【单选题】
如果FMGC1故障，那么在FMA自动驾驶衔接状态栏显示___
A. 1FD1
B. 1FD-
C. 2FD2
D. 2FD-
查看试卷，进入试卷练习
微信扫一扫，开始刷题
答案
C
解析
暂无解析
相关试题
【单选题】
关于FD下列说法错误的是，___
A. 当一个横向模式(LATERALMODE)激活后,ROLLBAR出现
B. 当一个纵向模式（VERTICALMODE)激活后，ROLLBAR出现
C. 起飞时，无线电高度低于30英尺，LOC信号截获，YAWBAR出现
D. 无论在哪个飞行阶段，YAWBAR和ROLLBAR都不能同时出现
【单选题】
关于A/THR,下列说法错误的是___
A. A/THR的功能包括推力保持和速度保持
B. A/THR可以自动衔接也可以人工衔接
C. A/THR可以自动断开也可以人工断开
D. A/THR衔接后，只有两个推力手柄都在CLMB位，A/THR才能激活
【单选题】
A/THR已衔接，飞机起飞后，下列哪种情况下A/THR不能激活___
A. 推力手柄放到CL位
B. 推力手柄在IDLE和CL之间
C. 推力手柄放在FLX位
D. 出现ALPHAFLOOR
【单选题】
如果在FMA自动驾驶衔接状态栏出现白色A/THR字符，则表示：___
A. A/THR已衔接但未激活
B. A/THR未衔接
C. A/THR已衔接，并且已激活
D. A/THR未衔接，并且未激活
【单选题】
关于低能警告，下列说法错误的是___
A. 低能警告的触发和迎角有关
B. 低能警告的触发和飞机构型有关
C. 低能警告的触发和飞机速度有关
D. 如果触发低能警告，则ALPHAFLOOR将被抑制
【单选题】
如果FMGC1的FM部分故障，那么___
A. MCDU1上显示INDEPENDENTOPERATION
B. MCDU1上显示OPPFMGCINPROGRESS
C. MCDU2上显示OPPFMGCINPROGRESS
D. MCDU2上显示FMS1/FMS2ACSTSDIFF
【单选题】
对FMGC功能描述错误的有___
A. 计算操作指令发送给飞控计算机（EFCS）
B. 计算飞机当前位置
C. 导航设备调谐
D. 计算襟缝翼操作指令发送给SFCC襟缝翼控制手柄
【单选题】
在巡航阶段中，如果AP1突然断开，那么___
A. AP2自动接替工作
B. 飞机保持当前实际姿态，直至AP重新衔接或驾驶员通过侧杆人工操作
C. 飞机保持水平直线飞行，直至AP重新衔接或驾驶员通过侧杆人工操作
D. 飞机将不能保持当前实际姿态
【单选题】
关于AFS系统各计算机功能，下列说法错误的是___
A. 正常情况下，VOR1是由FMGC1进行调谐
B. 如果FAC1中FIDS功能失效，FAC2中的FIDS功能会自动接替(FIDS功能只在FAC1有效)
C. FMGC计算目标推力（THURSTTARGET)通过FCU发送给FADEC
D. 可以通过方向舵配平选择开关对方向舵进行人工配平
【单选题】
关于低能警告（LOWENERGYWARNING)，下列说法错误的是___
A. 低能警告和飞机当前飞行航迹角（FPA）有关
B. 低能警告仅在低高度（100ft-2000ft)有效
C. 触发低能警告后，发动机自动将推力提高到TO-GA
D. 低能警告和飞机当前速度有关
【单选题】
关于FAC风切变探测功能，下列说法正确的是___
A. FAC通过接收来自气象雷达的信息计算风切变警告
B. 如果将FACs的按钮开关置于OFF位，则风切变探测功能失效
C. 如果FAC探测到风切变，扬声器会发出警告语音“WINDSHEAR、WINDSHEAR、WINDSHEAR"
D. 如果FAC探测到风切变，扬声器会发出警告语音“GOAROUNDWINDSHEARAHEAD"
【单选题】
如果A/THR已衔接，那么下列哪种情况可以使其激活___
A. 至少有一个推力手柄高于MCT位
B. 两个推力杆都高于CL位
C. 至少有一台发动机工作在灵活起飞模式，并且没有出现迎角保护
D. 两个推力杆都位于0和CL之间
【单选题】
如果A/THR工作在RETARD模式时，AP被人工断开，那么___
A. A/THR自动断开衔接
B. A/THR依然保持衔接，但转为未激活状态
C. 依然处于激活状态，并且依然工作在RETARD模式
D. 依然处于激活状态，但工作模式转为速度保持
【单选题】
关于A/THR断开,下列说法错误的是___
A. 如果通过按压FCU上A/THR衔接电门来断开A/THR，那么发动机的推力将立即转换至推力手柄当前位置所对应推力值
B. 通过按压推力手柄上A/THR断开按钮来断开A/THR，如果这时双发推力手柄都在档位中（indetent),那么发动机将工作在A/THR断开前的推力
C. 如果通过按压FCU上A/THR衔接电门来断开A/THR，那么发动机的推力将保持在A/THR断开前的推力值
D. 通过按压推力手柄上A/THR断开按钮来断开A/THR，如果这时双发推力手柄都不在档位中（notindetent),那么发动机的推力将平稳的转换至推力手柄当前位置所对应的推力值
【单选题】
关于FAC计算机下列说法错误的是___
A. 如果一个YAWDAMPPER作动筒故障，只会导致相应的FAC的YAWDAMPPER功能失效，不会导致整个计算机断开衔接。
B. FAC加电30s内，FAC无法衔接
C. 在飞行中，可以通过松出再按入衔接电门的方法重置FAC
D. 当FAC的衔接电门被松出，按钮上OFF灯亮，则说明整个FAC计算机断电失效
【单选题】
下列哪项功能是由FMGC完成的___
A. 管理模式下目标速度的计算
B. 协调避撞模式（RA)下升降速度的计算
C. CAT3着陆模式下，最大放出襟缝翼速度的计算
D. 速度保持模式下，燃油流量的计算
【单选题】
AP衔接状态下，YAWDAMPPER指令由哪个计算机计算___
A. 巡航模式时由FMGC计算
B. 着陆模式时由ELAC计算
C. 着陆模式时由FAC计算
D. 着陆模式时由FMGC计算
【单选题】
关于YAWDAMPPER的功能下列说法正确的是___
A. 如果AP没有衔接，则YAWDAMPPER将失去发动机故障补偿的功能
B. 如果AP没有衔接，YAWDAMPPER将失去荷兰滚阻尼的功能
C. 如果AP衔接在LAND模式，则协调转弯指令由FMGC计算
D. 如果AP衔接在TAKE-OFF模式，则发动机故障补偿指令由FMGC计算。
【单选题】
下列哪种情况下服务内话不能工作？___
A. 飞机在空中构型但接通了地面电源
B. 飞机在地面构型
C. 飞机在空中构型且设置停留刹车
D. 飞机在空中构型且勤务内话的操控按钮放在ON位
【单选题】
关于VHF的频率，下列说法正确的是？___
A. 2.8-23.999MHZ,每个通道间隔1KHZ
B. 118-136.975MHZ,每个通道间隔25KHZ
C. 2.8-23.999MHZ,每个通道间隔2KHZ
D. 118-136.975MHZ,每个通道间隔50KHZ
【单选题】
关于选择呼叫，下列说法正确的是？___
A. 相关无线电设备实时扫描得到的信号和本机选择呼叫面板的输入代码相比较，一致则给出选择呼叫的提示
B. 呼叫飞机人员通过二次雷达定位，选择呼叫特定的飞机
C. 机组人员接收到选择呼叫后，在ACP上会有琥珀色的灯光提示
D. A、C都对
【单选题】
AMU的功用是___
A. 对通讯系统的频率进行选择和调谐
B. 采集驾驶舱的语音通讯并直接送到话音记录器
C. 对通讯系统和导航系统的音频进行处理并输出到相应的系统
D. 以上都不对
【单选题】
在CIDS系统中，DEUB的用途是___
A. 主要用于机组（包括乘务员）的一些功能实现
B. 主要用于旅客的一些功能实现
C. 作为DEUA的备用，在DEUA失效时使用
D. DEUA为DEUB的备用
【单选题】
关于RMP面板，下列说法正确的是？___
A. RMP1主要负责对VHF1,HF1的调谐，RMP2主要负责对VHF2和HF2的调谐
B. RMP1主要负责对VHF1调谐，RMP2主要对VHF2调谐，RMP3主要负责对HF1,HF2,VHF3调谐
C. 当RMP1故障的时候，VHF1,HF1则失效，用VHF3,HF3代替其工作。
D. 以上说法都对
【单选题】
ACESSBUS可以由什么供电?___
A. A.ACBUS1或ACBUS2或应急发电机或静变流机
B. B.ACBUS1或ACBUS2
C. C.ACBUS1或应急发电机
D. D.ACBUS2或静变流机
【单选题】
EGIU（电源发电接口组件）的功能是:___
A. A．把GCU和GPCU来的模拟信号转换为ARINC429数据信号
B. B．把GCU和GPCU来的模拟和离散信号转换为ARINC429数据信号
C. C．把GCU和GPCU来的离散信号转换为ARINC429数据信号
D. D．以上都不正确
推荐试题
【单选题】
What happens to the status of users already logged into ESXi Shell when a vSphere administrator enables lockdown mode?___
A. Users remain logged in and can run commands, except to disable lockdown mode.
B. Users remain logged in and can run commands, including disabling lockdown mode.
C. Users are immediately logged out of ESXi Shell.
D. Users are logged out after a timeout specified by the vSphere administrator.
【单选题】
What is the effective vSphere licensing level during the 60 day evaluation period?___
A. vSphere Foundation Essentials Plus
B. vSphere Standard
C. vSphere Enterprise
D. vSphere
E. nterprise Plus
【单选题】
To comply with security requirements, an administrator with a vCenter Server Appliance needs to force logoff of the vSphere web client after 10 minutes of inactivity.What should the administrator do to meet the requirement?___
A. Edit: /var/lib/vmware/vsphere-client/webclient.properties, modify session.timeout=10
B. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=600
C. Edit: /var/lib/vmware/vsphere-client/webclient.properties modify session.timeout=600
D. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=10
【单选题】
An administrator enables High Availability (HA) on a Virtual SAN cluster.Which network is used for HA Network Heatbeat configuration?___
A. The Management network.
B. The vMotion network.
C. The Virtual SAN network.
D. The Provisioning Traffic network.
【单选题】
A user wants to monitor a business-critical virtual machine to ensure that it doesn't run out of resources. What metric could be monitored in vRealize Operations to address this concern?___
A. Time Remaining badge
B. Compliance badge
C. Reclaimable Waste badge
D. Density badge
【单选题】
An administrator has recently installed a new ESXi 6.x Host, and during the configuration notices sporadic network problems. To check whether the issue occurred sometime during the configuration, the administrator would like to reset the system.How can this be accomplished in the shortest amount of time?___
A. Run the ESXi installer again and reinstall the host.
B. Select the Reset System Configuration option from the vSphere Client when connected directly to the host.
C. From the
D. irect Console User Interface, select Reset System Configuration.
【单选题】
A vApp is running out of compute resources when overall activity is high within the resource pool. At other times, everything is fine.What should be done to resolve this issue?___
A. Increase the size of the resource pool Shares.
B. Set the vApp's CPU and Memory Reservation Type to Expandable.
C. Set the vApp's CPU and Memory Limit to Unlimited.
D. Create a new resource pool with the existing hardware configuration.
【单选题】
A virtual machine has been renamed and an administrator is unable to find files with the new virtual machine name in the datastore.What is the reason for this?___
A. The names of the files on the datastore do not change.
B. The names of the files on the datastore have been corrupted.
C. The virtual machine needs to be re-added to the inventory.
D. The Distributed Resource Scheduler moved the virtual machine to another host.
【单选题】
An administrator has configured network connectivity for a new virtual machine, as shown in the Exhibit.What will occur with the network traffic of this virtual machine when communicating externally from vSwitch1?___
A. The virtual machine will communicate on both uplinks
B. The virtual machine will only communicate on vmnic1
C. The virtual machine will only communicate on vmnic2
D. The virtual machine will fail to communicate externally
【单选题】
An administrator is unable to create the first group in a new vRealize Operations environment. What is the likely cause of the problem?___
A. There are no group types defined.
B. The group is not defined in SSO.
C. There are more than 32 group types defined.
D. The description for the group is not provided.
【单选题】
A new vApp was built and tested in the corporate headquarters datacenter running vSphere 6.x. What condition would explain why the virtual machine is failing to boot in an offsite datacenter running on vSphere 5.5?___
A. The virtual machine was built with the default hardware version.
B. The VMFS 5 datastore is not compatible with virtual machines configured with vSphere 6.x.
C. a
D. RS 5.5 cluster cannot run virtual machines configured with vSphere 6.x.
【单选题】
An administrator is evaluating whether to deploy vCenter Server on a Windows server or on a vCenter Server appliance. The administrator has the following requirements: <A web browser will be utilized to manage the vSphere environment.> <16 ESXi hosts will be deployed.> <Licenses must be shared with a vCenter Server at another site.> <An external Oracle 10g database server will be used to host the vCenter Server database.> Why will the administrator need to deploy vCenter Server on a Windows server?___
A. Linked Mode is a requirement for the solution.
B. Oracle 10g is a requirement for the solution.
C. The vSphere web client is a requirement for the solution.
D. Management of more than 5 hosts is a requirement for the solution.
【单选题】
What is a benefit of using VMware Data Protection ?___
A. Provides support for guest-level backups and restores of Microsoft SQL Servers, Exchange Servers, and Share Point Servers.
B. Provides support for advanced storage services including replication, encryption, deduplication, and compression.
C. Provides direct access to VDP configuration integrated into the vSphere Client.
D. Reduces disk space consumed by virtual machine data using deduplication.
【单选题】
An administrator enables vSphere High Availability (HA) on an existing cluster with a large number of hosts and virtual machines. The administrator notices that the setup of vSphere HA on some of the hosts is failing. What step, if taken, might resolve this issue?___
A. Increase the value of the config.vpxd.das.electionWaitTimeSec setting.
B. Set the value of vpxd.das.aamMemoryLimit to 256.
C. Set the value of the das.useDefaultIsolationAddress setting to False.
D. Increase the value of the das.iostatsinterval setting.
【单选题】
An ESXi 6.x host consists of 24 logical cores. Hyperthreading is enabled on the host. What is the maximum number of vCPUs that can be assigned to a virtual machine on this host?___
A. 24
B. 48
C. 64
D. 128
【单选题】
By default, each ESXi 6.x host is provisioned with a certificate from which root certificate authority?___
A. RedHat Certificate Authority
B. VMware Certificate Authority
C. DigiCert Certificate Authority
D. Verisign Certificate Authority
【单选题】
An administrator is adding an NFS datastore as shown in the Exhibit. What is the purpose of the Servers to be added list?___
A. It contains the IP addresses of the NFS Storage Server to provide multipathing capability.
B. It contains the IP addresses of the ESXi hosts that mount the datastore.
C. It contains the IP addresses used for
D. ynamic Discovery of targets.
【单选题】
An administrator reports that the System Event log data is only available for 24 hours when reviewing the Hardware Status tab. Which condition could be responsible for the loss of data?___
A. A Reset event log was executed.
B. The statistical collection level was set to a value of 1.
C. The boot disk of the host is corrupt.
D. Syslog has been configured at the vCenter Server level.
【单选题】
During an upgrade, the ESXi 6.x installer finds an existing version of ESXi and a VMFS3 volume. No virtual machines exist on the host or VMFS3 volume. The requirement is to upgrade to VMFS5. Which option should be chosen to meet this requirement?___
A. Upgrade ESXi and preserve the VMFS datastore
B. Install ESXi and preserve the VMFS datastore
C. Install ESXi and overwrite the VMFS datastore
D. Upgrade
E. SXi and overwrite the VMFS datastore
【单选题】
A vSphere 6.x Standard Switch is configured with 4 virtual machine portgroups, as shown in the exhibit. Which portgroup would be utilized by default when creating a new virtual machine?___
A. Access Network
B. DMZ Network
C. VM Network
D. Virtual Machine Network
【单选题】
Which vSphere 6.x feature will allow an organization to utilize native snapshots?___
A. Virtual Volumes
B. Virtual SAN
C. VMFS3
D. VMFS5
