Certificate Authority
D. Verisign Certificate Authority
【单选题】
An administrator is adding an NFS datastore as shown in the Exhibit. What is the purpose of the Servers to be added list?___
A. It contains the IP addresses of the NFS Storage Server to provide multipathing capability.
B. It contains the IP addresses of the ESXi hosts that mount the datastore.
C. It contains the IP addresses used for
D. ynamic Discovery of targets.
【单选题】
An administrator reports that the System Event log data is only available for 24 hours when reviewing the Hardware Status tab. Which condition could be responsible for the loss of data?___
A. A Reset event log was executed.
B. The statistical collection level was set to a value of 1.
C. The boot disk of the host is corrupt.
D. Syslog has been configured at the vCenter Server level.
【单选题】
During an upgrade, the ESXi 6.x installer finds an existing version of ESXi and a VMFS3 volume. No virtual machines exist on the host or VMFS3 volume. The requirement is to upgrade to VMFS5. Which option should be chosen to meet this requirement?___
A. Upgrade ESXi and preserve the VMFS datastore
B. Install ESXi and preserve the VMFS datastore
C. Install ESXi and overwrite the VMFS datastore
D. Upgrade
E. SXi and overwrite the VMFS datastore
【单选题】
A vSphere 6.x Standard Switch is configured with 4 virtual machine portgroups, as shown in the exhibit. Which portgroup would be utilized by default when creating a new virtual machine?___
A. Access Network
B. DMZ Network
C. VM Network
D. Virtual Machine Network
【单选题】
Which vSphere 6.x feature will allow an organization to utilize native snapshots?___
A. Virtual Volumes
B. Virtual SAN
C. VMFS3
D. VMFS5
【单选题】
An administrator is creating a new vSphere Distributed Switch that will be utilized with a specific vSphere Cluster. The cluster itself contains a mix of ESXi 5.x and 6.x Hosts. Which Distributed Switch version should be created to support this configuration?___
A. Distributed Switch: 6.0.0
B. Distributed Switch: 5.0.0
C. Distributed Switch: 5.1.0
D. Distributed Switch: 5.5.0
【单选题】
Which load balancing policy, previously limited to vSphere Distributed Switches, is now available on vSphere Standard Switches with vSphere 6.x?___
A. Route based on physical NIC workload
B. Route based on IP Hash
C. Route based on the originating virtual port
D. Route based on Source MAC Hash
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
推荐试题
【单选题】
主机的IPv4地址为200.200.200.201/30,拥有下列哪个IPv4地址的主机和其通信不需要经过路由器转发?___
A. 200.200.200.1
B. 200.200.200.202
C. 200.200.200.200
D. 200.200.200.203
【单选题】
网络管理员在网络中捕获到了一个数据帧,其目的MAC地址是01-00-5E-A0-B1-C3。关于该MAC地址的说法正确的是()___。
A. 它是一个单播MAC地址
B. 它是一个广播MAC地址
C. 它是一个组播MAC地址
D. 它是一个非法MAC地址
【单选题】
以下哪项不是CSMA/CD的工作原理?___
A. 边发边听
B. 延迟固定时间后重发
C. 冲突停发
D. 随机延迟后重发
E. 先听后发
【单选题】
主机的IPv4地址为200.200.200.201/30,拥有下列哪个IPv4地址的主机和其通信不需要经过路由器转发?___
A. 200.200.200.1
B. 200.200.200.202
C. 200.200.200.200
D. 200.200.200.203
【单选题】
VRP操作系统命令划分为访问级、监控级、配置级、管理级4个级别。能运行各种业务配置命令但不能操作文件系统的哪一级?___
A. 访问级
B. 监控级
C. 配置级
D. 管理级
【单选题】
VRP界面下,使用命令delete或unreserved vrpcfg.zip 无法删除文件,必须在回收站中清空,才能彻底删除文件。___
A. 正确
B. 错误
【单选题】
9现有交换机MAC地址表如下,下列说法正确的有?___
A. MAC地址5489-9885-1838是由管理员手工配置
B. MAC地址5489-9811-0b49是由管理员手工配置
C. MAC地址5489-3891-1450是由管理员手工配置
D. 交换机重启后,所有MAC地址都需要重新学习
【单选题】
如图所示,两台交换机使用默认参数运行STP,交换机A上使用了配置命令STP root primary,交换机B上使用了配置命令STP priority 0,则下面哪个端口将会被阻塞?___
A. 交换机A的G0/0/2
B. 交换机B的G0/0/1
C. 交换机A的G0/0/1
D. HUB的E0/0/3
【单选题】
STP协议的配置BPDU报文不包含以下哪个参数?___
A. Port ID
B. Bridge ID
C. VLAN ID
D. Root ID
【单选题】
缺省情况下,STP协议Forward Delay时间是多少秒?___
A. 20
B. 15
C. 10
D. 5
【单选题】
在STP协议中,假设所有交换机所配置的优先级相同,交换机1的MAC地址为00-e0-fc-00-00-40,交换机2的 MAC地址为00-e0-fc-00-00-10,交换机3的MAC地址为00-e0-fc-00-00-20,交换机4的MAC地址为00-e0-fc-00-00-80,则根交换机应当为()。___
A. 交换机1
B. 交换机2
C. 交换机3
D. 交换机4
【单选题】
如下图所示的网络,交换机的MAC地址已标出。在SWD交换机上输入命令stp root secondary,下列哪台交换机出成为此网络的根桥。___
A. SWA
B. SWB
C. SWC
D. SWD
【单选题】
下图所示的两台交换机都开启了STP协议,哪个端口最终会处于Blocking状态?___
A. SWA的G0/0/2端口
B. SWA的G0/0/3端口
C. SWB的G0/0/2端口
D. SWB的G0/0/3端口
【单选题】
如下图所示的网络,当OSPF协议稳定后,Router A和Router B的邻居状态为?___
A. 2-way
B. Down
C. Full
D. Attempt
【单选题】
下面哪个OSPF版本适用于IPv6?___
A. OSPFv2
B. OSPFv3
C. OSPFv4
D. OSPFv1
【单选题】
以下关于静态路由说法错误的是?___
A. 通过网络管理员手动配置
B. 路由器之间需要交互路由信息
C. 不能自动适应网络拓扑的变化
D. 对系统性能要求低
【单选题】
以下哪个命令可以查看OSPF是否已经正确建立邻居关系?___
A. display ospf neighbor
B. display ospf brief
C. display ospf peer
D. display ospf interface
【单选题】
对于到达同一个目的网络的多条路径,路由器需要通过比较Cost值的大小进行选择,如果Cost取值相同, 则依据Preference值的大小进行选择。___
A. 对
B. 错
【单选题】
如下图所示,主机A和主机B不能通信。___
A. 对
B. 错
【单选题】
对于到达同一个目的网络的多条路径、路由器需要通过比较Preference值的大小进行选择,如果Preference 相同,则依据Cost值的大小进行选择。___
A. 对
B. 错
【单选题】
路由表由多个要素组成,下列说法错误的是?___
A. Proto 显示学习此路由的路由协议
B. NextHop 显示此路由的本地接口地址
C. Pre显示此路由协议的优先级
D. Destination/Mask显示目的网络/主机的地址和掩码长度
【单选题】
如果DHCP客户端申请的IP地址已经被占用时,DHCP服务器会使用哪种报文作为应答?___
A. DHCP ACK
B. DHCP RELEASE
C.
D. HCP NAK
【单选题】
DHCP REQUEST报文一定是以广播形式发送的。___
A. 对
B. 错
【单选题】
DHCP客户端想要离开网络时发送哪种DHCP报文?___
A. DHCP DISCOVER
B. DHCP RELEASE
C.
D. HCP REQUEST
【单选题】
华为设备可以使用Telnet协议进行管理,关于该管理功能,以下哪个说法师正确的?___
A. Telnet默认使用的端口号为22,不可以修改
B. Telnet必须开启VTY接口接口,且最大为15
C. Telnet不支持基于用户名和密码的认证
D. Telnet不支持部署ACL来增加安全性
【单选题】
如图所示的拓扑以及交换机互联端口上的配置,可以判断标签为VLAN10的数据帧可以在两台交换机之间正常转发。___
A. 对
B. 错
【单选题】
交换机某个端口输出信息如下,下列说法错误的是?___
A. 如果数据帧携带的VLAN TAG为200,则交换机剥离VLAN TAG发出
B. 如果该端口收到不带VLAN TAG的数据帧则,则交换机需要添加VLAN
C. 该端口的链路类型为Hybrid类型
D. 如果数据帧携带的VLAN TAG为100,则交换机剥离VLAN TAG发出
【单选题】
VLANIF接口通过数据帧的哪个信息判断进行二层转发或者三层转发?___
A. 目的MAC
B. 源IP
C. 目的端口
D. 源MAC
【单选题】
两台路由器之间转发的数据包一定不携带VLAN TAG。___
A. 对
B. 错
【单选题】
VLAN标签中的Priority字段可以标识数据帧的优先级,此优先级的范围是?___
A. 0-15
B. 0-63
C. 0-7
D. 0-3
【单选题】
基于端口划分VLAN的特点是?___
A. 根据报文携带的IP地址给数据帧添加VLAN标签
B. 根据数据帧的协议类型、封装格式来分配VLAN ID
C. 主机移动位置不需要重新配置VLAN
D. 主机移动位置需要重新配置VLAN
【单选题】
PPP帧格式中的Protocol字段为0xC223,表示该协议是?___
A. CHAP
B. PAP
C. NCP
D. LCP
【单选题】
PPPoE客户端使用哪种方式向Server发送PADI报文?___
A. 广播
B. 单播
C. 组播
D. 任播
【单选题】
运用IKE协议为IPSec自动协商建立SA,可以支持在协商发起方地址动态变化情况下进行身份认证。___
A. 对
B. 错
【单选题】
缺省情况下在SNMP协议中,代理进程使用哪个端口号向NMS发送告警消息?___
A. 163
B. 161
C. 162
D. 164
【单选题】
如果报文匹配ACL的结果是“拒绝”,该报文最终被丢___
A. 对
B. 错
【单选题】
从安全性来讲,IPSec隧道模式优于IPSec传输模式。___
A. 对
B. 错
【单选题】
OSPFv3的邻接关系建立后的状态为?___
A. Loading
B. 2-way
C. Full
D. Down
【单选题】
54如图所示的网络,所有接口开启OSPFv3协议,则RouterA和Router B不能建立邻接关系。___
A. 对
B. 错
【单选题】
DHCPv6请求报文目的地址为?___
A. FF01::1:2
B. FF02::1:2
C. FF02::1
D. FF02::2