【单选题】
What action must you take on the ise to blacklist a wired device?___
A. Locate the switch through which the device is connected and push an a cl restricting all access by the device
B. Issue a CoA request for the de vice's mac address to each access switch in the network
C. Revoke the device's certificate so it is unable to authenticate to the network
D. Add the device's MAc address to a list of black listed devices
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
D
解析
暂无解析
相关试题
【单选题】
Which type of firewall can perform deep packet inspection?___
A. packet-filtering firewall
B. stateless firewall
C. application firewall
D. personal firewall
【单选题】
What is the main purpose of Control Plane Policing?___
A. to prevent exhaustion of route-proce ssor resources
B. to organize the egress packet queues
C. to define traffic classes
D. to maintain the policy map
【单选题】
Which attack can be prevented by OSPF authentication?___
A. smurf attack
B. IP spoofing attack
C. denial of service attack
D. buffer overflow attack
【单选题】
What is the best definition of hairpinning?___
A. ingress traffic that traverses the outbound interface on a device
B. traffic that enters one interface on a device and that exits through another interface
C. traffic that enters and exits a device through the same interface
D. traffic that tunnels through a device interface
【单选题】
Which SNMPv3 security level provides authentication using HMAC with MD5, but does not use encryption?___
A. authPriv
B. authNo Priv
C. noAuthNoPriv
D. NoauthPriv
【单选题】
You have implemented a dynamic blacklist, using security intelligence to block illicit network activity. However, the blacklist contains several approved connections that users must access for usiness pur poses. Which action can you take to retain the blacklist while allowing users to access the approve d sites?___
A. Create a whitelist and manually add the approved addresses.
B. Disable the dynamic blacklist and deny the specif ic address on a whitelist while permitting the others
C. Edit the dynamic blacklist to remove the approved addresses
D. Disable the dynamic blacklist and create a static blacklist in its place
【单选题】
When connecting to an external resource,you must change a source IP address to use one IP address from a range of 207.165.201.1 to 207.165.1.30. Which option do you implement ?___
A. dynamic source NAT that uses an IP ad dress as a mapped source
B. static destination NAT that uses a subnet as a real de stination
C. dynamic source NAT that uses a range as a mapped source
D. static destination NAT that uses a subnet as a real source
【单选题】
Refer to the exhibit. 【nat(ins,any)dynamic interface】Which ty pe of NaT is configured on a Cisco ASA?___
A. dynamic NAT
B. source identity NAT
C. dynamic PAT
D. identity twice NAT
【单选题】
Which mitigation technology for web-based threats prevents the removal of confidential data from the network?___
A. CTA
B. DCA
C. AMP
D. DLP
【单选题】
Refer to the exhibit. What is the effect of the given configuration?___
A. It establishes the preshared key for the switch
B. It establishes the preshared key for the firewall.
C. It establishes the preshared key for the Cisco ISE appliance
D. It establishes the preshared key for the router.
【多选题】
What are two major considerations when choosing between a SPAN and a TAP when plementing IPS?___
A. the type of analysis the iS will perform
B. the amount of bandwidth available
C. whether RX and TX signals will use separate ports
D. the way in which media errors will be handled
E. the way in which dropped packets will be handled
【多选题】
What are two direct-to-tower methods for redirecting web traffic to Cisco Cloud Web Security?___
A. third-party proxies
B. Cisco Catalyst platforms
C. Cisco NAC Agent
D. hosted PAC files
E. CiSco ISE
【多选题】
Which three descriptions of RADIUS are true? ___
A. It uses TCP as its transport protocol.
B. Only the password is encrypted
C. It supports multiple transport protocols
D. It uses UDP as its transport protocol
E. It combines authentication and authorization
F. It separates authentication,authorization,and accounting
【多选题】
Which two configurations can prevent VLAN hopping attack from attackers at VLAN 10?___
A. using switchport trunk native vlan 10 command on trunk ports
B. enabling BPDU guard on all access ports
C. creating VLAN 99 and using switchport trunk native vlan 99 command on trunk ports
D. applying ACl between VLAN
E. using switchport mode access command on all host ports
F. using switchport nonegotiate command on dynamic desirable ports
【多选题】
What are two features of transparent firewall mode ___
A. It conceals the presence of the firewall from attackers
B. It allows some traffic that is blocked in routed mode
C. It enables the aSA to perform as a router.
D. It acts as a routed hop in the network.
E. It is configured by default
【多选题】
Which two models of A sa tend to be used in a data center?___
A. 5555X
B. 5585X
C. ASA service module
D. 5512X
E. 5540
F. 5520
【多选题】
Which two statements about hardware-based encrption are true?___
A. It is widely accessible
B. It is potentially easier to compromise than software-based encryption. It requires minimal configuration
C. It requires minimal configuration
D. It can be implemented without impacting performance
E. It is highly cost-effective
【多选题】
In which two modes can the Cisco We b Security appliance be de ployed?___
A. as a transparent proxy using the Secure Sockets Layer protocol
B. as a transparent proxy using the Web Cache Communication Protocol
C. explicit proxy mode
D. as a transparent proxy using the Hyper Text Transfer Protocol
E. explicit active mode
【单选题】
1.三相刀开关的图形符号与交流接触器的主触点符号是___。
A. 一样的
B. 可以互换
C. 有区别的
D. 没有区别
【单选题】
2.刀开关的文字符号是___。
A. QS
B. SQ
C. SA
D. KM
【单选题】
3.行程开关的文字符号是___。
A. QS
B. SQ
C. SA
D. KM
【单选题】
4.交流接触器的文字符号是___。
A. QS
B. SQ
C. SA
D. KM
【单选题】
5.熔断器的作用是___。
A. 短路保护
B. 过载保护
C. 失压保护
D. 零压保护
【单选题】
6.热继电器的作用是___。
A. 短路保护
B. 过载保护
C. 失压保护
D. 零压保护
【单选题】
7.交流接触器的作用是可以___接通和断开负载。
A. 频繁地
B. 偶尔
C. 手动
D. 不需
【单选题】
8.三相异步电动机的启停控制线路由电源开关、熔断器、___、热继电器、按钮等组成。
A. 时间继电器
B. 速度继电器
C. 交流接触器
D. 漏电保护器
【单选题】
9.三相异步电动机的启停控制线路中需要有___、过载保护和失压保护功能。
A. 短路保护
B. 超速保护
C. 失磁保护
D. 零速保护
【单选题】
10维修电工以___、安装接线图和平面布置图最为重要。
A. 电气原理图
B. 电气设备图
C. 电气安装图
D. 电气组装图
【单选题】
11.熔断器的额定电压应___线路的工作电压。
A. 远大于
B. 不等于
C. 小于等于
D. 大于等于
【单选题】
12.对于电阻性负载,熔断器熔体的额定电流___线路的工作电流。
A. 远大于
B. 不等于
C. 等于或略大于
D. 等于或略小于
【单选题】
13.对于电动机负载,熔断器熔体的额定电流应选电动机额定电流的___倍。
A. 1~1.5
B. 1.5-2.5
C. 2.0~3.0
D. 2.5~3.5
【单选题】
14.使用快速熔断器时,一般按___来选择。
A. IN=1.03IF
B. IN=1.57IF
C. IN=2.57IF
D. IN=3IF
【单选题】
15.断路器中过电流脱扣器的额定电流应该大于等于线路的___。
A. 最大允许电流
B. 最大过载电流
C. 最大负载电流
D. 最大短路电流
【单选题】
16.短路电流很大的电气线路中宜选用___断路器。
A. 塑壳式
B. 限流型
C. 框架式
D. 直流快速
【单选题】
17.一般电气控制系统中宜选用___断路器。
A. 塑壳式
B. 限流型
C. 框架式
D. 直流快速
【单选题】
18.交流接触器一般用于控制___的负载。
A. 弱电
B. 无线电
C. 直流电
D. 交流电
【单选题】
19.直流接触器一般用于控制___的负载。
A. 弱电
B. 无线电
C. 直流电
D. 交流电
【单选题】
20.接触器的额定电压应不小于主电路的___。
A. 短路电压
B. 工作电压
C. 最大电压
D. 峰值电压
【单选题】
21.接触器的额定电流应不小于被控电路的___。
A. 额定电流
B. 负载电流
C. 最大电流
D. 峰值电流
【单选题】
22.对于___工作制的异步电动机,热继电器不能实现可靠的过载保护。
A. 轻载
B. 半载
C. 重复短时
D. 连续
推荐试题
【单选题】
抗日民族统一战线正式建立的标志是___
A. 中共发表《八一宣言》
B. 西安事变的和平解决
C. 红军改编为八路军和新四军
D. 国民党通讯社发布《国共合作宣言》和蒋介石承认共产党的合法地位谈话
【单选题】
下列关于抗战胜利的意义评述不恰当的是___
A. 是中国近百年来第一次取得反对外来侵略的完全胜利
B. 为世界反法西斯战争作出了贡献
C. 提高了中国的国际地位
D. 结束了半殖民地的历史
【单选题】
全民族抗日战争开始后,中国军队取得的第一次重大胜利是___
A. 台儿庄战役
B. 平型关战役
C. 淞沪会战
D. 百团大战
【单选题】
毛泽东认为:游击战争在抗日战争中具有___地位。
A. 重要
B. 战术
C. 战略
D. 次要
【单选题】
一二八事变爆发后,抵抗进攻上海的日军的中国国军是___
A. 二十九军
B. 十九路军
C. 东北军
D. 十七路军
【单选题】
中国人民抗日战争进入相持阶段后,国民党蒋介石掀起了三次反共高潮。其中,最为险恶、影响最大、反共面目暴露得最彻底的一次事件发生在___
A. 1939年底
B. 1940年秋
C. 1941年初
D. 1943年夏
【单选题】
十年内战的局面结束的标志是___
A. 卢沟桥事变
B. 西安事变
C. 长征胜利
D. 三大主力会师陕北
【单选题】
1932年,在日军扶持下拼凑的___成立,这时日本军国主义和中国封建残余势力结合诞生的一个怪胎。
A. 伪“中华民国国民政府”
B. 伪东北自治政府
C. 伪华北自治政府
D. 伪“满洲国”
【单选题】
将以毛泽东为主要代表的中国共产党人把马克思列宁主义的基本原理同中国革命的具体实际相结合所创造的理论成果,正式命名为毛泽东思想的会议是___
A. 中共六届六中全会
B. 中共六届七中全会
C. 中共七大
D. 中共七届二中全会
【单选题】
《中国人民政治协商会议共同纲领》最基本、最核心的内容是关于新中国的___。
A. 基本民族政策的规定
B. 国体和政体的规定
C. 经济工作方针的规定
D. 外交工作原则的规定
【单选题】
1947年7月,中共中央作出将主力打到外线去,将战争引向___区域。
A. 共产党区域
B. 国民党区域
C. 华北区域
D. 东北区域
【单选题】
1947年初,我国最早的少数民族自治区建立,它是___。
A. 新疆维吾尔族自治区
B. 广西壮族自治区
C. 内蒙古自治区
D. 宁夏回族自治区
【单选题】
揭开人民解放军战略反攻序幕的是___
A. 孟良崮战役
B. 刘邓大军挺进大别山
C. 三大战役
D. 渡江战役
【单选题】
1945年8月,中共中央在《对目前时局的宣言》中提出的口号是___。
A. 和平、民主、团结
B. 打倒蒋介石,解放全中国
C. 向北发展,向南防御
D. 将革命进行到底
【单选题】
1946年6月26日,国民党军队向___发起进攻,全面内战爆发。
A. 中原解放区
B. 华北解放区
C. 华中解放区
D. 东北解放区
【单选题】
1945年8月,___不顾个人安危偕周恩来、王若飞赴重庆与国民党进行谈判。
A. 刘少奇
B. 毛泽东
C. 朱德
D. 邓小平
【单选题】
中共七届二中全会需要解决的重要问题是___。
A. 如何夺取全国革命胜利
B. 如何解决民主革命遗留的任务的问题
C. 党的工作重心转移问题
D. 民主革命向社会主义革命转变的问题
【单选题】
1948年秋,中国人民解放军进行战略决战的第一个战役是___。
A. 辽沈战役
B. 淮海战役
C. 平津战役
D. 渡江战役
【单选题】
1947年5月,南京、北平等地爆发了反饥饿反内战运动称___运动。
A. 一二三0运动
B. 一二一运动
C. 五四运动
D. 五二0运动
【单选题】
1949年3月,中国共产党在西柏坡召开的重要会议是___。
A. 中共“六大”
B. 中共六届六中全会
C. 中共七大
D. 中共七届二中全会
【单选题】
1949年蒋介石发表“求和”声明,其真实意图是___。
A. 结束内战
B. 希望国共两党关系恢复到政协协议的框架下
C. 与中共和谈,划江而治
D. 争取时间,卷土重来
【单选题】
1947年10月,中国人民解放军总部提出的口号是___。
A. 避免内战,和平建国
B. 建立民主联合政府
C. 将主力打到外线去
D. 打到蒋介石,解放全中国
【单选题】
在全面内战爆发后的一年时间里,人民解放军处于战略___阶段。
A. 进攻阶段
B. 防御阶段
C. 相持阶段
D. 反攻阶段
【单选题】
台湾人民在1947年举行的反对国民党暴虐统治的大规模斗争是___。
A. 黑旗军起义
B. 抗暴行运动
C. 二二八起义
D. 五二○运动
【单选题】
1945年8月至10月,国共双方举行了商讨和平建国的谈判称___。
A. 重庆谈判
B. 西安谈判
C. 南京谈判
D. 北平谈判
【单选题】
1945年12月,昆明学生发动了以“反对内战,争取自由”为主要口号的___运动。
A. 抗暴运动
B. 一二一运动
C. 一二九运动
D. 五二0运动
【单选题】
中国共产党领导的爱国统一战线的重要组成部分是___。
A. 官僚、地主阶级
B. 各民主党派
C. 农民阶级
D. 工人阶级
【单选题】
抗战胜利后,各民主党派宣扬的第三条道路是___。
A. 武装斗争道路
B. 土地革命道路
C. 和平改良道路
D. 独裁道路
【单选题】
1946年8月,___指出“一切反动派都是纸老虎”的著名论断。
A. 邓小平
B. 刘少奇
C. 毛泽东
D. 周恩来
【单选题】
1946年12月,为抗议驻华美军暴行,北平学生发起了___运动。
A. 抗暴运动
B. 二二八起义
C. 一二九运动
D. 五二0运动
【单选题】
1948年4月,毛泽东完整地提出新民主主义革命总路线的著作是___。
A. 《新民主主义论》
B. 《目前形势和我们的任务》
C. 《在晋绥干部会议上的讲话》
D. 《将革命进行到底》
【单选题】
毛泽东为新华社写的1949年新年献词是___。
A. 《对目前时局的宣言》
B. 《目前形势和我们的任务》
C. 《将革命进行到底》
D. 《论人民民主专政》
【单选题】
中国人民解放军在1949年4月21日发起的重大战役是___。
A. 辽沈战役
B. 淮海战役
C. 平津战役
D. 渡江战役
【单选题】
1946年1月10日,政治协商会议在___召开。
A. 北平
B. 南京
C. 延安
D. 重庆
【单选题】
第二次世界大战结束后,在冷战的格局下,美国采取的对华政策是___。
A. 保持中立
B. 扶蒋反共
C. 武力干涉
D. 遏制中国
【单选题】
国民党当局对民主党派充满敌意,1946年___相继被暗杀。
A. 李公朴、闻一多
B. 张澜、黄炎培
C. 邓演达、李济深
D. 谭平山、章伯钧
【单选题】
在1949年9月制定的、确立中国共产党在全国执政地位的法律文献是___。
A. 《和平建国纲领》
B. 《共同纲领》
C. 《中央人民政府组织法》
D. 《中华人民共和国宪法》
【单选题】
抗日战争胜利后,中国社会的主要矛盾是___。
A. 中美民族矛盾
B. 中日民族矛盾
C. 无产阶级同资产阶级的矛盾年
D. 中国人民同美帝国支持下的国民党之间的矛盾
【单选题】
1949年,率领北平国民党军队接受中国共产党和平改编的国民党将领是___。
A. 张治中
B. 蔡廷锴
C. 杜聿明
D. 傅作义
【单选题】
1946年5月4日,中共中央发出___决定将抗战时期实行的减租减息政策改变为“耕者有其田”的政策。
A. 《关于经济问题的指示》
B. 《中国土地法大纲》
C. 《关于发展农业生产的决议》
D. 《五四指示》