【单选题】
空气处理单元可以保证车内空气的 。 ___
A. 蒸发器
B. 节流装置
C. 气流组织
D. 冷凝器
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
C
解析
暂无解析
相关试题
【单选题】
输送分配到车内的空气通过 时温度被吸收,空气中部分水蒸气在蒸发器表面凝结成水滴。 ___
A. 通风机
B. 节流装置
C. 蒸发器
D. 冷凝器
【单选题】
空气处理单元主要由通风机组、 、电加热器和空气过滤器等组成。 ___
A. 储液器
B. 冷凝器
C. 气液分离器
D. 蒸发器
【单选题】
空气处理单元主要由通风机组、 、蒸发器和空气过滤器等组成。 ___
A. 储液器
B. 冷凝器
C. 气液分离器
D. 电加热器
【单选题】
空气处理单元主要由蒸发器、 、电加热器和空气过滤器等组成。 ___
A. 储液器
B. 冷凝器
C. 气液分离器
D. 通风机组
【单选题】
压缩冷凝单元的作用的是,确保了天热车内空气的温度与 维持在设定的范围内。 ___
A. 热度
B. 洁净度
C. 浑浊度
D. 相对湿度
【单选题】
压缩冷凝单元主要由 、冷凝器、冷凝风机、贮液器等组成。 ___
A. 压缩机
B. 电加热器
C. 废排风机
D. 蒸发器
【单选题】
压缩冷凝单元主要由 、压缩机、冷凝风机、冷凝器等组成。 ___
A. 废排风机
B. 电加热器
C. 蒸发器
D. 贮液器
【单选题】
压缩冷凝单元主要由 、压缩机、冷凝风机、贮液器等组成。 ___
A. 废排风机
B. 冷凝器
C. 电加热器
D. 蒸发器
【单选题】
压缩冷凝单元主要由 、压缩机、冷凝器、贮液器等组成。 ___
A. 废排风机
B. 电加热器
C. 冷凝风机
D. 蒸发器
【单选题】
的作用是控制各系统机构按规定的方案协调地工作,以使车内的空气参数控制在规定的范围内,并同时对空调装置起自动保护作用。 ___
A. 空气处理单元
B. 空气压力波动控制装置
C. 空调控制系统
D. 压缩冷凝单元
【单选题】
系统的组成:通风机、进排风装置、风道、空气净化设备、空气压力波动控制装置。 ___
A. 通风
B. 控制
C. 冷凝压缩
D. 辅助
【单选题】
通风系统的组成: 、进排风装置、风道、空气净化设备、空气压力波动控制装置。 ___
A. 通风机
B. 贮液器
C. 冷凝器
D. 节流装置
【单选题】
通风系统的组成: 、进排风装置、风道、空气净化设备、通风机。 ___
A. 空气压力波动控制装置
B. 贮液器
C. 冷凝器
D. 节流装置
【单选题】
通风系统的组成: 、进排风装置、风道、通风机、空气压力波动控制装置。 ___
A. 空气净化设备
B. 贮液器
C. 冷凝器
D. 节流装置
【单选题】
通风系统的组成: 、进排风装置、通风机、空气净化设备、空气压力波动控制装置。 ___
A. 风道
B. 贮液器
C. 冷凝器
D. 节流装置
【单选题】
通风系统的组成: 、通风机、风道、空气净化设备、空气压力波动控制装置。 ___
A. 进排风装置
B. 贮液器
C. 冷凝器
D. 节流装置
【单选题】
动车组通风系统的作用是:将经过处理的空气输送和分配到客室并获得合理的 ,同时还将客室内污浊的空气排出室外,使室内的空气参数满足设计的要求。 ___
A. 温度
B. 湿度
C. 气流组织
D. 压强
【单选题】
动车组通风系统的作用是:将经过处理的空气输送和分配到客室并获得合理的气流组织,同时还将客室内 排出室外,使室内的空气参数满足设计的要求。 ___
A. 湿润的空气
B. 干净的空气
C. 污浊的空气
D. 未处理的空气
【单选题】
高速动车组的 包括空气压力波动控制装置。 ___
A. 蒸发器
B. 节流装置
C. 冷凝器
D. 通风系统
【单选题】
高速动车组的通风系统包括 。 ___
A. 节流装置
B. 空气压力波动控制装置
C. 冷凝器
D. 贮液器
【单选题】
高速动车组 的功能就是保证车厢内具有适当的气压。 ___
A. 通风系统
B. 冷凝器
C. 节流装置
D. 冷凝器
【单选题】
高速动车组的通风系统的功能就是保证车厢内具有适当的 。 ___
A. 气压
B. 温度
C. 湿度
D. 压强
【单选题】
高速动车组当车外 发生明显变化时,通风系统会将车厢内的气压维持在一个让人们感到舒适的水平。 ___
A. 气压
B. 温度
C. 湿度
D. 速度
【单选题】
高速动车组当车外气压发生明显变化时,通风系统会将车厢内的 维持在一个让人们感到舒适的水平。 ___
A. 气压
B. 温度
C. 湿度
D. 速度
【单选题】
高速动车组当车外气压发生明显变化时, 会将车厢内的压力维持在一个让人们感到舒适的水平。 ___
A. 自动控制单元
B. 压缩冷凝单元
C. 通风系统
D. 辅助控制单元
【单选题】
是动车组制冷系统组成部分。 ___
A. 节流阀
B. 干燥器
C. 中继阀
D. 蒸发器
【单选题】
蒸发器是动车组 组成部分。 ___
A. 压力处理单元
B. 制冷系统
C. 供热系统
D. 空气压力波动控制装置
【单选题】
动车组制冷系统用管道连接成一 循环系统。 ___
A. 半开放
B. 开放
C. 半封闭
D. 封闭
【单选题】
动车组 从蒸发器流出的是低压制冷剂。 ___
A. 制冷系统
B. 压力处理单元
C. 供热系统
D. 空气压力波动控制装置
【单选题】
动车组制冷系统从蒸发器流出的是 制冷剂。 ___
A. 常压
B. 高压
C. 低压
D. 高温
【单选题】
动车组 中制冷剂蒸气进入冷凝器后在常温下被冷凝液化。 ___
A. 制冷系统
B. 压力处理单元
C. 供热系统
D. 空气压力波动控制装置
【单选题】
动车组制冷系统中制冷剂蒸气进入 后在常温下被冷凝液化。 ___
A. 节流装置
B. 蒸发器
C. 冷凝器
D. 压缩机
【单选题】
压缩机的作用是将从蒸发器流出的低压制冷剂蒸气压缩,使其压力提高到与冷凝温度相对应的冷凝压力,从而保证制冷剂蒸气进入 后在常温下被冷凝液化。 ___
A. 冷凝器
B. 储液器
C. 干燥器
D. 蒸发器
【单选题】
制冷剂蒸气在 内冷凝液化时,保持温度和压力不变。 ___
A. 压缩机
B. 蒸发器
C. 冷凝器
D. 节流装置
【单选题】
制冷剂蒸气在冷凝器内冷凝液化时,保持 不变。 ___
A. 湿度和压力
B. 温度和压力
C. 湿度和温度
D. 流速和压力
【单选题】
制冷剂蒸气在 内冷凝液化时,相应的温度压力称为冷凝温度和冷凝压力。 ___
A. 压缩机
B. 蒸发器
C. 冷凝器
D. 节流装置
【单选题】
和 。 ___
A. 绝对压力
B. 冷凝压力
C. 相对压力
D. 固定压力
【单选题】
成为 制冷剂的装置;常用的节流装置有手动节流阀、浮球节流阀、热力膨胀阀或毛细管等。 ___
A. 低温低压液态
B. 低温低压气态
C. 高温高压液态
D. 高温低压气态
【单选题】
节流装置的作用:是使来自冷凝器的冷凝液进一步降压降温成为低温低压 制冷剂的装置;常用的节流装置有手动节流阀、浮球节流阀、热力膨胀阀或毛细管等。 ___
A. 液态
B. 气态
C. 固态
D. 混合态
【单选题】
常用的节流装置有 、浮球节流阀、热力膨胀阀或毛细管等。 ___
A. 手动节流阀
B. 中继阀
C. 差压阀
D. 单向阀
推荐试题
【判断题】
工作台要牢固平稳,平台周围要保持整洁,通行要方便,1米内禁止堆放物件
A. 对
B. 错
【判断题】
两孔轴线相交成 90°角,一个孔直径为φ20mm,另一个孔直径是φ30mm,应该先钻穿直径大的孔
A. 对
B. 错
【判断题】
碳素工具钢和合金工具钢用于制造中、低速成型刀具
A. 对
B. 错
【判断题】
经纬仪整平时,经反复调整,直到仪器转到任意位置时,水准气泡最大偏离值小于二分之一格为止
A. 对
B. 错
【判断题】
刮削大型机床导轨面时,应在将导轨面上的零件全部拆除后进行,以保证刮削质量
A. 对
B. 错
【判断题】
要安排好培训计划,做好上课的准备工作,做到有组织,有计划地进行培训,做到定时间,定地点,定内容,定进度,定要求,有练习,有考核
A. 对
B. 错
【判断题】
轨道制作主要是轨道调直和接头,调直后对轨道进行编号,两条轨道上从端部或伸缩缝处算起,轨道接头至少要对齐,以使运转平稳
A. 对
B. 错
【判断题】
为实现电动机连续正转运行需采用具有接触器自锁的控制线路和手动正转控制回路
A. 对
B. 错
【判断题】
在修理带传动机构时,发现带轮孔超差额0.08mm,造成配合过松,一般可用镀铬法来加大轴颈尺寸
A. 对
B. 错
【判断题】
用经纬仪和平行光管测量机床转台分度误差时,应用专用心轴配装在转台中心孔中将经纬仪和心轴紧固联接在一起
A. 对
B. 错
【判断题】
采用双螺母螺纹式调整滚珠丝杠轴向间隙的方法结构紧凑,调整方便,应用广泛
A. 对
B. 错
【判断题】
若自准直仪上读数鼓轮每格角值分度值为1",则其线值分度值可用0.05mm/m表示
A. 对
B. 错
【判断题】
所有的紫色酒精,在 1 米内不准点有明火,不准放在暖气片上
A. 对
B. 错
【判断题】
固定式装配适用于单件和小批量模具的装配,以及装配精度要求较高,需要调整的部位较多的装配
A. 对
B. 错
【判断题】
我国对企业发生的事故,坚持“四不放过”原则进行处理
A. 对
B. 错
【判断题】
齿轮的齿侧间隙分为12 个等级
A. 对
B. 错
【判断题】
在机械设备中,凸轮表面误差将会引起扭转振动
A. 对
B. 错
【单选题】
What happens to the status of users already logged into ESXi Shell when a vSphere administrator enables lockdown mode?___
A. Users remain logged in and can run commands, except to disable lockdown mode.
B. Users remain logged in and can run commands, including disabling lockdown mode.
C. Users are immediately logged out of ESXi Shell.
D. Users are logged out after a timeout specified by the vSphere administrator.
【单选题】
What is the effective vSphere licensing level during the 60 day evaluation period?___
A. vSphere Foundation Essentials Plus
B. vSphere Standard
C. vSphere Enterprise
D. vSphere
E. nterprise Plus
【单选题】
To comply with security requirements, an administrator with a vCenter Server Appliance needs to force logoff of the vSphere web client after 10 minutes of inactivity.What should the administrator do to meet the requirement?___
A. Edit: /var/lib/vmware/vsphere-client/webclient.properties, modify session.timeout=10
B. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=600
C. Edit: /var/lib/vmware/vsphere-client/webclient.properties modify session.timeout=600
D. Edit: /opt/vmware/vsphere-client/webclient.properties, modify session.timeout=10
【单选题】
An administrator enables High Availability (HA) on a Virtual SAN cluster.Which network is used for HA Network Heatbeat configuration?___
A. The Management network.
B. The vMotion network.
C. The Virtual SAN network.
D. The Provisioning Traffic network.
【单选题】
A user wants to monitor a business-critical virtual machine to ensure that it doesn't run out of resources. What metric could be monitored in vRealize Operations to address this concern?___
A. Time Remaining badge
B. Compliance badge
C. Reclaimable Waste badge
D. Density badge
【单选题】
An administrator has recently installed a new ESXi 6.x Host, and during the configuration notices sporadic network problems. To check whether the issue occurred sometime during the configuration, the administrator would like to reset the system.How can this be accomplished in the shortest amount of time?___
A. Run the ESXi installer again and reinstall the host.
B. Select the Reset System Configuration option from the vSphere Client when connected directly to the host.
C. From the
D. irect Console User Interface, select Reset System Configuration.
【单选题】
A vApp is running out of compute resources when overall activity is high within the resource pool. At other times, everything is fine.What should be done to resolve this issue?___
A. Increase the size of the resource pool Shares.
B. Set the vApp's CPU and Memory Reservation Type to Expandable.
C. Set the vApp's CPU and Memory Limit to Unlimited.
D. Create a new resource pool with the existing hardware configuration.
【单选题】
A virtual machine has been renamed and an administrator is unable to find files with the new virtual machine name in the datastore.What is the reason for this?___
A. The names of the files on the datastore do not change.
B. The names of the files on the datastore have been corrupted.
C. The virtual machine needs to be re-added to the inventory.
D. The Distributed Resource Scheduler moved the virtual machine to another host.
【单选题】
An administrator has configured network connectivity for a new virtual machine, as shown in the Exhibit.What will occur with the network traffic of this virtual machine when communicating externally from vSwitch1?___
A. The virtual machine will communicate on both uplinks
B. The virtual machine will only communicate on vmnic1
C. The virtual machine will only communicate on vmnic2
D. The virtual machine will fail to communicate externally
【单选题】
An administrator is unable to create the first group in a new vRealize Operations environment. What is the likely cause of the problem?___
A. There are no group types defined.
B. The group is not defined in SSO.
C. There are more than 32 group types defined.
D. The description for the group is not provided.
【单选题】
A new vApp was built and tested in the corporate headquarters datacenter running vSphere 6.x. What condition would explain why the virtual machine is failing to boot in an offsite datacenter running on vSphere 5.5?___
A. The virtual machine was built with the default hardware version.
B. The VMFS 5 datastore is not compatible with virtual machines configured with vSphere 6.x.
C. a
D. RS 5.5 cluster cannot run virtual machines configured with vSphere 6.x.
【单选题】
An administrator is evaluating whether to deploy vCenter Server on a Windows server or on a vCenter Server appliance. The administrator has the following requirements: <A web browser will be utilized to manage the vSphere environment.> <16 ESXi hosts will be deployed.> <Licenses must be shared with a vCenter Server at another site.> <An external Oracle 10g database server will be used to host the vCenter Server database.> Why will the administrator need to deploy vCenter Server on a Windows server?___
A. Linked Mode is a requirement for the solution.
B. Oracle 10g is a requirement for the solution.
C. The vSphere web client is a requirement for the solution.
D. Management of more than 5 hosts is a requirement for the solution.
【单选题】
What is a benefit of using VMware Data Protection ?___
A. Provides support for guest-level backups and restores of Microsoft SQL Servers, Exchange Servers, and Share Point Servers.
B. Provides support for advanced storage services including replication, encryption, deduplication, and compression.
C. Provides direct access to VDP configuration integrated into the vSphere Client.
D. Reduces disk space consumed by virtual machine data using deduplication.
【单选题】
An administrator enables vSphere High Availability (HA) on an existing cluster with a large number of hosts and virtual machines. The administrator notices that the setup of vSphere HA on some of the hosts is failing. What step, if taken, might resolve this issue?___
A. Increase the value of the config.vpxd.das.electionWaitTimeSec setting.
B. Set the value of vpxd.das.aamMemoryLimit to 256.
C. Set the value of the das.useDefaultIsolationAddress setting to False.
D. Increase the value of the das.iostatsinterval setting.
【单选题】
An ESXi 6.x host consists of 24 logical cores. Hyperthreading is enabled on the host. What is the maximum number of vCPUs that can be assigned to a virtual machine on this host?___
A. 24
B. 48
C. 64
D. 128
【单选题】
By default, each ESXi 6.x host is provisioned with a certificate from which root certificate authority?___
A. RedHat Certificate Authority
B. VMware Certificate Authority
C. DigiCert Certificate Authority
D. Verisign Certificate Authority
【单选题】
An administrator is adding an NFS datastore as shown in the Exhibit. What is the purpose of the Servers to be added list?___
A. It contains the IP addresses of the NFS Storage Server to provide multipathing capability.
B. It contains the IP addresses of the ESXi hosts that mount the datastore.
C. It contains the IP addresses used for
D. ynamic Discovery of targets.
【单选题】
An administrator reports that the System Event log data is only available for 24 hours when reviewing the Hardware Status tab. Which condition could be responsible for the loss of data?___
A. A Reset event log was executed.
B. The statistical collection level was set to a value of 1.
C. The boot disk of the host is corrupt.
D. Syslog has been configured at the vCenter Server level.
【单选题】
During an upgrade, the ESXi 6.x installer finds an existing version of ESXi and a VMFS3 volume. No virtual machines exist on the host or VMFS3 volume. The requirement is to upgrade to VMFS5. Which option should be chosen to meet this requirement?___
A. Upgrade ESXi and preserve the VMFS datastore
B. Install ESXi and preserve the VMFS datastore
C. Install ESXi and overwrite the VMFS datastore
D. Upgrade
E. SXi and overwrite the VMFS datastore
【单选题】
A vSphere 6.x Standard Switch is configured with 4 virtual machine portgroups, as shown in the exhibit. Which portgroup would be utilized by default when creating a new virtual machine?___
A. Access Network
B. DMZ Network
C. VM Network
D. Virtual Machine Network
【单选题】
Which vSphere 6.x feature will allow an organization to utilize native snapshots?___
A. Virtual Volumes
B. Virtual SAN
C. VMFS3
D. VMFS5
【单选题】
An administrator is creating a new vSphere Distributed Switch that will be utilized with a specific vSphere Cluster. The cluster itself contains a mix of ESXi 5.x and 6.x Hosts. Which Distributed Switch version should be created to support this configuration?___
A. Distributed Switch: 6.0.0
B. Distributed Switch: 5.0.0
C. Distributed Switch: 5.1.0
D. Distributed Switch: 5.5.0
【单选题】
Which load balancing policy, previously limited to vSphere Distributed Switches, is now available on vSphere Standard Switches with vSphere 6.x?___
A. Route based on physical NIC workload
B. Route based on IP Hash
C. Route based on the originating virtual port
D. Route based on Source MAC Hash