【判断题】
刮削大型机床导轨面时,应在将导轨面上的零件全部拆除后进行,以保证刮削质量
A. 对
B. 错
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
B
解析
暂无解析
相关试题
【判断题】
要安排好培训计划,做好上课的准备工作,做到有组织,有计划地进行培训,做到定时间,定地点,定内容,定进度,定要求,有练习,有考核
A. 对
B. 错
【判断题】
轨道制作主要是轨道调直和接头,调直后对轨道进行编号,两条轨道上从端部或伸缩缝处算起,轨道接头至少要对齐,以使运转平稳
A. 对
B. 错
【判断题】
为实现电动机连续正转运行需采用具有接触器自锁的控制线路和手动正转控制回路
A. 对
B. 错
【判断题】
在修理带传动机构时,发现带轮孔超差额0.08mm,造成配合过松,一般可用镀铬法来加大轴颈尺寸
A. 对
B. 错
【判断题】
用经纬仪和平行光管测量机床转台分度误差时,应用专用心轴配装在转台中心孔中将经纬仪和心轴紧固联接在一起
A. 对
B. 错
【判断题】
采用双螺母螺纹式调整滚珠丝杠轴向间隙的方法结构紧凑,调整方便,应用广泛
A. 对
B. 错
【判断题】
若自准直仪上读数鼓轮每格角值分度值为1",则其线值分度值可用0.05mm/m表示
A. 对
B. 错
【判断题】
所有的紫色酒精,在 1 米内不准点有明火,不准放在暖气片上
A. 对
B. 错
【判断题】
固定式装配适用于单件和小批量模具的装配,以及装配精度要求较高,需要调整的部位较多的装配
A. 对
B. 错
【判断题】
我国对企业发生的事故,坚持“四不放过”原则进行处理
A. 对
B. 错
【判断题】
齿轮的齿侧间隙分为12 个等级
A. 对
B. 错
【判断题】
在机械设备中,凸轮表面误差将会引起扭转振动
A. 对
B. 错
【单选题】
What happens to the status of users already logged into ESXi Shell when a vSphere administrator enables lockdown mode?___
A. Users remain logged in and can run commands, except to disable lockdown mode.
B. Users remain logged in and can run commands, including disabling lockdown mode.
C. Users are immediately logged out of ESXi Shell.
D. Users are logged out after a timeout specified by the vSphere administrator.
【单选题】
What is the effective vSphere licensing level during the 60 day evaluation period?___
A. vSphere Foundation Essentials Plus
B. vSphere Standard
C. vSphere Enterprise
D. vSphere
E. nterprise Plus
【单选题】
To comply with security requirements, an administrator with a vCenter Server Appliance needs to force logoff of the vSphere web client after 10 minutes of inactivity.What should the administrator do to meet the requirement?___
A. Edit: /var/lib/vmware/vsphere-client/webclient.properties, modify session.timeout=10
B. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=600
C. Edit: /var/lib/vmware/vsphere-client/webclient.properties modify session.timeout=600
D. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=10
【单选题】
An administrator enables High Availability (HA) on a Virtual SAN cluster.Which network is used for HA Network Heatbeat configuration?___
A. The Management network.
B. The vMotion network.
C. The Virtual SAN network.
D. The Provisioning Traffic network.
【单选题】
A user wants to monitor a business-critical virtual machine to ensure that it doesn't run out of resources. What metric could be monitored in vRealize Operations to address this concern?___
A. Time Remaining badge
B. Compliance badge
C. Reclaimable Waste badge
D. Density badge
【单选题】
An administrator has recently installed a new ESXi 6.x Host, and during the configuration notices sporadic network problems. To check whether the issue occurred sometime during the configuration, the administrator would like to reset the system.How can this be accomplished in the shortest amount of time?___
A. Run the ESXi installer again and reinstall the host.
B. Select the Reset System Configuration option from the vSphere Client when connected directly to the host.
C. From the
D. irect Console User Interface, select Reset System Configuration.
【单选题】
A vApp is running out of compute resources when overall activity is high within the resource pool. At other times, everything is fine.What should be done to resolve this issue?___
A. Increase the size of the resource pool Shares.
B. Set the vApp's CPU and Memory Reservation Type to Expandable.
C. Set the vApp's CPU and Memory Limit to Unlimited.
D. Create a new resource pool with the existing hardware configuration.
【单选题】
A virtual machine has been renamed and an administrator is unable to find files with the new virtual machine name in the datastore.What is the reason for this?___
A. The names of the files on the datastore do not change.
B. The names of the files on the datastore have been corrupted.
C. The virtual machine needs to be re-added to the inventory.
D. The Distributed Resource Scheduler moved the virtual machine to another host.
【单选题】
An administrator has configured network connectivity for a new virtual machine, as shown in the Exhibit.What will occur with the network traffic of this virtual machine when communicating externally from vSwitch1?___
A. The virtual machine will communicate on both uplinks
B. The virtual machine will only communicate on vmnic1
C. The virtual machine will only communicate on vmnic2
D. The virtual machine will fail to communicate externally
【单选题】
An administrator is unable to create the first group in a new vRealize Operations environment. What is the likely cause of the problem?___
A. There are no group types defined.
B. The group is not defined in SSO.
C. There are more than 32 group types defined.
D. The description for the group is not provided.
【单选题】
A new vApp was built and tested in the corporate headquarters datacenter running vSphere 6.x. What condition would explain why the virtual machine is failing to boot in an offsite datacenter running on vSphere 5.5?___
A. The virtual machine was built with the default hardware version.
B. The VMFS 5 datastore is not compatible with virtual machines configured with vSphere 6.x.
C. a
D. RS 5.5 cluster cannot run virtual machines configured with vSphere 6.x.
【单选题】
An administrator is evaluating whether to deploy vCenter Server on a Windows server or on a vCenter Server appliance. The administrator has the following requirements: <A web browser will be utilized to manage the vSphere environment.> <16 ESXi hosts will be deployed.> <Licenses must be shared with a vCenter Server at another site.> <An external Oracle 10g database server will be used to host the vCenter Server database.> Why will the administrator need to deploy vCenter Server on a Windows server?___
A. Linked Mode is a requirement for the solution.
B. Oracle 10g is a requirement for the solution.
C. The vSphere web client is a requirement for the solution.
D. Management of more than 5 hosts is a requirement for the solution.
【单选题】
What is a benefit of using VMware Data Protection ?___
A. Provides support for guest-level backups and restores of Microsoft SQL Servers, Exchange Servers, and Share Point Servers.
B. Provides support for advanced storage services including replication, encryption, deduplication, and compression.
C. Provides direct access to VDP configuration integrated into the vSphere Client.
D. Reduces disk space consumed by virtual machine data using deduplication.
【单选题】
An administrator enables vSphere High Availability (HA) on an existing cluster with a large number of hosts and virtual machines. The administrator notices that the setup of vSphere HA on some of the hosts is failing. What step, if taken, might resolve this issue?___
A. Increase the value of the config.vpxd.das.electionWaitTimeSec setting.
B. Set the value of vpxd.das.aamMemoryLimit to 256.
C. Set the value of the das.useDefaultIsolationAddress setting to False.
D. Increase the value of the das.iostatsinterval setting.
【单选题】
An ESXi 6.x host consists of 24 logical cores. Hyperthreading is enabled on the host. What is the maximum number of vCPUs that can be assigned to a virtual machine on this host?___
A. 24
B. 48
C. 64
D. 128
【单选题】
By default, each ESXi 6.x host is provisioned with a certificate from which root certificate authority?___
A. RedHat Certificate Authority
B. VMware Certificate Authority
C. DigiCert Certificate Authority
D. Verisign Certificate Authority
【单选题】
An administrator is adding an NFS datastore as shown in the Exhibit. What is the purpose of the Servers to be added list?___
A. It contains the IP addresses of the NFS Storage Server to provide multipathing capability.
B. It contains the IP addresses of the ESXi hosts that mount the datastore.
C. It contains the IP addresses used for
D. ynamic Discovery of targets.
【单选题】
An administrator reports that the System Event log data is only available for 24 hours when reviewing the Hardware Status tab. Which condition could be responsible for the loss of data?___
A. A Reset event log was executed.
B. The statistical collection level was set to a value of 1.
C. The boot disk of the host is corrupt.
D. Syslog has been configured at the vCenter Server level.
【单选题】
During an upgrade, the ESXi 6.x installer finds an existing version of ESXi and a VMFS3 volume. No virtual machines exist on the host or VMFS3 volume. The requirement is to upgrade to VMFS5. Which option should be chosen to meet this requirement?___
A. Upgrade ESXi and preserve the VMFS datastore
B. Install ESXi and preserve the VMFS datastore
C. Install ESXi and overwrite the VMFS datastore
D. Upgrade
E. SXi and overwrite the VMFS datastore
【单选题】
A vSphere 6.x Standard Switch is configured with 4 virtual machine portgroups, as shown in the exhibit. Which portgroup would be utilized by default when creating a new virtual machine?___
A. Access Network
B. DMZ Network
C. VM Network
D. Virtual Machine Network
【单选题】
Which vSphere 6.x feature will allow an organization to utilize native snapshots?___
A. Virtual Volumes
B. Virtual SAN
C. VMFS3
D. VMFS5
【单选题】
An administrator is creating a new vSphere Distributed Switch that will be utilized with a specific vSphere Cluster. The cluster itself contains a mix of ESXi 5.x and 6.x Hosts. Which Distributed Switch version should be created to support this configuration?___
A. Distributed Switch: 6.0.0
B. Distributed Switch: 5.0.0
C. Distributed Switch: 5.1.0
D. Distributed Switch: 5.5.0
【单选题】
Which load balancing policy, previously limited to vSphere Distributed Switches, is now available on vSphere Standard Switches with vSphere 6.x?___
A. Route based on physical NIC workload
B. Route based on IP Hash
C. Route based on the originating virtual port
D. Route based on Source MAC Hash
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
An administrator has just completed performing an interactive installation of ESXi 6.x and is booting the host. How is the network initially configured?___
A. The network is configured by Automatic Private IP Addressing (APIPA).
B. The network is configured based on the settings detected in DNS.
C. The network is configured with the address as specified in the installer.
D. The network is automatically configured by DHCP.
【单选题】
You have just installed an ESXi 6.x Host. As part of your company security regulations, a security banner must be presented on the console of the host. How can this action be accomplished?___
A. Configure the Advanced Settings > Annotations screen of the ESXi host.
B. This is configured from the Direct Console User Interface configuration menu.
C. It is not possible to configure a security banner for the ESXi host.
D. From vCenter Server, this setting is configured globally in the vCenter Server configuration.
【单选题】
An administrator is only able to see the Health Badge when using the vRealize Operations user interface. What is the likely cause of this behavior?___
A. The vRealize Operations Foundation License is in use.
B. The vmware-sps service failed to start.
C. The vRealize Operations Standard License is in use.
D. The vmware-rbd-watchdog service failed to start.
推荐试题
【单选题】
(71385).阅读电气控制线路图,应由( )逐条分析控制电路,弄清它是如何控制动力电路的。[321120426(1.0分)___
A. 左至右
B. 右至左
C. 上至下
D. 下至上
【单选题】
(71386).绘制电气控制线路图时,控制电路应垂直于电源线,画在动力电路的( )侧。[211120218](1.0分)___
A. 左
B. 右
C. 上
D. 下
【单选题】
(71387)事故等级分为特别重大事故、重大事故、( )和一般事故。(1.0分)___
A. 大事故
B. 较大事故
C. 险性事故
D. 责任事故
【单选题】
(71388).绘制电气控制线路图时,同一电器的各个元件可以分散地画在不同的电路中,标以( )的文字符号。[211120128](1.0分)___
A. 相同
B. 不同
C. 类似
D. 相关
【单选题】
(71389)绘制电气控制线路图时,因接触器线圈属耗能元件,通常画在控制电路的( )。[211120205](1.0分)___
A. 上部
B. 下部
C. 中部
D. 任意位置
【单选题】
(71390)万用表使用完毕,应将其转换开关转到空挡或电压的( )挡。[322110219](1.0分)___
A. 最高
B. 最低
C. 中间
D. 任意
【单选题】
(71391)SWKP AS 20C型防滑器进行压力开关试验,当压力大于( )时,压力开关接通[331120804](1.0分)___
A. 100 kPa
B. 180 kPa
C. 160 kPa
D. 130 kPa
【单选题】
(71392)兆欧表是专门用来测量绝缘电阻值的仪表,标尺的单位是( )。[321110220](1.0分)___
A. 欧
B. 千欧
C. 万欧
D. 兆欧
【单选题】
(71393)兆欧表在未通电时,指针处于( )的位置。[322110220](1.0分)___
A. 0
B. ∞
C. 任意
D. 满刻度1/2
【单选题】
(71394)使用万用表时应检查表盘符号,“Π”代表( )使用。[221110719](1.0分)___
A. 平放
B. 垂直
C. 悬挂
D. 任意
【单选题】
(71395)测量额定电压为500 V以下电气设备的绝缘电阻,应选用( )兆欧表。[321110720](1.0分___)
A. 500 V或1 000 V
B. 500 V或2 500 V
C. 1000 V或2 500 V
D. 任意
【单选题】
(71396)熔断器的额定电流是指容许通过的( )。(1.0分)___
A. 额定电流值
B. 工作电流
C. 最大电流值
D. 最小电流值
【单选题】
(71397).测量额定电压为500 V以上电气设备的绝缘电阻,应选用( )兆欧表。[322110720](1.0分)___
A. 500 V或1 000 V
B. 500 V或2 500 V
C. 1 000 V或2 500 V
D. 任意
【单选题】
(71398).使用钳形电流表测量电流时,如被测电流较小,可将被测导线多绕几圈套入钳口测量,用指针所指读数( )所绕线圈数即为实际电流值332110205(1.0分)___
A. 乘以
B. 除以
C. 加上
D. 减去
【单选题】
(71399)电工用绝缘柄钢丝钳的工作电压为( )。[321110505](1.0分)___
A. 220 V
B. 380 V
C. 500 V
D. 5 000 V
【单选题】
(71400).手持电动工具电源线长度不够时,应用( )。[321120504](1.0分)___
A. 耦合器连接
B. 导线接长
C. 调换电源线
D. 增设电源插座
【单选题】
(71401).试电笔检测电压的范围为( )。[213110505](1.0分)___
A. 2.5~220 V
B. 60~500 V
C. 220~380 V
D. 220~500 V
【单选题】
(71402)列车及调车作业中发生冲突、脱轨、火灾、爆炸、相撞,造成客运列车报废1辆或大破2辆以上的,为( )。(1.0分)___
A. 一般A类事故
B. 一般B类事故
C. 一般C类事故
D. 一般D类事故
【单选题】
(71403)使用剥线钳时,选择的切口直径必须( )导线线芯直径,以免剥削时切伤线芯。[212110507](1.0分)___
A. 小于
B. 大于
C. 等于
D. 任意
【单选题】
(71404)使用电工钳剪切导线时,禁止同时剪切2根以上( )导线。[312110507](1.0分)___
A. 相同
B. 异相
C. 零线
D. 任意
【单选题】
(71405)同一系列和结构的蓄电池内阻与容量的大小( )。[331110645](1.0分)___
A. 成正比
B. 成反比
C. 成非线性关系
D. 不能比较
【单选题】
(71406)配制酸性电解液时,配液室内应备有( )水溶液,以备电解液溅到皮肤或衣服上时,用其冲洗。[332110645](1.0分)___
A. 氢氧化钠
B. 氯化钠
C. 氢氧化铵
D. 硼酸
【单选题】
(71407)配制碱性电解液时,配液室内应备有( )水溶液,以备电解液溅到皮肤上时,用其冲洗。[333110645](1.0分)___
A. 硫酸
B. 盐酸
C. 硝酸
D. 硼酸
【单选题】
(71408)基尔霍夫第一定律也叫( )电流定律。[223110207](1.0分)___
A. 回路
B. 节点
C. 支路
D. 网孔
【单选题】
(71409)电风扇在额定电压下连续工作1 h,机体表面最高温升不超过( )。(1.0分)___
A. 12 ℃
B. 24 ℃
C. 30 ℃
D. 45 ℃
【单选题】
(71410)基尔霍夫第二定律也叫( )电压定律。[213110207](1.0分)___
A. 回路
B. 节点
C. 支路
D. 网孔
【单选题】
(71411)关闭折角塞门发出列车或运行中关闭折角塞门的为( )。(1.0分)___
A. 一般A类事故
B. 一般B类事故
C. 一般C类事故
D. 一般D类事故
【单选题】
(71412)求解复杂电路,最常用的方法是( )。[213110206](1.0分)___
A. 支路电流法
B. 回路电流法
C. 戴维南定理
D. 不能确定
【单选题】
(71413)判断感生电动势的方向,通常用( )定律。[223110207](1.0分)___
A. 法拉第电磁感应
B. 楞次
C. 欧姆
D. 电磁感应
【单选题】
(71414)电感量一定的线圈,产生自感电动势大,说明该线圈中通过电流的( )。[233110207](1.0分)___
A. 数值大
B. 变比量大
C. 时间长
D. 变化率大
【单选题】
(71415)( )由铁道部组织事故调查组进行调查。(1.0分)___
A. 特别重大事故
B. 重大事故
C. 较大事故
D. 一般事故
【单选题】
(71416)BY-2型逆变器的工作电压为直流( )。(1.0分)___
A. 25~30 V
B. 30~35 V
C. 36~40 V
D. 44~65 V
【单选题】
(71417)由磁路欧姆定律可知,电磁设备要获得一定的磁通,磁路中气隙越大,所需励磁电流( )。[233110205](1.0分)___
A. 越大
B. 越小
C. 不变
D. 无法确定
【单选题】
(71418)铁道部、安全监管办的安全监察部门应在事故调查组工作结束后( )之内,根据事故报告,制作《铁路交通事故认定书》,经批准后,送达相关单位。(1.0分)___
A. 5日
B. 10日
C. 15日
D. 30日
【单选题】
(71419)用万用表的不同欧姆挡测量二极管的正反向电阻时,获得的结果差异较大,这是因为( )。[322110230](1.0分)___
A. 该二极管已损坏
B. 万用表各挡存在偏差
C. 二极管电阻是可变的
D. 二极管的伏安特性是非线性的
【单选题】
(71420)BY-2型逆变器的频率为( )。(1.0分)___
A. 33 kHz±5 kHz
B. 36 kHz±5 kHz
C. 39 kHz±5 kHz
D. 42 kHz±5 kHz
【单选题】
(71421)单相半波整流时,二极管实际承受的反向电压的最大值,出现在二极管( )。[233110210](1.0分)___
A. 截止时
B. 导通时
C. 由截止转向导通时
D. 不确定
【单选题】
(71422)晶体三极管是( )控制元件。[222110211](1.0分)___
A. 线性
B. 电压
C. 电流
D. 功率
【单选题】
(71423)晶体三极管作开关用时,工作于( )。[212110211](1.0分)___
A. 放大区
B. 饱和区
C. 饱和区或截止区
D. 截止区
【单选题】
(71424)单结晶体管最主要的特点是具有( )。[211110210](1.0分)___
A. 电阻特性
B. 电容特性
C. 变容特性
D. 负阻特性