【判断题】
镦粗加工工艺最好用于塑性好,延展性大的金属材料台阶轴或双联齿轮等毛坯件加工
A. 对
B. 错
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
A
解析
暂无解析
相关试题
【判断题】
为了保证大型设备基础的承载能力,一般采用钢筋温凝土整体浇灌的结构
A. 对
B. 错
【判断题】
多段床身接合面刮削时,将被刮的接合面端用枕木垫高的目的是便于刮研
A. 对
B. 错
【判断题】
更换清单,由主管工艺人员提出,由备件人员核定出价格,更换件包括机械,电器,液(气)压的备配件和外购件
A. 对
B. 错
【判断题】
任何提高劳动生产率的措施,都必须以经济效益为前提
A. 对
B. 错
【判断题】
精密机床导轨在的粗糙度要求是:每25mm×25mm在16~20点
A. 对
B. 错
【判断题】
工作台要牢固平稳,平台周围要保持整洁,通行要方便,1米内禁止堆放物件
A. 对
B. 错
【判断题】
两孔轴线相交成 90°角,一个孔直径为φ20mm,另一个孔直径是φ30mm,应该先钻穿直径大的孔
A. 对
B. 错
【判断题】
碳素工具钢和合金工具钢用于制造中、低速成型刀具
A. 对
B. 错
【判断题】
经纬仪整平时,经反复调整,直到仪器转到任意位置时,水准气泡最大偏离值小于二分之一格为止
A. 对
B. 错
【判断题】
刮削大型机床导轨面时,应在将导轨面上的零件全部拆除后进行,以保证刮削质量
A. 对
B. 错
【判断题】
要安排好培训计划,做好上课的准备工作,做到有组织,有计划地进行培训,做到定时间,定地点,定内容,定进度,定要求,有练习,有考核
A. 对
B. 错
【判断题】
轨道制作主要是轨道调直和接头,调直后对轨道进行编号,两条轨道上从端部或伸缩缝处算起,轨道接头至少要对齐,以使运转平稳
A. 对
B. 错
【判断题】
为实现电动机连续正转运行需采用具有接触器自锁的控制线路和手动正转控制回路
A. 对
B. 错
【判断题】
在修理带传动机构时,发现带轮孔超差额0.08mm,造成配合过松,一般可用镀铬法来加大轴颈尺寸
A. 对
B. 错
【判断题】
用经纬仪和平行光管测量机床转台分度误差时,应用专用心轴配装在转台中心孔中将经纬仪和心轴紧固联接在一起
A. 对
B. 错
【判断题】
采用双螺母螺纹式调整滚珠丝杠轴向间隙的方法结构紧凑,调整方便,应用广泛
A. 对
B. 错
【判断题】
若自准直仪上读数鼓轮每格角值分度值为1",则其线值分度值可用0.05mm/m表示
A. 对
B. 错
【判断题】
所有的紫色酒精,在 1 米内不准点有明火,不准放在暖气片上
A. 对
B. 错
【判断题】
固定式装配适用于单件和小批量模具的装配,以及装配精度要求较高,需要调整的部位较多的装配
A. 对
B. 错
【判断题】
我国对企业发生的事故,坚持“四不放过”原则进行处理
A. 对
B. 错
【判断题】
齿轮的齿侧间隙分为12 个等级
A. 对
B. 错
【判断题】
在机械设备中,凸轮表面误差将会引起扭转振动
A. 对
B. 错
【单选题】
What happens to the status of users already logged into ESXi Shell when a vSphere administrator enables lockdown mode?___
A. Users remain logged in and can run commands, except to disable lockdown mode.
B. Users remain logged in and can run commands, including disabling lockdown mode.
C. Users are immediately logged out of ESXi Shell.
D. Users are logged out after a timeout specified by the vSphere administrator.
【单选题】
What is the effective vSphere licensing level during the 60 day evaluation period?___
A. vSphere Foundation Essentials Plus
B. vSphere Standard
C. vSphere Enterprise
D. vSphere
E. nterprise Plus
【单选题】
To comply with security requirements, an administrator with a vCenter Server Appliance needs to force logoff of the vSphere web client after 10 minutes of inactivity.What should the administrator do to meet the requirement?___
A. Edit: /var/lib/vmware/vsphere-client/webclient.properties, modify session.timeout=10
B. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=600
C. Edit: /var/lib/vmware/vsphere-client/webclient.properties modify session.timeout=600
D. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=10
【单选题】
An administrator enables High Availability (HA) on a Virtual SAN cluster.Which network is used for HA Network Heatbeat configuration?___
A. The Management network.
B. The vMotion network.
C. The Virtual SAN network.
D. The Provisioning Traffic network.
【单选题】
A user wants to monitor a business-critical virtual machine to ensure that it doesn't run out of resources. What metric could be monitored in vRealize Operations to address this concern?___
A. Time Remaining badge
B. Compliance badge
C. Reclaimable Waste badge
D. Density badge
【单选题】
An administrator has recently installed a new ESXi 6.x Host, and during the configuration notices sporadic network problems. To check whether the issue occurred sometime during the configuration, the administrator would like to reset the system.How can this be accomplished in the shortest amount of time?___
A. Run the ESXi installer again and reinstall the host.
B. Select the Reset System Configuration option from the vSphere Client when connected directly to the host.
C. From the
D. irect Console User Interface, select Reset System Configuration.
【单选题】
A vApp is running out of compute resources when overall activity is high within the resource pool. At other times, everything is fine.What should be done to resolve this issue?___
A. Increase the size of the resource pool Shares.
B. Set the vApp's CPU and Memory Reservation Type to Expandable.
C. Set the vApp's CPU and Memory Limit to Unlimited.
D. Create a new resource pool with the existing hardware configuration.
【单选题】
A virtual machine has been renamed and an administrator is unable to find files with the new virtual machine name in the datastore.What is the reason for this?___
A. The names of the files on the datastore do not change.
B. The names of the files on the datastore have been corrupted.
C. The virtual machine needs to be re-added to the inventory.
D. The Distributed Resource Scheduler moved the virtual machine to another host.
【单选题】
An administrator has configured network connectivity for a new virtual machine, as shown in the Exhibit.What will occur with the network traffic of this virtual machine when communicating externally from vSwitch1?___
A. The virtual machine will communicate on both uplinks
B. The virtual machine will only communicate on vmnic1
C. The virtual machine will only communicate on vmnic2
D. The virtual machine will fail to communicate externally
【单选题】
An administrator is unable to create the first group in a new vRealize Operations environment. What is the likely cause of the problem?___
A. There are no group types defined.
B. The group is not defined in SSO.
C. There are more than 32 group types defined.
D. The description for the group is not provided.
【单选题】
A new vApp was built and tested in the corporate headquarters datacenter running vSphere 6.x. What condition would explain why the virtual machine is failing to boot in an offsite datacenter running on vSphere 5.5?___
A. The virtual machine was built with the default hardware version.
B. The VMFS 5 datastore is not compatible with virtual machines configured with vSphere 6.x.
C. a
D. RS 5.5 cluster cannot run virtual machines configured with vSphere 6.x.
【单选题】
An administrator is evaluating whether to deploy vCenter Server on a Windows server or on a vCenter Server appliance. The administrator has the following requirements: <A web browser will be utilized to manage the vSphere environment.> <16 ESXi hosts will be deployed.> <Licenses must be shared with a vCenter Server at another site.> <An external Oracle 10g database server will be used to host the vCenter Server database.> Why will the administrator need to deploy vCenter Server on a Windows server?___
A. Linked Mode is a requirement for the solution.
B. Oracle 10g is a requirement for the solution.
C. The vSphere web client is a requirement for the solution.
D. Management of more than 5 hosts is a requirement for the solution.
【单选题】
What is a benefit of using VMware Data Protection ?___
A. Provides support for guest-level backups and restores of Microsoft SQL Servers, Exchange Servers, and Share Point Servers.
B. Provides support for advanced storage services including replication, encryption, deduplication, and compression.
C. Provides direct access to VDP configuration integrated into the vSphere Client.
D. Reduces disk space consumed by virtual machine data using deduplication.
【单选题】
An administrator enables vSphere High Availability (HA) on an existing cluster with a large number of hosts and virtual machines. The administrator notices that the setup of vSphere HA on some of the hosts is failing. What step, if taken, might resolve this issue?___
A. Increase the value of the config.vpxd.das.electionWaitTimeSec setting.
B. Set the value of vpxd.das.aamMemoryLimit to 256.
C. Set the value of the das.useDefaultIsolationAddress setting to False.
D. Increase the value of the das.iostatsinterval setting.
【单选题】
An ESXi 6.x host consists of 24 logical cores. Hyperthreading is enabled on the host. What is the maximum number of vCPUs that can be assigned to a virtual machine on this host?___
A. 24
B. 48
C. 64
D. 128
【单选题】
By default, each ESXi 6.x host is provisioned with a certificate from which root certificate authority?___
A. RedHat Certificate Authority
B. VMware Certificate Authority
C. DigiCert Certificate Authority
D. Verisign Certificate Authority
【单选题】
An administrator is adding an NFS datastore as shown in the Exhibit. What is the purpose of the Servers to be added list?___
A. It contains the IP addresses of the NFS Storage Server to provide multipathing capability.
B. It contains the IP addresses of the ESXi hosts that mount the datastore.
C. It contains the IP addresses used for
D. ynamic Discovery of targets.
【单选题】
An administrator reports that the System Event log data is only available for 24 hours when reviewing the Hardware Status tab. Which condition could be responsible for the loss of data?___
A. A Reset event log was executed.
B. The statistical collection level was set to a value of 1.
C. The boot disk of the host is corrupt.
D. Syslog has been configured at the vCenter Server level.
推荐试题
【单选题】
RA收发机风扇的115VAC电源来自:___
A. A.主暗测试电路.
B. B.设备冷却系统.
C. C.空调系统.
D. D.RA收发机.
【单选题】
RA系统的收发机位于:___
A. A.主电子设备舱
B. B.前电子设备舱
C. C.前货舱
D. D.后货舱
【单选题】
TCAS的数据显示在:___
A. A.PFD
B. B.ND
C. C.ECAM
D. D.PFD&ND
【单选题】
WR的天线稳定信号来自:___
A. A.ADIRU1
B. B.ADIRU2
C. C.ADIRU3
D. D.ADIRU1或ADIRU3
【单选题】
WR系统的两种故障之中,导致雷达图象消失的是:___
A. A.WXRWEAK
B. B.WXRATT
C. C.WXRSTAB
D. D.WXRANT
【单选题】
比TCAS警告具更高优先权的设备是:(按顺序)___
A. A.风切变,GPWS信息,失速
B. B.失速,GPWS信息,风切变
C. C.风切变,失速,GPWS信息
D. D.GPWS信息,失速,风切变
【单选题】
对于WR系统的故障,ND上有可能显示的红色信息是:___
A. A.WXR.WEAK.
B. B.WXR.STAB.
C. C.WXRRNG.
D. D.WXR.TEST.
【单选题】
红色RA故障代替RA高度信息显示在PFD上说明:___
A. A.襟翼/缝翼手柄不在0位,两台RA失效。
B. B.两台RA无效,与襟翼/缝翼无关。
C. C.PFD1上RA表示1号RA失效。
D. D.PFD1上RA表示2号RA失效。
【单选题】
可以使FWC产生失速的音响警告的测试是:___
A. A.交联测试
B. B.AOA传感器测试
C. C.系统测试
D. D.输出测试
【单选题】
能看到绛红色VOR台标识的ND工作方式是:___
A. A.ROSE–NAV
B. B.ROSE–VOR
C. C.ROSE–ILS
D. D.PLAN
【单选题】
如果ADR1故障,为恢复显示应:___
A. A.将ATTHDG电门置于CAPT3位置
B. B.将AIRDATA电门置于CAPT3位置
C. C.将AIRDATA电门置于F/O3位置
D. D.将ATTHDG电门置于F/O3位置
【单选题】
使用RA系统的主要飞行阶段有:___
A. A.起始爬升阶段.
B. B.进近阶段.
C. C.着陆阶段.
D. D.以上各阶段.
【单选题】
完成ILS备份调谐方式控制的是:___
A. A.FMGC
B. B.MCDU
C. C.RMP1或RMP2
D. D.任何一个RMP。
【单选题】
完成MKR系统控制的是:___
A. A.VOR控制面板
B. B.EFIS控制面板
C. C.MCDU
D. D.无须任何控制,是工作在固定频率上的
【单选题】
无线电导航系统的调谐方式有:___
A. A.二种
B. B.三种
C. C.四种
D. D.五种
【单选题】
向TCAS计算机提供气压高度数据的是:___
A. A.RA
B. B.ATC
C. C.ADIRU
D. D.GPWC
【单选题】
以下不属于大气数据系统传感器输入的是:___
A. A.三个皮托管.
B. B.六个静压孔.
C. C.三个A0A及二个TAT传感器.
D. D.三个动压ADM及六个静压ADM.
【单选题】
由MCDU对ADIRS进行当前位置输入的方法有:___
A. A.一种
B. B.二种
C. C.三种
D. D.四种
【单选题】
在ADIRS中,FCU给ADIRU提供的信息是:___
A. A.启动校准及测试。
B. B.方式选择。
C. C.大气数据参数。
D. D.气压修正。
【单选题】
在ADIRS中,接收所有三个ADIRU信息的DMC是:___
A. A.DMC1
B. B.DMC2
C. C.DMC3
D. D.DMC1&2
【单选题】
在ECAM上显示的TAT及SAT信息来自:___
A. A.ADR1或ADR3。
B. B.ADR2或ADR3。
C. C.ADR1或ADR2。
D. D.所有ADR。
【单选题】
在ND上要见到DME地面台显示符须:___
A. A.按压EFIS控制面板上的V0R.D电门.
B. B.选择了EFIS控制面板上的ROSE全罗盘方式.
C. C.选择了EFIS控制面板上的ARC半罗盘方式.
D. D.C并且A才有可能.
【单选题】
在R的InterfaceTest(交联测试)中,其抑制条件是:___
A. A.地速大于或等于30节.
B. B.IR在NAV方式.
C. C.IR在ATT方式.
D. D.D.A和C都是.
【单选题】
在导航系统中,显示磁航向数据的仪表有:___
A. A.ND.
B. B.PFD.
C. C.备用罗盘.
D. D.以上都有可能.
【单选题】
属于自备式导航系统的有:___
A. A.WR,ATC,GPWS,RA.
B. B.TCAS,GPWS,V0R,ADF.
C. C.RA,WR,TCAS,GPWS.
D. D.V0R,ADF,ATC,D扎伍.
【单选题】
SAARU通过_____________得到28VDC电源.___
A. A.在P110左电源管理面板上的ADIRUPRIPWRL电路跳开关
B. B.在左电源供应组件上的SAARU电路跳开关
C. C.在中央电源供应组件上的SAARU电路跳开关
D. D.在P11顶部跳开关面板上的SAARU电路跳开关
【单选题】
当FMCF失效时,CDU不具备的功能是:___
A. A.备用导航无线电调协.
B. B.计算LNAV指令.
C. C.备份地图数据.
D. D.计算VNAV指令.
【单选题】
全球定位系统(GPS)位置数据呈现在:___
A. A.维护存取终端(MAT)的右上角
B. B.控制显示组件(CDU)上的位置初始页(POSINIT)
C. C.导航显示(ND)的左下角
D. D.在主飞行显示(PFD)的左下角
【单选题】
ATC/TCAS控制面板上的ATC故障灯亮表示:___
A. A.所选的ATC应答机有故障.
B. B.系统正在进行功能测试.
C. C.系统正在进行灯泡测试.
D. D.以上情况皆有可能.
【单选题】
ATC控制面板上的ATCFAIL灯亮表示:___
A. A.选定的应答机故障
B. B.在进行功能测试
C. C.在进行灯泡检测
D. D.以上全对
【单选题】
ATC系统的收、发频率与TCAS的正好相反,它们分别是:___
A. A.1030MHZ,1030MHZ
B. B.1030MHZ,1090MHZ
C. C.1090MHZ,1030MHZ
D. D.1090MHZ,1090MHZ
【单选题】
DME的天线能否与ATC的天线互换:___
A. A.不能,它们不是同一个系统
B. B.不能,但可以用DME换ATC
C. C.不能,但可以用ATC换DME
D. D.能
【单选题】
EFIS方式中不能显示WR图象及状态信息的方式是:___
A. A.ARC
B. B.ROSE
C. C.MAP
D. D.PLAN
【单选题】
ILS2故障时:___
A. A.ECAM显示玻王白色的独立故障.
B. B.有多谐音产生
C. C.在3,4,5飞行阶段警告抑制.
D. D.红色主警告灯亮
【单选题】
ILS数据显示在ND上的条件是:___
A. A.只要按压了EFISCP上的ILS电门
B. B.只要选择了ROSE/ILS方式
C. C.A或B
D. D.在EFISCP上选择了ROSE/ILS方式并且按压了ILS电门.
【单选题】
LGC阳不直接送信号给的询问机(计算机,接收机,应答机)是:___
A. A.DME.
B. B.GPWC.
C. C.ADF.
D. D.ATC.
【单选题】
RA系统的高度数据的显示方式有:___
A. A.一种
B. B.二种
C. C.三种
D. D.四种
【单选题】
TAD功能在ND上显示的信息是:___
A. A.高度数据信息
B. B.地速数据信息
C. C.地形数据信息
D. D.跑道数据信息
【单选题】
TCAS的接收及发射频率分别为:___
A. A.1030MHZ,1090MHZ.
B. B.1030MHZ,1030MHZ
C. C.1090MHZ,1030MHZ.
D. D.1090MHZ,1090MHZ.
【单选题】
VOR信息显示在:___
A. A.CAPTPFD及ND;F/OPFD及ND
B. B.CAPT及F/0的PFD
C. C.CAPT及F/0的ND
D. D.CAPT及F/0的PFD及ND,DDRMI