【判断题】
所有的紫色酒精,在 1 米内不准点有明火,不准放在暖气片上
A. 对
B. 错
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
B
解析
暂无解析
相关试题
【判断题】
固定式装配适用于单件和小批量模具的装配,以及装配精度要求较高,需要调整的部位较多的装配
A. 对
B. 错
【判断题】
我国对企业发生的事故,坚持“四不放过”原则进行处理
A. 对
B. 错
【判断题】
齿轮的齿侧间隙分为12 个等级
A. 对
B. 错
【判断题】
在机械设备中,凸轮表面误差将会引起扭转振动
A. 对
B. 错
【单选题】
What happens to the status of users already logged into ESXi Shell when a vSphere administrator enables lockdown mode?___
A. Users remain logged in and can run commands, except to disable lockdown mode.
B. Users remain logged in and can run commands, including disabling lockdown mode.
C. Users are immediately logged out of ESXi Shell.
D. Users are logged out after a timeout specified by the vSphere administrator.
【单选题】
What is the effective vSphere licensing level during the 60 day evaluation period?___
A. vSphere Foundation Essentials Plus
B. vSphere Standard
C. vSphere Enterprise
D. vSphere
E. nterprise Plus
【单选题】
To comply with security requirements, an administrator with a vCenter Server Appliance needs to force logoff of the vSphere web client after 10 minutes of inactivity.What should the administrator do to meet the requirement?___
A. Edit: /var/lib/vmware/vsphere-client/webclient.properties, modify session.timeout=10
B. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=600
C. Edit: /var/lib/vmware/vsphere-client/webclient.properties modify session.timeout=600
D. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=10
【单选题】
An administrator enables High Availability (HA) on a Virtual SAN cluster.Which network is used for HA Network Heatbeat configuration?___
A. The Management network.
B. The vMotion network.
C. The Virtual SAN network.
D. The Provisioning Traffic network.
【单选题】
A user wants to monitor a business-critical virtual machine to ensure that it doesn't run out of resources. What metric could be monitored in vRealize Operations to address this concern?___
A. Time Remaining badge
B. Compliance badge
C. Reclaimable Waste badge
D. Density badge
【单选题】
An administrator has recently installed a new ESXi 6.x Host, and during the configuration notices sporadic network problems. To check whether the issue occurred sometime during the configuration, the administrator would like to reset the system.How can this be accomplished in the shortest amount of time?___
A. Run the ESXi installer again and reinstall the host.
B. Select the Reset System Configuration option from the vSphere Client when connected directly to the host.
C. From the
D. irect Console User Interface, select Reset System Configuration.
【单选题】
A vApp is running out of compute resources when overall activity is high within the resource pool. At other times, everything is fine.What should be done to resolve this issue?___
A. Increase the size of the resource pool Shares.
B. Set the vApp's CPU and Memory Reservation Type to Expandable.
C. Set the vApp's CPU and Memory Limit to Unlimited.
D. Create a new resource pool with the existing hardware configuration.
【单选题】
A virtual machine has been renamed and an administrator is unable to find files with the new virtual machine name in the datastore.What is the reason for this?___
A. The names of the files on the datastore do not change.
B. The names of the files on the datastore have been corrupted.
C. The virtual machine needs to be re-added to the inventory.
D. The Distributed Resource Scheduler moved the virtual machine to another host.
【单选题】
An administrator has configured network connectivity for a new virtual machine, as shown in the Exhibit.What will occur with the network traffic of this virtual machine when communicating externally from vSwitch1?___
A. The virtual machine will communicate on both uplinks
B. The virtual machine will only communicate on vmnic1
C. The virtual machine will only communicate on vmnic2
D. The virtual machine will fail to communicate externally
【单选题】
An administrator is unable to create the first group in a new vRealize Operations environment. What is the likely cause of the problem?___
A. There are no group types defined.
B. The group is not defined in SSO.
C. There are more than 32 group types defined.
D. The description for the group is not provided.
【单选题】
A new vApp was built and tested in the corporate headquarters datacenter running vSphere 6.x. What condition would explain why the virtual machine is failing to boot in an offsite datacenter running on vSphere 5.5?___
A. The virtual machine was built with the default hardware version.
B. The VMFS 5 datastore is not compatible with virtual machines configured with vSphere 6.x.
C. a
D. RS 5.5 cluster cannot run virtual machines configured with vSphere 6.x.
【单选题】
An administrator is evaluating whether to deploy vCenter Server on a Windows server or on a vCenter Server appliance. The administrator has the following requirements: <A web browser will be utilized to manage the vSphere environment.> <16 ESXi hosts will be deployed.> <Licenses must be shared with a vCenter Server at another site.> <An external Oracle 10g database server will be used to host the vCenter Server database.> Why will the administrator need to deploy vCenter Server on a Windows server?___
A. Linked Mode is a requirement for the solution.
B. Oracle 10g is a requirement for the solution.
C. The vSphere web client is a requirement for the solution.
D. Management of more than 5 hosts is a requirement for the solution.
【单选题】
What is a benefit of using VMware Data Protection ?___
A. Provides support for guest-level backups and restores of Microsoft SQL Servers, Exchange Servers, and Share Point Servers.
B. Provides support for advanced storage services including replication, encryption, deduplication, and compression.
C. Provides direct access to VDP configuration integrated into the vSphere Client.
D. Reduces disk space consumed by virtual machine data using deduplication.
【单选题】
An administrator enables vSphere High Availability (HA) on an existing cluster with a large number of hosts and virtual machines. The administrator notices that the setup of vSphere HA on some of the hosts is failing. What step, if taken, might resolve this issue?___
A. Increase the value of the config.vpxd.das.electionWaitTimeSec setting.
B. Set the value of vpxd.das.aamMemoryLimit to 256.
C. Set the value of the das.useDefaultIsolationAddress setting to False.
D. Increase the value of the das.iostatsinterval setting.
【单选题】
An ESXi 6.x host consists of 24 logical cores. Hyperthreading is enabled on the host. What is the maximum number of vCPUs that can be assigned to a virtual machine on this host?___
A. 24
B. 48
C. 64
D. 128
【单选题】
By default, each ESXi 6.x host is provisioned with a certificate from which root certificate authority?___
A. RedHat Certificate Authority
B. VMware Certificate Authority
C. DigiCert Certificate Authority
D. Verisign Certificate Authority
【单选题】
An administrator is adding an NFS datastore as shown in the Exhibit. What is the purpose of the Servers to be added list?___
A. It contains the IP addresses of the NFS Storage Server to provide multipathing capability.
B. It contains the IP addresses of the ESXi hosts that mount the datastore.
C. It contains the IP addresses used for
D. ynamic Discovery of targets.
【单选题】
An administrator reports that the System Event log data is only available for 24 hours when reviewing the Hardware Status tab. Which condition could be responsible for the loss of data?___
A. A Reset event log was executed.
B. The statistical collection level was set to a value of 1.
C. The boot disk of the host is corrupt.
D. Syslog has been configured at the vCenter Server level.
【单选题】
During an upgrade, the ESXi 6.x installer finds an existing version of ESXi and a VMFS3 volume. No virtual machines exist on the host or VMFS3 volume. The requirement is to upgrade to VMFS5. Which option should be chosen to meet this requirement?___
A. Upgrade ESXi and preserve the VMFS datastore
B. Install ESXi and preserve the VMFS datastore
C. Install ESXi and overwrite the VMFS datastore
D. Upgrade
E. SXi and overwrite the VMFS datastore
【单选题】
A vSphere 6.x Standard Switch is configured with 4 virtual machine portgroups, as shown in the exhibit. Which portgroup would be utilized by default when creating a new virtual machine?___
A. Access Network
B. DMZ Network
C. VM Network
D. Virtual Machine Network
【单选题】
Which vSphere 6.x feature will allow an organization to utilize native snapshots?___
A. Virtual Volumes
B. Virtual SAN
C. VMFS3
D. VMFS5
【单选题】
An administrator is creating a new vSphere Distributed Switch that will be utilized with a specific vSphere Cluster. The cluster itself contains a mix of ESXi 5.x and 6.x Hosts. Which Distributed Switch version should be created to support this configuration?___
A. Distributed Switch: 6.0.0
B. Distributed Switch: 5.0.0
C. Distributed Switch: 5.1.0
D. Distributed Switch: 5.5.0
【单选题】
Which load balancing policy, previously limited to vSphere Distributed Switches, is now available on vSphere Standard Switches with vSphere 6.x?___
A. Route based on physical NIC workload
B. Route based on IP Hash
C. Route based on the originating virtual port
D. Route based on Source MAC Hash
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
A storage administrator is not seeing full utilization of all bandwidth from an ESXi host. The vSphere administrator observes the adapter details, as shown in the Exhibit. What is the probable cause of this issue?___
A. Another path needs to be used to allow full utilization of the bandwidth.
B. The array is not setup to use the correct multipathing policy.
C. There are no virtual machines on the host.
D. No traffic is being sent across it because a path failed.
【单选题】
An administrator has just completed performing an interactive installation of ESXi 6.x and is booting the host. How is the network initially configured?___
A. The network is configured by Automatic Private IP Addressing (APIPA).
B. The network is configured based on the settings detected in DNS.
C. The network is configured with the address as specified in the installer.
D. The network is automatically configured by DHCP.
【单选题】
You have just installed an ESXi 6.x Host. As part of your company security regulations, a security banner must be presented on the console of the host. How can this action be accomplished?___
A. Configure the Advanced Settings > Annotations screen of the ESXi host.
B. This is configured from the Direct Console User Interface configuration menu.
C. It is not possible to configure a security banner for the ESXi host.
D. From vCenter Server, this setting is configured globally in the vCenter Server configuration.
【单选题】
An administrator is only able to see the Health Badge when using the vRealize Operations user interface. What is the likely cause of this behavior?___
A. The vRealize Operations Foundation License is in use.
B. The vmware-sps service failed to start.
C. The vRealize Operations Standard License is in use.
D. The vmware-rbd-watchdog service failed to start.
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets either of these conditions: <High virtual CPU> <High active memory consumption.> <The alarm is only triggering when both of the conditions are met.> What can be done to correct the alarm behavior?___
A. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory and link them together with ESXCLI.
D. Delete the existing alarm and create a new event based alarm.
【单选题】
An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease? ___
A. Restart Management Network
B. Restore Network Settings
C. Test Management Network
D. Configure Management Network
【单选题】
An administrator is attempting to restore a number of files in a directory within the Operating System of a virtual machine. How can the administrator restore the files from a previous backup? ___
A. Use the File Level Restore option from the selected backup of the virtual machine in the vSphere Web Client.
B. Connect to the File Level Restore tool from a web browser in the virtual machine.
C. Connect to the File Level Restore tool from the VMware
D. ata Protection appliance.
【单选题】
After selecting an object in vRealize Operations, how can a user compare the badge values of related child objects? ___
A. Use the Scoreboard tab
B. Use the Relationship tab
C. Use the Members tab
D. Use the Overview tab
【单选题】
You want to deploy a vApp and dynamically assign IP addresses without a DHCP server on the network. Which action would you take to accomplish this task? ___
A. Enable IP pools.
B. Configure a local DHCP server in the vApp.
C. Enable NAT on the vApp router.
D. Configure the guest OS for workgroup and WINS.
【单选题】
What is the optimal configuration when building a virtual machine for a single-threaded Windows application? ___
A. Deploy single-threaded applications on uniprocessor virtual machines.
B. Deploy single-threaded applications on symmetric multi-processor virtual machines.
C. Tune single-threaded applications to take advantage of symmetric multi-processor resources.
D. Tune Single-threaded applications at the hypervisor level.
【单选题】
An administrator has created the resource pool configuration shown in the Exhibit. Based on the exhibit, which virtual machine(s) can be successfully powered on? ___
A. VM-M1 only
B. VM-K1 only
C. VM-K1 and VM-K2 only
D. VM-K1, VM-K2, and VM-M1
【单选题】
Which vSphere 6 Enterprise Edition feature will allow an organization to ensure that critical multi-threaded applications have the maximum possible uptime? ___
A. Fault Tolerance
B. High Availability
C. Distributed Resource Scheduler
D. App HA
推荐试题
【单选题】
向酸性K2Cr2O7溶液中加入H2O2,却未观察到蓝色物质生成,其原因肯定是___
A. 未加入乙醚,因CrO5与乙醚的加合物为蓝色
B. 未加入戊醇,因CrO5萃取到戊醇中显蓝色
C. 未将溶液调至碱性,因CrO5在酸性介质中分解
D. 因K2Cr2O7和/或H2O2浓度过稀
【单选题】
实验中使用的磺酸型阳离子交换树脂的活性交换基团是___
A. –COOH
B. –OH
C. –SO3H
D. –NH2
【单选题】
使用氢氟酸时,下列哪一个操作是不正确的?___
A. 操作应在通风厨中进行
B. 用量筒量取氢氟酸,倒入烧杯中
C. 操作上应戴上橡皮手套
D. 使用时应采用塑料或铂制器皿
【单选题】
使用碱式滴定管滴定的操作正确的是:___
A. 左手捏于稍高于玻璃球的近旁
B. 右手捏于稍高于玻璃球的近旁
C. 左手捏于稍低于玻璃球的近
D. 右手捏于稍低于玻璃球的近旁
【单选题】
若要使吸光度降低为原来的一半,CZ的做法是___
A. 将待测液稀释一倍
B. 选用新的测定波长
C. 选用原厚度1/2的比色皿
D. 更换显色剂
【单选题】
用基准物质Na2C2O4标定KMnO4时,下列哪种操作时错误的?___
A. 锥形瓶用Na2C2O4溶液润洗
B. 滴定管用KMnO4标液润洗
C. KMnO4标液盛放在棕色瓶中
D. KMnO4标准溶液放置一周后标定
【单选题】
实验室中常用的干燥剂变色硅胶失效后呈何种颜色?___
A. 蓝色
B. 黄色
C. 红色
D. 绿色
【单选题】
可用哪种方法减少分析测试中的偶然误差?___
A. 对照试验
B. 空白试验
C. 增加平行测试次数
D. 仪器矫正
【单选题】
用基准硼砂标定HCl时,操作步骤要求加水50mL,但实际上多加了20mL,这将对HCl浓度的标定产生什么影响?___
A. 偏高
B. 偏低
C. 无影响
D. 无法确定
【单选题】
(1+1)HCl溶液的物质的量浓度为多少?___
A. 2mol/L
B. 4mol/L
C. 6mol/L
D. 8mol/L
【单选题】
常量滴定管可估计到±0.01mL,若要求滴定的相对误差小于0.1%,在滴定时,耗用体积一般控制在:___
A. 10~20mL
B. 20~30mL
C. 30~40mL
D. 40~50mL
【单选题】
定量分析中,基准物质是___
A. 纯物质
B. 标准参考物质
C. 组成恒定的物质
D. 组成一定、纯度高、性质稳定且摩尔质量较大的物质
【单选题】
测定复方氢氧化铝药片中Al3+、Mg2+混合液时,EDTA滴定Al3+含量时,为了消除Mg2+干扰,最简便的方法是:___
A. 沉淀分离法
B. 控制酸度法
C. 配位掩蔽法
D. 溶剂萃取法
【单选题】
滴定操作中,对实验结果无影响的是:___
A. 滴定管用纯净水洗净后装入标准液滴定
B. 滴定中活塞漏水
C. 滴定中往锥形瓶中加少量蒸馏水
D. 滴定管下端气泡未赶尽
【单选题】
下列器皿不能直接用酒精灯加热的是:___
A. 试剂瓶
B. 蒸发皿
C. 烧杯
D. 烧瓶
【单选题】
下列仪器在量取或配制标准溶液前不需要润洗的是:___
A. 吸量管
B. 移液管
C. 滴定管
D. 容量瓶
【单选题】
鉴定Ni2+的试剂通常是下列中的哪一种?___
A. 丁二酮肟
B. 硝基苯偶氮间苯二酚
C. 二苯基联苯胺
D. 硫脲
【单选题】
实验室安全知识:因电器失火,应用下列哪种灭火器?___
A. 泡沫灭火器
B. CO2灭火器
C. 干粉灭火器
D. CCl4灭火器
【单选题】
用邻苯二甲酸氢钾标定NaOH溶液浓度时,会造成系统误差的是___
A. 用甲基橙作指示剂
B. NaOH溶液吸收了空气中CO2
C. 每份邻苯二甲酸氢钾质量不同
D. 每份加入的指示剂量不同
【单选题】
有效数字位数是四位的数值是:___
A. 0.0002
B. 0.1000
C. 0.700×102
D. pH=12.80
【单选题】
某同学用硼砂标定标准溶液实验中,溶解硼砂时,用玻棒去搅拌锥形瓶中溶液后,不经处理拿出瓶外,标定结果会:___
A. 偏高
B. 偏低
C. 不一定
D. 无影响
【单选题】
分析过程中出现下面情况,哪些将造成系统误差:___
A. 天平零点突然有变动
B. 分光光度计的最后有波动
C. 滴定管读数最后一位估不准
D. 以含量为98%的硼砂标定HCl浓度
【单选题】
阴离子分离鉴定实验中,Br2在CCl4层显示什么颜色?___
A. 橙色
B. 紫红色
C. 蓝色
D. 黄色
【单选题】
标定NaOH溶液的常用基准物质:___
A. 无水碳酸钠
B. 邻苯二甲酸氢钾
C. 硼砂
D. CaCO3
【单选题】
用K2Cr2O7基准物质配制0.01667mol·L-1溶液一升,下列操作中合适的是:___
A. 在分析天平上用差减法准确称取K2Cr2O74.903克
B. 以直接称量法用称量纸在分析天平上称取4.903克
C. 用600ml烧杯以直接称量法在台天平上称得4.9克
D. 以直接称量法用称量纸在台天平上称取4.9克
【多选题】
在反应转化速率测定的实验中,影响转化速率的因素有:___
A. 反应物浓度
B. 反应时间
C. 反应温度
D. 催化剂
【多选题】
某学生交给老师的实验报告上有以下四个数据,其中测量数据合理的是___
A. 用量筒量取5.13mL盐酸
B. 用托盘天平称取11.7g氯化钠固体
C. 用广泛PH试纸(pH值由1—14)测得某溶液的pH值为2.2
D. 在中和滴定时,用去氢氧化钠溶液的体积为21.82mL。
【多选题】
用EDTA滴定法测定Al3+含量时,采用:___
A. 返滴定法
B. PAN作指示剂
C. 铬黑T作指示剂
D. 自指示剂
【填空题】
将固体和溶液分离的常用实验方法___、___和___。
【填空题】
鉴定Fe3+离子可用(),鉴定Fe2+可用(),它们均生成蓝色沉淀()。
【填空题】
实验室常用的鉴定Mn2+的试剂有(),其相应的反应方程式为()。
【填空题】
使用离心机离心应注意的关键之点是___。
【填空题】
化学实验室常用的干燥剂变色硅胶无水时呈___色,随着吸水程度的增大,逐渐变为___色,最终呈___色失效,需重新烘干才能使用。
【填空题】
第一过渡系列金属中,其金属氢氧化物呈两性的有()。
【填空题】
在本学期,实验室中有一黑色钢瓶,很可能装有___气体,钢瓶内气体的状态___。
【填空题】
酒精喷灯在使用时灯管应先___,否则会出现___现象。
【填空题】
在制备[Cu(NH3)4]SO4时,[Cu(NH3)4]SO4溶液中加入95%的乙醇的目的是()。
【填空题】
10mL0.2mol/L的HAc溶液与10mL0.1mol/L的NaOH溶液混合,得到的溶液具有()作用,其pH为()。(pK(HAc=4.76)
【填空题】
11.如被酸灼伤时可用1%的___水溶液处理如被碱灼伤可用1%的___水溶液处理。
【填空题】
12.在进行玻璃管切断时,先___,再___。