【单选题】
You have just deployed SNMPv3 in your environment， Your manager asks you to make sure that our SNMP agents can only talk to the SNMP Manager. What would you configure on your SNMI agents to satisfy this request？___
A. A SNMP View containing the SNMP managers
B. Routing Filter with the SNMP managers in it applied outbound
C. A standard ACL containing the SNMP managers applied to the SNMP configuration
D. A SNMP Group containing the SNMP managers
查看试卷，进入试卷练习
微信扫一扫，开始刷题
答案
D
解析
暂无解析
相关试题
【单选题】
Which feature prevents loops by moving a nontrunking port into an errdisable state when a BPDU is received on that port？___
A. BPDU filte
B. DHCP snooping
C. BPDU guard
D. Port Fast
【单选题】
Which command enables port security to use sticky MAC addresses on a switch？___
A. switchport port-security violation restrict
B. switchport port-security mac-address sticky
C. switchport port-security violation protect
D. switchport port-security
【单选题】
When you edit an IPS subsignature， what is the effect on the parent signature and the family of subsignatures？___
A. The change applies to the parent signature and the entire family of subsignatures
B. The change applies to the parent signature and the subsignature that you edit
C. The change applies only to subsignatures that are numbered sequentially after the subsignature that you edit
D. Other signatures are unaffected， the change applies only to the subsignature that you dit
【单选题】
Which type of mechanism does Cisco FirePOWER de ploy to protect ag detected moving across other networks？___
A. antivirus scanning
B. policy-based
C. reputation-based
D. signature-based
【单选题】
What action must you take on the ise to blacklist a wired device？___
A. Locate the switch through which the device is connected and push an a cl restricting all access by the device
B. Issue a CoA request for the de vice's mac address to each access switch in the network
C. Revoke the device's certificate so it is unable to authenticate to the network
D. Add the device's MAc address to a list of black listed devices
【单选题】
Which type of firewall can perform deep packet inspection？___
A. packet-filtering firewall
B. stateless firewall
C. application firewall
D. personal firewall
【单选题】
What is the main purpose of Control Plane Policing？___
A. to prevent exhaustion of route-proce ssor resources
B. to organize the egress packet queues
C. to define traffic classes
D. to maintain the policy map
【单选题】
Which attack can be prevented by OSPF authentication？___
A. smurf attack
B. IP spoofing attack
C. denial of service attack
D. buffer overflow attack
【单选题】
What is the best definition of hairpinning？___
A. ingress traffic that traverses the outbound interface on a device
B. traffic that enters one interface on a device and that exits through another interface
C. traffic that enters and exits a device through the same interface
D. traffic that tunnels through a device interface
【单选题】
Which SNMPv3 security level provides authentication using HMAC with MD5， but does not use encryption？___
A. authPriv
B. authNo Priv
C. noAuthNoPriv
D. NoauthPriv
【单选题】
You have implemented a dynamic blacklist， using security intelligence to block illicit network activity. However， the blacklist contains several approved connections that users must access for usiness pur poses. Which action can you take to retain the blacklist while allowing users to access the approve d sites？___
A. Create a whitelist and manually add the approved addresses.
B. Disable the dynamic blacklist and deny the specif ic address on a whitelist while permitting the others
C. Edit the dynamic blacklist to remove the approved addresses
D. Disable the dynamic blacklist and create a static blacklist in its place
【单选题】
When connecting to an external resource,you must change a source IP address to use one IP address from a range of 207.165.201.1 to 207.165.1.30. Which option do you implement ?___
A. dynamic source NAT that uses an IP ad dress as a mapped source
B. static destination NAT that uses a subnet as a real de stination
C. dynamic source NAT that uses a range as a mapped source
D. static destination NAT that uses a subnet as a real source
【单选题】
Refer to the exhibit. 【nat（ins，any）dynamic interface】Which ty pe of NaT is configured on a Cisco ASA？___
A. dynamic NAT
B. source identity NAT
C. dynamic PAT
D. identity twice NAT
【单选题】
Which mitigation technology for web-based threats prevents the removal of confidential data from the network？___
A. CTA
B. DCA
C. AMP
D. DLP
【单选题】
Refer to the exhibit. What is the effect of the given configuration？___
A. It establishes the preshared key for the switch
B. It establishes the preshared key for the firewall.
C. It establishes the preshared key for the Cisco ISE appliance
D. It establishes the preshared key for the router.
【多选题】
What are two major considerations when choosing between a SPAN and a TAP when plementing IPS？___
A. the type of analysis the iS will perform
B. the amount of bandwidth available
C. whether RX and TX signals will use separate ports
D. the way in which media errors will be handled
E. the way in which dropped packets will be handled
【多选题】
What are two direct-to-tower methods for redirecting web traffic to Cisco Cloud Web Security？___
A. third-party proxies
B. Cisco Catalyst platforms
C. Cisco NAC Agent
D. hosted PAC files
E. CiSco ISE
【多选题】
Which three descriptions of RADIUS are true？ ___
A. It uses TCP as its transport protocol.
B. Only the password is encrypted
C. It supports multiple transport protocols
D. It uses UDP as its transport protocol
E. It combines authentication and authorization
F. It separates authentication，authorization，and accounting
【多选题】
Which two configurations can prevent VLAN hopping attack from attackers at VLAN 10？___
A. using switchport trunk native vlan 10 command on trunk ports
B. enabling BPDU guard on all access ports
C. creating VLAN 99 and using switchport trunk native vlan 99 command on trunk ports
D. applying ACl between VLAN
E. using switchport mode access command on all host ports
F. using switchport nonegotiate command on dynamic desirable ports
【多选题】
What are two features of transparent firewall mode ___
A. It conceals the presence of the firewall from attackers
B. It allows some traffic that is blocked in routed mode
C. It enables the aSA to perform as a router.
D. It acts as a routed hop in the network.
E. It is configured by default
【多选题】
Which two models of A sa tend to be used in a data center？___
A. 5555X
B. 5585X
C. ASA service module
D. 5512X
E. 5540
F. 5520
【多选题】
Which two statements about hardware-based encrption are true？___
A. It is widely accessible
B. It is potentially easier to compromise than software-based encryption. It requires minimal configuration
C. It requires minimal configuration
D. It can be implemented without impacting performance
E. It is highly cost-effective
【多选题】
In which two modes can the Cisco We b Security appliance be de ployed？___
A. as a transparent proxy using the Secure Sockets Layer protocol
B. as a transparent proxy using the Web Cache Communication Protocol
C. explicit proxy mode
D. as a transparent proxy using the Hyper Text Transfer Protocol
E. explicit active mode
推荐试题
【单选题】
什么是通过对受害者心里弱点、本能反应、好奇心、信任、贪婪等心理陷阱进行诸如欺骗、伤害的一种危害手段。___
A. 社会工程学
B. 社会心理学
C. 心理学
D. 社会信息学
【单选题】
信息安全渗透测试的流程___
A. 客户授权、信息搜集与分析、制定方案、渗透测试
B. 信息搜集与分析、制定方案、客户授权、渗透测试
C. 制定方案、客户授权、信息搜集与分析、渗透测试
D. 客户授权、制定方案、信息搜集与分析、渗透测试
【单选题】
信息技术安全性评估通用准则的哪个编号已被颁布为国家标准GB/T18336？___
A. ISO13335
B. ISO15408
C. ISO27002
D. ISO19968
【单选题】
国家秘密事项与国家安全和利益的关联程序，以及泄露后可能造成的损害程度为标准分为。___
A. 绝密、机密、秘密三级
B. 秘密、机密、绝密、保密四级
C. 绝密、机密两级
D. 机密、秘密、保密三级
【单选题】
按照《信息系统安全等级保护定级指南》（GB/T22240-2008）已确定安全保护等级的信息系统，定级系统的第二级是___
A. 自主保护级
B. 监督保护级
C. 指导保护级
D. 强制保护级
【单选题】
信息安全等级保护标准体系的标准体系包括___
A. GB/T28455-2012
B. GB/T22080-2008
C. GB/T 25069-2010
D. GB/T18336
【单选题】
什么是信息安全管理体系和基本要求。___
A. ISO/IEC 27000-ISO/IEC 27005
B. ISO/IEC 15408
C. ISO/IEC 13335
D. ISO/IEC 17799
【单选题】
建信息系统等级保护实施流程正确的是___
A. 建设-定级 -测评-结果分析-结果确认-定期检查
B. 定级-测评-建设-结果分析-结果确认-定期检查
C. 定级-建设-测评-结果分析-结果确认-定期检查
D. 测评-建设-定级-结果分析-结果确认-定期检查
【单选题】
劳动者通过诚实的劳动，___。
A. 仅仅是为了改善自己的生活
B. 仅仅是为了增进社会共同利益而劳动
C. 在改善自己生活的同时，也是为建设国家而劳动
D. 仅仅是为建设国家而劳动
【单选题】
将亚共析钢加热到A3以上30~70℃，在此温度下保持一定时间，然后快速冷却，使奥氏体来不及分解、合金元素来不及扩散而形成马氏组织，称为___。
A. 回火
B. 正火
C. 退火
D. 淬火
【单选题】
将钢加热到A3以上或A1左右一定温度，保温后缓慢（一般随炉冷却）而均匀冷却的热处理方法称为退火，它可以___。
A. 提高钢的硬度，提高塑性
B. 降低钢的硬度，提高塑性
C. 提高钢的硬度、降低塑性
D. 降低钢的硬度，降低塑性
【单选题】
根据GB/T221—2000规定，合金结构钢中，合金元素质量分数的平均值为___时，在合金元素符号后应写成2。
A. 1.5%~2.49%
B. 1.5%~2.00%
C. 2.00%~2.49%
D. 2.49%~3.00%
【单选题】
施焊前,焊工应对设备进行安全检差,但___不是施焊前设备安全检查的内容.
A. 机壳保护接地或接零是否可靠
B. 电焊机一次电源线的绝缘是否完好
C. 焊接电缆的绝缘是否完好
D. 电焊机内部灰尘多不多
