【判断题】
若自准直仪上读数鼓轮每格角值分度值为1",则其线值分度值可用0.05mm/m表示
A. 对
B. 错
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
B
解析
暂无解析
相关试题
【判断题】
所有的紫色酒精,在 1 米内不准点有明火,不准放在暖气片上
A. 对
B. 错
【判断题】
固定式装配适用于单件和小批量模具的装配,以及装配精度要求较高,需要调整的部位较多的装配
A. 对
B. 错
【判断题】
我国对企业发生的事故,坚持“四不放过”原则进行处理
A. 对
B. 错
【判断题】
齿轮的齿侧间隙分为12 个等级
A. 对
B. 错
【判断题】
在机械设备中,凸轮表面误差将会引起扭转振动
A. 对
B. 错
【单选题】
What happens to the status of users already logged into ESXi Shell when a vSphere administrator enables lockdown mode?___
A. Users remain logged in and can run commands, except to disable lockdown mode.
B. Users remain logged in and can run commands, including disabling lockdown mode.
C. Users are immediately logged out of ESXi Shell.
D. Users are logged out after a timeout specified by the vSphere administrator.
【单选题】
What is the effective vSphere licensing level during the 60 day evaluation period?___
A. vSphere Foundation Essentials Plus
B. vSphere Standard
C. vSphere Enterprise
D. vSphere
E. nterprise Plus
【单选题】
To comply with security requirements, an administrator with a vCenter Server Appliance needs to force logoff of the vSphere web client after 10 minutes of inactivity.What should the administrator do to meet the requirement?___
A. Edit: /var/lib/vmware/vsphere-client/webclient.properties, modify session.timeout=10
B. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=600
C. Edit: /var/lib/vmware/vsphere-client/webclient.properties modify session.timeout=600
D. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=10
【单选题】
An administrator enables High Availability (HA) on a Virtual SAN cluster.Which network is used for HA Network Heatbeat configuration?___
A. The Management network.
B. The vMotion network.
C. The Virtual SAN network.
D. The Provisioning Traffic network.
【单选题】
A user wants to monitor a business-critical virtual machine to ensure that it doesn't run out of resources. What metric could be monitored in vRealize Operations to address this concern?___
A. Time Remaining badge
B. Compliance badge
C. Reclaimable Waste badge
D. Density badge
【单选题】
An administrator has recently installed a new ESXi 6.x Host, and during the configuration notices sporadic network problems. To check whether the issue occurred sometime during the configuration, the administrator would like to reset the system.How can this be accomplished in the shortest amount of time?___
A. Run the ESXi installer again and reinstall the host.
B. Select the Reset System Configuration option from the vSphere Client when connected directly to the host.
C. From the
D. irect Console User Interface, select Reset System Configuration.
【单选题】
A vApp is running out of compute resources when overall activity is high within the resource pool. At other times, everything is fine.What should be done to resolve this issue?___
A. Increase the size of the resource pool Shares.
B. Set the vApp's CPU and Memory Reservation Type to Expandable.
C. Set the vApp's CPU and Memory Limit to Unlimited.
D. Create a new resource pool with the existing hardware configuration.
【单选题】
A virtual machine has been renamed and an administrator is unable to find files with the new virtual machine name in the datastore.What is the reason for this?___
A. The names of the files on the datastore do not change.
B. The names of the files on the datastore have been corrupted.
C. The virtual machine needs to be re-added to the inventory.
D. The Distributed Resource Scheduler moved the virtual machine to another host.
【单选题】
An administrator has configured network connectivity for a new virtual machine, as shown in the Exhibit.What will occur with the network traffic of this virtual machine when communicating externally from vSwitch1?___
A. The virtual machine will communicate on both uplinks
B. The virtual machine will only communicate on vmnic1
C. The virtual machine will only communicate on vmnic2
D. The virtual machine will fail to communicate externally
【单选题】
An administrator is unable to create the first group in a new vRealize Operations environment. What is the likely cause of the problem?___
A. There are no group types defined.
B. The group is not defined in SSO.
C. There are more than 32 group types defined.
D. The description for the group is not provided.
【单选题】
A new vApp was built and tested in the corporate headquarters datacenter running vSphere 6.x. What condition would explain why the virtual machine is failing to boot in an offsite datacenter running on vSphere 5.5?___
A. The virtual machine was built with the default hardware version.
B. The VMFS 5 datastore is not compatible with virtual machines configured with vSphere 6.x.
C. a
D. RS 5.5 cluster cannot run virtual machines configured with vSphere 6.x.
【单选题】
An administrator is evaluating whether to deploy vCenter Server on a Windows server or on a vCenter Server appliance. The administrator has the following requirements: <A web browser will be utilized to manage the vSphere environment.> <16 ESXi hosts will be deployed.> <Licenses must be shared with a vCenter Server at another site.> <An external Oracle 10g database server will be used to host the vCenter Server database.> Why will the administrator need to deploy vCenter Server on a Windows server?___
A. Linked Mode is a requirement for the solution.
B. Oracle 10g is a requirement for the solution.
C. The vSphere web client is a requirement for the solution.
D. Management of more than 5 hosts is a requirement for the solution.
【单选题】
What is a benefit of using VMware Data Protection ?___
A. Provides support for guest-level backups and restores of Microsoft SQL Servers, Exchange Servers, and Share Point Servers.
B. Provides support for advanced storage services including replication, encryption, deduplication, and compression.
C. Provides direct access to VDP configuration integrated into the vSphere Client.
D. Reduces disk space consumed by virtual machine data using deduplication.
【单选题】
An administrator enables vSphere High Availability (HA) on an existing cluster with a large number of hosts and virtual machines. The administrator notices that the setup of vSphere HA on some of the hosts is failing. What step, if taken, might resolve this issue?___
A. Increase the value of the config.vpxd.das.electionWaitTimeSec setting.
B. Set the value of vpxd.das.aamMemoryLimit to 256.
C. Set the value of the das.useDefaultIsolationAddress setting to False.
D. Increase the value of the das.iostatsinterval setting.
【单选题】
An ESXi 6.x host consists of 24 logical cores. Hyperthreading is enabled on the host. What is the maximum number of vCPUs that can be assigned to a virtual machine on this host?___
A. 24
B. 48
C. 64
D. 128
【单选题】
By default, each ESXi 6.x host is provisioned with a certificate from which root certificate authority?___
A. RedHat Certificate Authority
B. VMware Certificate Authority
C. DigiCert Certificate Authority
D. Verisign Certificate Authority
【单选题】
An administrator is adding an NFS datastore as shown in the Exhibit. What is the purpose of the Servers to be added list?___
A. It contains the IP addresses of the NFS Storage Server to provide multipathing capability.
B. It contains the IP addresses of the ESXi hosts that mount the datastore.
C. It contains the IP addresses used for
D. ynamic Discovery of targets.
【单选题】
An administrator reports that the System Event log data is only available for 24 hours when reviewing the Hardware Status tab. Which condition could be responsible for the loss of data?___
A. A Reset event log was executed.
B. The statistical collection level was set to a value of 1.
C. The boot disk of the host is corrupt.
D. Syslog has been configured at the vCenter Server level.
【单选题】
During an upgrade, the ESXi 6.x installer finds an existing version of ESXi and a VMFS3 volume. No virtual machines exist on the host or VMFS3 volume. The requirement is to upgrade to VMFS5. Which option should be chosen to meet this requirement?___
A. Upgrade ESXi and preserve the VMFS datastore
B. Install ESXi and preserve the VMFS datastore
C. Install ESXi and overwrite the VMFS datastore
D. Upgrade
E. SXi and overwrite the VMFS datastore
【单选题】
A vSphere 6.x Standard Switch is configured with 4 virtual machine portgroups, as shown in the exhibit. Which portgroup would be utilized by default when creating a new virtual machine?___
A. Access Network
B. DMZ Network
C. VM Network
D. Virtual Machine Network
【单选题】
Which vSphere 6.x feature will allow an organization to utilize native snapshots?___
A. Virtual Volumes
B. Virtual SAN
C. VMFS3
D. VMFS5
【单选题】
An administrator is creating a new vSphere Distributed Switch that will be utilized with a specific vSphere Cluster. The cluster itself contains a mix of ESXi 5.x and 6.x Hosts. Which Distributed Switch version should be created to support this configuration?___
A. Distributed Switch: 6.0.0
B. Distributed Switch: 5.0.0
C. Distributed Switch: 5.1.0
D. Distributed Switch: 5.5.0
【单选题】
Which load balancing policy, previously limited to vSphere Distributed Switches, is now available on vSphere Standard Switches with vSphere 6.x?___
A. Route based on physical NIC workload
B. Route based on IP Hash
C. Route based on the originating virtual port
D. Route based on Source MAC Hash
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
An administrator has just completed performing an interactive installation of ESXi 6.x and is booting the host. How is the network initially configured?___
A. The network is configured by Automatic Private IP Addressing (APIPA).
B. The network is configured based on the settings detected in DNS.
C. The network is configured with the address as specified in the installer.
D. The network is automatically configured by DHCP.
【单选题】
You have just installed an ESXi 6.x Host. As part of your company security regulations, a security banner must be presented on the console of the host. How can this action be accomplished?___
A. Configure the Advanced Settings > Annotations screen of the ESXi host.
B. This is configured from the Direct Console User Interface configuration menu.
C. It is not possible to configure a security banner for the ESXi host.
D. From vCenter Server, this setting is configured globally in the vCenter Server configuration.
【单选题】
An administrator is only able to see the Health Badge when using the vRealize Operations user interface. What is the likely cause of this behavior?___
A. The vRealize Operations Foundation License is in use.
B. The vmware-sps service failed to start.
C. The vRealize Operations Standard License is in use.
D. The vmware-rbd-watchdog service failed to start.
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets either of these conditions: <High virtual CPU> <High active memory consumption.> <The alarm is only triggering when both of the conditions are met.> What can be done to correct the alarm behavior?___
A. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory and link them together with ESXCLI.
D. Delete the existing alarm and create a new event based alarm.
【单选题】
An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease? ___
A. Restart Management Network
B. Restore Network Settings
C. Test Management Network
D. Configure Management Network
【单选题】
An administrator is attempting to restore a number of files in a directory within the Operating System of a virtual machine. How can the administrator restore the files from a previous backup? ___
A. Use the File Level Restore option from the selected backup of the virtual machine in the vSphere Web Client.
B. Connect to the File Level Restore tool from a web browser in the virtual machine.
C. Connect to the File Level Restore tool from the VMware
D. ata Protection appliance.
【单选题】
After selecting an object in vRealize Operations, how can a user compare the badge values of related child objects? ___
A. Use the Scoreboard tab
B. Use the Relationship tab
C. Use the Members tab
D. Use the Overview tab
【单选题】
You want to deploy a vApp and dynamically assign IP addresses without a DHCP server on the network. Which action would you take to accomplish this task? ___
A. Enable IP pools.
B. Configure a local DHCP server in the vApp.
C. Enable NAT on the vApp router.
D. Configure the guest OS for workgroup and WINS.
【单选题】
What is the optimal configuration when building a virtual machine for a single-threaded Windows application? ___
A. Deploy single-threaded applications on uniprocessor virtual machines.
B. Deploy single-threaded applications on symmetric multi-processor virtual machines.
C. Tune single-threaded applications to take advantage of symmetric multi-processor resources.
D. Tune Single-threaded applications at the hypervisor level.
【单选题】
An administrator has created the resource pool configuration shown in the Exhibit. Based on the exhibit, which virtual machine(s) can be successfully powered on? ___
A. VM-M1 only
B. VM-K1 only
C. VM-K1 and VM-K2 only
D. VM-K1, VM-K2, and VM-M1
推荐试题
【单选题】
线路损失率即为线路损失电量占【】的百分比。___
A. 供电量
B. 售电量
C. 用电量
D. 设备容量
【单选题】
《国家电网公司供电服务规范》规定:用电业务办理时间一般每件不超过【】分钟。___
A. 10
B. 15
C. 20
D. 30
【单选题】
对10kV避雷器用【】绝缘电阻表测量,绝缘电阻不低于1000MΩ,合格后方可安装。___
A. 500V
B. 1000V
C. 2500V
D. 5000V
【单选题】
垂直接地体的布置,其每根接地极的垂直间距应大于或等于【】。___
A. 8m
B. 7m
C. 6m
D. 5m
【单选题】
对于45°拉线长度可按地面杆高的【】倍来计算,并加上回头缠绕长度。___
A. KONG
B. 1.828
C. 1.414
D. 1.114
【单选题】
对有备用电源的用户,不管是否启用,【】,以免遗漏。___
A. 可以不抄表
B. 都要抄表
C. 可抄可不抄
D. 视情况而定
【单选题】
《供电营业规则》第二十一条规定:供电方案的有效期是指从供电方案正式通知书发出之日起至【】为止。___
A. 受电工程开工日
B. 受电工程完工日
C. 正式用电
D. 签订供用电合同
【单选题】
安装计量用互感器的作用是【】。___
A. 准确计量电量
B. 加强线损管理
C. 扩大电能表量程
D. 计算负荷
【单选题】
电压互感器文字符号用【】标志。___
A. PA
B. PV
C. TA
D. TV
【单选题】
低压线路每百个台区至少设置【】电压监测点。___
A. 1个
B. 2个
C. 3个
D. 4个
【单选题】
在绑扎铝导线中,铝包带应超出绑扎部分或金具外【】mm。___
A. 10
B. 30
C. 40
D. 50
【单选题】
《用电检查管理办法》中规定,用电检查的主要范围是客户的【】。___
A. 用电性质
B. 受电装置
C. 计量表计
D. 负荷特性
【单选题】
在有多个观测档进行弧垂调整的前提下,为保证弧垂的观测精度,应按【】顺序依次调整。___
A. 无要求
B. 由中间向两端
C. 由挂线端向紧线端
D. 由紧线端向挂线端
【单选题】
中性点接地的三相四线制电网中一般采用【】电缆。___
A. 单芯
B. 两芯
C. 三芯
D. 四芯
【单选题】
用电负荷按供电可靠性要求分为【】类。___
A. 3
B. 4
C. 5
D. 2
【单选题】
隔离开关的主要作用是【】。___
A. 仅进行倒闸操作
B. 切断电气设备
C. 使检修设备和带电设备隔离
D. 熄灭电弧
【单选题】
客户低压配电室应尽量【】。___
A. 远离客户负荷中心
B. 靠近客户负荷中心
C. 靠近高压供电点
D. 远离高压供电点
【单选题】
电力变压器的基本文字符号为【】。___
A. TA
B. TM
C. TR
D. TL
【单选题】
喷灯使用根据喷灯所用燃料油的种类,加注燃料油,首先旋开加油螺塞,注入燃料油,注入油量要低于油桶最大容量的【】,然后旋紧加油螺塞。___
A. KONG
B. 1/4
C. 3/4
D. 4/5
【单选题】
《供电营业规则》规定:临时用电期限除经供电企业准许外,一般不得超过【】个月。___
A. 3
B. 6
C. 9
D. 12
【单选题】
工作中如有特殊情况,工作许可人需要变更检修设备的运行接线方式时,应事先取得【】的同意。___
A. 车间主任
B. 班长
C. 值长
D. 工作负责人
【单选题】
10kV及以下电力线路,水平排列的导线弧垂相间误差应不大于【】。___
A. 50mm
B. 100mm
C. 150mm
D. 200mm
【单选题】
某房地产客户申请低压临时用电,用电容量80kW,其计费用电能表属于【】电能计量装置。___
A. I类
B. II类
C. III类
D. IV类
【单选题】
某受电容量为400千伏安工业用户,因生产任务的原因到供电部门申请暂停变压器四个月,但到执行暂停的第十天,用户接到订单,随即到供电部门申请暂停恢复,供电部门在执行暂停的第十三天完成暂停恢复的工作,则该抄表周期内【】。___
A. 可以减收12天的基本电费
B. 可以减收13天的基本电费
C. 可以减收10天的基本电费
D. 收取全月天数的基本电费
【单选题】
客户工程施工结束后,【】必须首先进行自验收,验收合格后提提交竣工申请报告,申请验收。___
A. 客户
B. 施工单位
C. 供电公司
D. 供电所
【单选题】
抄录智能表中的最大需量时,应为整数及后【】位小数。___
A. 2
B. 3
C. 4
D. 5
【单选题】
《供电营业规则》第九十八条则进一步明确规定,电费违约金从逾期之日起计算至交纳日止,对于大工业客户,每日电费违约金按下列规定计算:当年欠费部分,每日按欠费总额的【】计算。___
A. 千分之二
B. 千分之一
C. KONG
D. 千分之五
【单选题】
某工业用电客户,按规定每月的25日至30日为交费日期,因某种原因,应在2012年12月25日至30日交的20000元电费到2013年1月5日才交清,则该客户在2013年1月5日应交违约金总额为【】元。___
A. 100
B. 200
C. 250
D. 340
【单选题】
瓷质熔断器在金属底板上安装时,其底座应垫【】。___
A. 铜封垫
B. 绝缘封垫
C. 硬封垫
D. 软封垫
【单选题】
安装具有几种规格的熔断器应在底座旁标明【】。___
A. 型号
B. 规格
C. 厂家
D. 编号
【单选题】
行人通过地区,当坑挖完不能马上立杆时,应设置围栏,在夜间要装设【】信号灯。___
A. 黄色
B. 绿色
C. 红色
D. 白色
【单选题】
人工开挖杆坑,坑深在1.7m时,应采用【】开挖。___
A. 一阶坑
B. 二阶坑
C. 三阶坑
D. 直接
【单选题】
实抄率、差错率和电费回收率是电费管理的主要【】。___
A. 考核指标
B. 考核标准
C. 考核项目
D. 考核制度
【单选题】
以铜带作为屏蔽层的铝芯挤包绝缘电缆,当电缆线芯截面积在70-150mm2及以下时,接地线截面不小于【】mm2。___
A. 10
B. 16
C. 25
D. 35
【单选题】
热收缩管和热收缩分支套的收缩覆盖物,当环境温度在【】以下时,应进行预热。___
A. -10℃
B. 0℃
C. 10℃
D. 15℃
【单选题】
高压断路器主要用于【】的配电设备的控制和保护。___
A. 0.4kV
B. 0.4kV及以上
C. 10kV
D. 10kV及以上
【单选题】
在高压电能传输中,一般用【】。___
A. 钢芯铝绞线
B. 钢缆
C. 铜芯线
D. 铝芯线
【单选题】
三相有功电能表的电压接入,要求按【】。___
A. 正序接入
B. 负序接入
C. 零序接入
D. 顺时接入
【单选题】
按《国家电网公司业扩供电方案编制导则》规定,负荷电流为【】以上时,宜采用经电流互感器接入式的接线方式。___
A. 40A
B. 50A
C. 60A
D. 80A
【单选题】
一般来说.电击比电伤的伤害度【】。___
A. 轻
B. 重
C. KONG
D. 无可比性