【单选题】
Which command enables authentication at the oSPFv2 routing process level?___
A. ip ospf authentication message-digest
B. area 0 authentication message-digest
C. ip ospf message-digest-key 1 mds Cisco
D. area 0 authentication ipsec spi 500 md5 1234567890ABCDEF1234567890ABCDEF
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
B
解析
暂无解析
相关试题
【单选题】
Which type of firewall monitors a nd protects a specific system?___
A. firewall
B. application firewall
C. stateless firewall wvp
D. personal firewall
【单选题】
On an ASA, which maps are used to identify traffic?___
A. Route maps
B. Policy maps
C. Class maps
D. Service maps
【单选题】
Which type of social engineering attack targets top executives?___
A. whaling
B. vishin
C. spear phishing ng
D. baiting
【单选题】
What is the minimum Cisco lOS version that supports zone-based firewalls?___
A. 12.1T
B. 15.1
C. 15.0
D. 124
【单选题】
In which type of attack does an attacker overwrite an entry in the CAM table to divert traffic destined to a legitimate host?___
A. DHCP spoofing
B. ARP spoofing
C. CAM table overflow
D. MAC spoofing
【多选题】
Which two attack types can be prevented with the impleme ntation of a Cisco IPS solution?___
A. DDos
B. man-in-the-middle
C. worms
D. ARP spoofing
E. VLAN hopping
【多选题】
choose four___
A. DHCP snooping ——————————blocks DHCP messages
B. Dynamic ARP inspection——————verifies IP-to-MAC traffic on untrusted ports
C. IP sources guard ——————————provides layer 2 interface security with ports ACLs
D. Port security————————————mitigates MAC-address spoofing at the access interface
【多选题】
choose four___
A. Step1————————run the system setup wizard
B. Step2————————add an authentication realm
C. Step3————————configure identity management
D. Step4————————configure directory group
【多选题】
What are two advanced features of the Cisco AMp solution for endpoints ___
A. contemplation
B. foresight
C. sandboxing
D. reputation
E. reflection
【多选题】
Which two characteristics of RADIUS are true?___
A. It encrypts only the password between user and server.
B. It uses TCP ports 1812/1813
C. It uses UDP ports 1812/1813.
D. It uses UDP port 49
E. It uses TCP port 49
【多选题】
What are two challenges of using a network-based IPS? ___
A. It is unable to determine whether a detected attack was successful
B. It requires additional storage and proce ssor capacity on syslog servers
C. As the network expands, it requires you to add more sensors.
D. It is unable to detect attacks across the entire network
E. It must support multiple operating systems.
【多选题】
What are two default be haviors of the traffic on a zone-based firewall?___
A. Traffic within the self -zone uses an im plicit deny all.
B. All traffic between zones is implicitly blocked
C. Communication is allowed between interfadAss that are members of the same zone
D. Communication is blocked between interfaces that are members of the same zone
E. The CBAC rules that are configured on router interfaces apply to zone interfaces
【多选题】
Which two advantages does the on-premise model for MDM deployment have over the cloud-based model?___
A. The on-premise model is easier and faster to de ploy than the cloud-based model
B. The on-premise model is more scalable than the cloud-based model
C. The on-premise model is generally less expensive than the cloud-based model
D. The on-premise model generally has less latency than the cloud- based model.
E. The on-premise model provides more control of the MDM solution than the cloud
【多选题】
Which two actions can an end usts take to manage a lost or stolen device in Cisco ISE? ___
A. Activate Cisco ISE End point Protection Services to quarantine the device.
B. Add the mac address of the device to a list of blacklisted devices
C. Force the device to be locked with a PIN
D. Request revocation of the digital certificate of the device.
E. Reinstate a device that the user previously marked as lost or stolen
【多选题】
Which two problems can arise when a proxy firewall serves as the gateway between networks?___
A. It can prevent content caching
B. It can limit application support
C. It is unable to prevent direct connections to other networks
D. It can cause reduced throughput.
E. It is unable to provide antivirus protection
【多选题】
When using the Adaptive Security Device Manager(ASDM), which two methods are available to add a new root certificate?___
A. Use sCep
B. Install from SFTP server
C. Install from a file
D. Use Https
E. Use LDAP
【多选题】
Which two are considered basic security principles?___
A. Accountability
B. Redundancy
C. High Availabilit
D. Integrity
E. Confidentiality
【多选题】
Which two roles of the Cisco WSA are true?___
A. IPS
B. firewall
C. antispam
D. web proxy
E. URL filter
【单选题】
Which next-generation encryption algorithm supports four variants?___
A. SHA-2
B. SHA-1
C. MD5
D. HMAC
【单选题】
What aims to remove the abil ity to deny an action?___
A. Non-Repudiation
B. Accountability
C. Integrity
D. Deniability
【单选题】
Which statements about the native VLAN is true ?___
A. It is susceptible to VLAN hopping attacks.
B. It is the Cisco recommended VLAN for switch-management traffic
C. It is most secure when it is a ssigned to vLAn 1.
D. It is the cisco-recomme nded vlan for user traffic
【单选题】
There are two versions of IKE:IKEv1 and IKEv2. Both IKEv1 and IKEv2 protocols operate in phases IKEv1 operates in two phases. IKEv2 operates in how many phases?___
A. 2
B. 3
C. 4
D. 5
【单选题】
What does the dh group refer to?___
A. length of key for hashing C
B. length of key for encryption
C. tunnel lifetime key
D. length of key for key exchange
E. length of key for authentication
【单选题】
Which path do you follow to enable aaa through the SDM ?___
A. Configure Tasks > AAA
B. Configure > Addition Authentication > AAA
C. Configure > AAA
D. Configure > Additional Tasks > AAA
E. Configure Authentication > AAA
【单选题】
which technology cloud be used on top of an MPLS VPN to add confidentiality ?___
A. IPsec
B. 3DES
C. AES
D. SSL
【单选题】
Which term is most closely aligned with the basic purpose of a SIEM solution? ___
A. Non-Repudiation
B. Accountability
C. Causality
D. Repudiation
【单选题】
You have just deployed SNMPv3 in your environment, Your manager asks you to make sure that our SNMP agents can only talk to the SNMP Manager. What would you configure on your SNMI agents to satisfy this request?___
A. A SNMP View containing the SNMP managers
B. Routing Filter with the SNMP managers in it applied outbound
C. A standard ACL containing the SNMP managers applied to the SNMP configuration
D. A SNMP Group containing the SNMP managers
【单选题】
Which feature prevents loops by moving a nontrunking port into an errdisable state when a BPDU is received on that port?___
A. BPDU filte
B. DHCP snooping
C. BPDU guard
D. Port Fast
【单选题】
Which command enables port security to use sticky MAC addresses on a switch?___
A. switchport port-security violation restrict
B. switchport port-security mac-address sticky
C. switchport port-security violation protect
D. switchport port-security
【单选题】
When you edit an IPS subsignature, what is the effect on the parent signature and the family of subsignatures?___
A. The change applies to the parent signature and the entire family of subsignatures
B. The change applies to the parent signature and the subsignature that you edit
C. The change applies only to subsignatures that are numbered sequentially after the subsignature that you edit
D. Other signatures are unaffected, the change applies only to the subsignature that you dit
【单选题】
Which type of mechanism does Cisco FirePOWER de ploy to protect ag detected moving across other networks?___
A. antivirus scanning
B. policy-based
C. reputation-based
D. signature-based
【单选题】
What action must you take on the ise to blacklist a wired device?___
A. Locate the switch through which the device is connected and push an a cl restricting all access by the device
B. Issue a CoA request for the de vice's mac address to each access switch in the network
C. Revoke the device's certificate so it is unable to authenticate to the network
D. Add the device's MAc address to a list of black listed devices
【单选题】
Which type of firewall can perform deep packet inspection?___
A. packet-filtering firewall
B. stateless firewall
C. application firewall
D. personal firewall
【单选题】
What is the main purpose of Control Plane Policing?___
A. to prevent exhaustion of route-proce ssor resources
B. to organize the egress packet queues
C. to define traffic classes
D. to maintain the policy map
【单选题】
Which attack can be prevented by OSPF authentication?___
A. smurf attack
B. IP spoofing attack
C. denial of service attack
D. buffer overflow attack
【单选题】
What is the best definition of hairpinning?___
A. ingress traffic that traverses the outbound interface on a device
B. traffic that enters one interface on a device and that exits through another interface
C. traffic that enters and exits a device through the same interface
D. traffic that tunnels through a device interface
【单选题】
Which SNMPv3 security level provides authentication using HMAC with MD5, but does not use encryption?___
A. authPriv
B. authNo Priv
C. noAuthNoPriv
D. NoauthPriv
【单选题】
You have implemented a dynamic blacklist, using security intelligence to block illicit network activity. However, the blacklist contains several approved connections that users must access for usiness pur poses. Which action can you take to retain the blacklist while allowing users to access the approve d sites?___
A. Create a whitelist and manually add the approved addresses.
B. Disable the dynamic blacklist and deny the specif ic address on a whitelist while permitting the others
C. Edit the dynamic blacklist to remove the approved addresses
D. Disable the dynamic blacklist and create a static blacklist in its place
【单选题】
When connecting to an external resource,you must change a source IP address to use one IP address from a range of 207.165.201.1 to 207.165.1.30. Which option do you implement ?___
A. dynamic source NAT that uses an IP ad dress as a mapped source
B. static destination NAT that uses a subnet as a real de stination
C. dynamic source NAT that uses a range as a mapped source
D. static destination NAT that uses a subnet as a real source
【单选题】
Refer to the exhibit. 【nat(ins,any)dynamic interface】Which ty pe of NaT is configured on a Cisco ASA?___
A. dynamic NAT
B. source identity NAT
C. dynamic PAT
D. identity twice NAT
推荐试题
【单选题】
地铁正线采用___道床,停车场采用()道床。
A. 无砟,有砟
B. 无砟,无砟
C. 有砟,有砟
D. 有砟,无砟
【单选题】
尖轨动程规定在第___连接杆(拉杆)中心处测量
A. 1
B. 2
C. 3
D. 4
【单选题】
正线线路中钢轨上的R代表___。
A. 超高
B. 一个字母
C. 正矢点
D. 半径
【单选题】
正线线路中钢轨上的H代表___。
A. 超高
B. 一个字母
C. 正矢点
D. 半径
【单选题】
正线线路中钢轨上的F代表___。
A. 超高
B. 一个字母
C. 正矢点
D. 半径
【单选题】
菱形道岔如何判定右股___。
A. 随意
B. 面向停车场或者车站左边
C. 都可以
D. 面向停车场或者车站右边
【单选题】
使用添乘仪时,应该按___选择车型。
A. 1
B. 2
C. 3
D. 4
【单选题】
高于标准股的记___。
A. +
B. -
C. *
D. #
【单选题】
低于标准股的记___。
A. +
B. -
C. *
D. #
【单选题】
正线的轨距变化率不大于___。
A. 1/1000
B. 1/500
C. 1/250
D. 1/200
【单选题】
其他线路的轨距变化率不大于___。
A. 2/1000
B. 1/300
C. 1/250
D. 1/200
【单选题】
全面捣鼓时,尖轨尖端及前后各___根枕轨枕,适当增加捣鼓力。
A. 2
B. 3
C. 4
D. 6
【单选题】
正线起道时,要求水平不超限,正线的误差不超过___mm.
A. 1
B. 2
C. 4
D. 5
【单选题】
停车场起道时,要求水平不超限,误差不超过___mm。
A. 1
B. 3
C. 5
D. 6
【单选题】
正线道岔起道后,要用___M弦线检查高低。
A. 5
B. 10
C. 15
D. 20
【单选题】
停车场道岔起道后,要用___M弦线检查高低。
A. 5
B. 10
C. 15
D. 20
【单选题】
线整改道岔前,一定要与___进行联系。
A. 工程师
B. OCC
C. DCC
D. 不用
【单选题】
车辆段整改道岔前,一定要与___进行联系。
A. 工程师
B. OCC
C. DCC
D. 不用
【单选题】
车辆段道岔中的尖轨开口标准值为___。
A. 150
B. 152
C. 155
D. 160
【单选题】
位于弦___的点的矢距叫做正矢
A. 起始处
B. 1/4处
C. 1/2处
D. 终点处
【单选题】
弦长___的矢距称为外矢距。
A. 起始处
B. 1/4处
C. 1/2处
D. 终点处
【单选题】
测量现场正矢时如果曲线方向很差,应先粗拨___,但应在新拨动部分经
A. 一次
B. 两次
C. 三次
D. 四次
【单选题】
为平衡离心力的作用,在曲线轨道上设置___超高。
A. 外轨
B. 内轨
C. 内外轨
D. 过
【单选题】
超高与地铁列车速度的平方成___。
A. 正比
B. 反比
C. 不成比例
D. 倒数
【单选题】
高低是指钢轨顶面沿钢轨方向的___凹凸不平顺。
A. 横向
B. 侧向
C. 竖向
D. 垂直
【单选题】
轨向是指钢轨头部内侧面沿钢轨方向的___凹凸不平顺。
A. 横向
B. 竖向
C. 垂直
D. 侧向
【单选题】
车站站台段线路一般设在直线上,困难条件下可设在半径不小于___的曲线上。
A. 600m
B. 700m
C. 800m
D. 900m
【单选题】
破底清筛后,枕下清碎厚度不少于___。
A. 250mm
B. 300mm
C. 350mm
D. 400mm
【单选题】
清筛时,枕心处低于枕底___,枕头处低于枕底150mm,枕头土垅应筛至路基面。
A. 250mm
B. 200mm
C. 150mm
D. 100mm
【单选题】
清筛时,枕心处低于枕底100mm,枕头处低于枕底___,枕头土垅应筛至路基面。
A. 100mm
B. 150mm
C. 200mm
D. 250mm
【单选题】
车站站台计算长度内和道岔范围内___竖曲线。
A. 不得设置
B. 可设置一条
C. 可设置两条
D. 可设置三条
【单选题】
竖曲线离开道岔端部的距离不应小于___。
A. 2m
B. 3m
C. 4m
D. 5m
【单选题】
凡相邻坡段的坡度代数差大于___时,须设置竖曲线。
A. 1‰
B. 2‰
C. 3‰
D. 4‰
【单选题】
每20m竖曲线长度的变坡率,凸形应不大于___。
A. 1‰
B. 2‰
C. 3‰
D. 4‰
【单选题】
每20m竖曲线长度的变坡率,凹形应不大于___。
A. 0.5‰
B. 1‰
C. 1.5‰
D. 2‰
【单选题】
竖曲线半径应根据运营条件采用2000-10000m;困难条件下不小于___m。
A. 4000
B. 5000
C. 6000
D. 7000
【单选题】
线路设备状态评定时,是以___为单位。
A. m
B. cm
C. mm
D. km
【单选题】
每段无缝线路应设位移观测桩不少于___对
A. 3对
B. 4对
C. 5对
D. 6对
【单选题】
观察列车从第一个公里标到第二个公里标所用时间为1min,则行车速度是___km/h。
A. 50
B. 60
C. 70
D. 80
【单选题】
曲线某点的拨道量为6mm,其前后两点正矢的影响量为___。
A. 前后两点和为6mm
B. 前后两点各为-6mm
C. 前后两点和为3mm
D. 前后两点各为-3mm