【单选题】
In which type of attack does an attacker overwrite an entry in the CAM table to divert traffic destined to a legitimate host?___
A. DHCP spoofing
B. ARP spoofing
C. CAM table overflow
D. MAC spoofing
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
D
解析
暂无解析
相关试题
【多选题】
Which two attack types can be prevented with the impleme ntation of a Cisco IPS solution?___
A. DDos
B. man-in-the-middle
C. worms
D. ARP spoofing
E. VLAN hopping
【多选题】
choose four___
A. DHCP snooping ——————————blocks DHCP messages
B. Dynamic ARP inspection——————verifies IP-to-MAC traffic on untrusted ports
C. IP sources guard ——————————provides layer 2 interface security with ports ACLs
D. Port security————————————mitigates MAC-address spoofing at the access interface
【多选题】
choose four___
A. Step1————————run the system setup wizard
B. Step2————————add an authentication realm
C. Step3————————configure identity management
D. Step4————————configure directory group
【多选题】
What are two advanced features of the Cisco AMp solution for endpoints ___
A. contemplation
B. foresight
C. sandboxing
D. reputation
E. reflection
【多选题】
Which two characteristics of RADIUS are true?___
A. It encrypts only the password between user and server.
B. It uses TCP ports 1812/1813
C. It uses UDP ports 1812/1813.
D. It uses UDP port 49
E. It uses TCP port 49
【多选题】
What are two challenges of using a network-based IPS? ___
A. It is unable to determine whether a detected attack was successful
B. It requires additional storage and proce ssor capacity on syslog servers
C. As the network expands, it requires you to add more sensors.
D. It is unable to detect attacks across the entire network
E. It must support multiple operating systems.
【多选题】
What are two default be haviors of the traffic on a zone-based firewall?___
A. Traffic within the self -zone uses an im plicit deny all.
B. All traffic between zones is implicitly blocked
C. Communication is allowed between interfadAss that are members of the same zone
D. Communication is blocked between interfaces that are members of the same zone
E. The CBAC rules that are configured on router interfaces apply to zone interfaces
【多选题】
Which two advantages does the on-premise model for MDM deployment have over the cloud-based model?___
A. The on-premise model is easier and faster to de ploy than the cloud-based model
B. The on-premise model is more scalable than the cloud-based model
C. The on-premise model is generally less expensive than the cloud-based model
D. The on-premise model generally has less latency than the cloud- based model.
E. The on-premise model provides more control of the MDM solution than the cloud
【多选题】
Which two actions can an end usts take to manage a lost or stolen device in Cisco ISE? ___
A. Activate Cisco ISE End point Protection Services to quarantine the device.
B. Add the mac address of the device to a list of blacklisted devices
C. Force the device to be locked with a PIN
D. Request revocation of the digital certificate of the device.
E. Reinstate a device that the user previously marked as lost or stolen
【多选题】
Which two problems can arise when a proxy firewall serves as the gateway between networks?___
A. It can prevent content caching
B. It can limit application support
C. It is unable to prevent direct connections to other networks
D. It can cause reduced throughput.
E. It is unable to provide antivirus protection
【多选题】
When using the Adaptive Security Device Manager(ASDM), which two methods are available to add a new root certificate?___
A. Use sCep
B. Install from SFTP server
C. Install from a file
D. Use Https
E. Use LDAP
【多选题】
Which two are considered basic security principles?___
A. Accountability
B. Redundancy
C. High Availabilit
D. Integrity
E. Confidentiality
【多选题】
Which two roles of the Cisco WSA are true?___
A. IPS
B. firewall
C. antispam
D. web proxy
E. URL filter
【单选题】
Which next-generation encryption algorithm supports four variants?___
A. SHA-2
B. SHA-1
C. MD5
D. HMAC
【单选题】
What aims to remove the abil ity to deny an action?___
A. Non-Repudiation
B. Accountability
C. Integrity
D. Deniability
【单选题】
Which statements about the native VLAN is true ?___
A. It is susceptible to VLAN hopping attacks.
B. It is the Cisco recommended VLAN for switch-management traffic
C. It is most secure when it is a ssigned to vLAn 1.
D. It is the cisco-recomme nded vlan for user traffic
【单选题】
There are two versions of IKE:IKEv1 and IKEv2. Both IKEv1 and IKEv2 protocols operate in phases IKEv1 operates in two phases. IKEv2 operates in how many phases?___
A. 2
B. 3
C. 4
D. 5
【单选题】
What does the dh group refer to?___
A. length of key for hashing C
B. length of key for encryption
C. tunnel lifetime key
D. length of key for key exchange
E. length of key for authentication
【单选题】
Which path do you follow to enable aaa through the SDM ?___
A. Configure Tasks > AAA
B. Configure > Addition Authentication > AAA
C. Configure > AAA
D. Configure > Additional Tasks > AAA
E. Configure Authentication > AAA
【单选题】
which technology cloud be used on top of an MPLS VPN to add confidentiality ?___
A. IPsec
B. 3DES
C. AES
D. SSL
【单选题】
Which term is most closely aligned with the basic purpose of a SIEM solution? ___
A. Non-Repudiation
B. Accountability
C. Causality
D. Repudiation
【单选题】
You have just deployed SNMPv3 in your environment, Your manager asks you to make sure that our SNMP agents can only talk to the SNMP Manager. What would you configure on your SNMI agents to satisfy this request?___
A. A SNMP View containing the SNMP managers
B. Routing Filter with the SNMP managers in it applied outbound
C. A standard ACL containing the SNMP managers applied to the SNMP configuration
D. A SNMP Group containing the SNMP managers
【单选题】
Which feature prevents loops by moving a nontrunking port into an errdisable state when a BPDU is received on that port?___
A. BPDU filte
B. DHCP snooping
C. BPDU guard
D. Port Fast
【单选题】
Which command enables port security to use sticky MAC addresses on a switch?___
A. switchport port-security violation restrict
B. switchport port-security mac-address sticky
C. switchport port-security violation protect
D. switchport port-security
【单选题】
When you edit an IPS subsignature, what is the effect on the parent signature and the family of subsignatures?___
A. The change applies to the parent signature and the entire family of subsignatures
B. The change applies to the parent signature and the subsignature that you edit
C. The change applies only to subsignatures that are numbered sequentially after the subsignature that you edit
D. Other signatures are unaffected, the change applies only to the subsignature that you dit
【单选题】
Which type of mechanism does Cisco FirePOWER de ploy to protect ag detected moving across other networks?___
A. antivirus scanning
B. policy-based
C. reputation-based
D. signature-based
【单选题】
What action must you take on the ise to blacklist a wired device?___
A. Locate the switch through which the device is connected and push an a cl restricting all access by the device
B. Issue a CoA request for the de vice's mac address to each access switch in the network
C. Revoke the device's certificate so it is unable to authenticate to the network
D. Add the device's MAc address to a list of black listed devices
【单选题】
Which type of firewall can perform deep packet inspection?___
A. packet-filtering firewall
B. stateless firewall
C. application firewall
D. personal firewall
【单选题】
What is the main purpose of Control Plane Policing?___
A. to prevent exhaustion of route-proce ssor resources
B. to organize the egress packet queues
C. to define traffic classes
D. to maintain the policy map
【单选题】
Which attack can be prevented by OSPF authentication?___
A. smurf attack
B. IP spoofing attack
C. denial of service attack
D. buffer overflow attack
【单选题】
What is the best definition of hairpinning?___
A. ingress traffic that traverses the outbound interface on a device
B. traffic that enters one interface on a device and that exits through another interface
C. traffic that enters and exits a device through the same interface
D. traffic that tunnels through a device interface
【单选题】
Which SNMPv3 security level provides authentication using HMAC with MD5, but does not use encryption?___
A. authPriv
B. authNo Priv
C. noAuthNoPriv
D. NoauthPriv
【单选题】
You have implemented a dynamic blacklist, using security intelligence to block illicit network activity. However, the blacklist contains several approved connections that users must access for usiness pur poses. Which action can you take to retain the blacklist while allowing users to access the approve d sites?___
A. Create a whitelist and manually add the approved addresses.
B. Disable the dynamic blacklist and deny the specif ic address on a whitelist while permitting the others
C. Edit the dynamic blacklist to remove the approved addresses
D. Disable the dynamic blacklist and create a static blacklist in its place
【单选题】
When connecting to an external resource,you must change a source IP address to use one IP address from a range of 207.165.201.1 to 207.165.1.30. Which option do you implement ?___
A. dynamic source NAT that uses an IP ad dress as a mapped source
B. static destination NAT that uses a subnet as a real de stination
C. dynamic source NAT that uses a range as a mapped source
D. static destination NAT that uses a subnet as a real source
【单选题】
Refer to the exhibit. 【nat(ins,any)dynamic interface】Which ty pe of NaT is configured on a Cisco ASA?___
A. dynamic NAT
B. source identity NAT
C. dynamic PAT
D. identity twice NAT
【单选题】
Which mitigation technology for web-based threats prevents the removal of confidential data from the network?___
A. CTA
B. DCA
C. AMP
D. DLP
【单选题】
Refer to the exhibit. What is the effect of the given configuration?___
A. It establishes the preshared key for the switch
B. It establishes the preshared key for the firewall.
C. It establishes the preshared key for the Cisco ISE appliance
D. It establishes the preshared key for the router.
【多选题】
What are two major considerations when choosing between a SPAN and a TAP when plementing IPS?___
A. the type of analysis the iS will perform
B. the amount of bandwidth available
C. whether RX and TX signals will use separate ports
D. the way in which media errors will be handled
E. the way in which dropped packets will be handled
【多选题】
What are two direct-to-tower methods for redirecting web traffic to Cisco Cloud Web Security?___
A. third-party proxies
B. Cisco Catalyst platforms
C. Cisco NAC Agent
D. hosted PAC files
E. CiSco ISE
【多选题】
Which three descriptions of RADIUS are true? ___
A. It uses TCP as its transport protocol.
B. Only the password is encrypted
C. It supports multiple transport protocols
D. It uses UDP as its transport protocol
E. It combines authentication and authorization
F. It separates authentication,authorization,and accounting
推荐试题
【单选题】
无线天线避雷针的接地装置应单独设置,特殊情况下距环形接地装置不应小于_______。[311010103]___
A. 5m
B. 8m
C. 10m
D. 15m
【单选题】
ZPW-2000A无绝缘移频自动闭塞系统补偿电容采用_______进行现场设置。[312030201]___
A. △法
B. 每100m装一个
C. 等差法
D. 等间距法
【单选题】
ZC-8接地电阻测量仪在使用时,两接地棒即电位探针P'和电流探针C'沿直线相距_______。[322010103]___
A. 15m
B. 20m
C. 25m
D. 30m
【单选题】
S700K型电动转辙机因故不能转换到底时,电流一般不大于_______。[313010102]___
A. 1A
B. 3A
C. 5A
D. 8A
【单选题】
S700K电动转辙机的单线圈电阻不大于_______。[323010103]___
A. 50Ω
B. 54Ω
C. 58Ω
D. 64Ω
【单选题】
S700K电动转辙机代号A15/A16的输出额定转换力为_______。[311010103]___
A. 2500N
B. 3000N
C. 4500N
D. 6000N
【单选题】
S700K电动转辙机代号A17/A18的输出额定转换力为_______。[311010103]___
A. 2500N
B. 3000N
C. 4500N
D. 6000N
【单选题】
S700K电动转辙机代号A33/A34的输出额定转换力为_______。[311010103]___
A. 2500N
B. 3000N
C. 4500N
D. 6000N
【单选题】
JM-A型密贴检查器表示杆动程为_______。[311010103]___
A. 30mm~97mm
B. 65mm~120mm
C. 65mm~140mm
D. 90mm~150mm
【单选题】
JM-A型密贴检查器挤岔断表示的动程:从启动片的滚轮接触表示杆斜面开始为_______。[311010103]___
A. 10mm~13mm
B. 15mm~18mm
C. 15mm~20mm
D. 19mm~25mm
【单选题】
下列关于JM-A型密贴检查器说法正确的是:_______。[331010103]___
A. 每台密贴检查器应设有一组表示接点和一组斥离接点
B. 每台密贴检查器应设有一组表示接点和两组斥离接点
C. 每台密贴检查器应设有两组表示接点和一组斥离接点
D. 每台密贴检查器应设有两组表示接点和两组斥离接点
【单选题】
设在道岔两侧的JM-A型密贴检查器,一台密贴检查器的表示杆及其接点组检查尖轨的密贴位置,另一台密贴检查器的表示杆及其接点组检查尖轨的斥离_______以上位置。[331010204]___
A. 60mm
B. 65mm
C. 75mm
D. 78mm
【单选题】
JM-A型密贴检查器动接点环打入静接点片的深度应不小于_______。[332010204]___
A. 3mm
B. 4mm
C. 5mm
D. 6mm
【单选题】
JM-A型密贴检查器滚轮在表示杆缺口中平面或上平面滚动时,启动片离开表示杆的平面应为_______。[331010204]___
A. 0.3mm~0.8mm
B. 0.5mm~1.7mm
C. 0.3mm~2mm
D. 1mm~3mm
【单选题】
下列关于JM-B型密贴检查器说法正确的是:_______。[331010204]]___
A. 每台密贴检查器应设有一组表示接点和一组斥离接点
B. 每台密贴检查器应设有一组表示接点和两组斥离接点
C. 每台密贴检查器应设有两组表示接点和一组斥离接点
D. 每台密贴检查器应设有两组表示接点和两组斥离接点
【单选题】
JM-B型密贴检查器挤岔断表示的动程:从开关轴接触表示杆斜面开始小于或等于_______。[331010204]___
A. 3mm
B. 4mm
C. 5mm
D. 6mm
【单选题】
ELP-319型密贴检查器检测杆与接点座配合工作可检测_______尖轨动程。[331010204]___
A. 90mm~130mm
B. 170mm~190mm
C. 30mm~190mm
D. 50mm~100mm
【单选题】
S700K电动转辙机单芯电缆控制距离可达_______。[331010204]___
A. 1.5km
B. 2.0km
C. 2.5km
D. 3.0km
【单选题】
S700K型电动转辙机上下两检测杆无张嘴和左右偏移现象,检测杆头部的叉形连接头销孔的磨损旷量不大于_______。[312010204]___
A. 0.5mm
B. 1mm
C. 1.5mm
D. 2mm
【单选题】
三相电动机电源线中,任意两根线对调会使电动机_______。[32301024]___
A. 转速变慢
B. 转速变快
C. 不转
D. 反转
【单选题】
ZPW-2000A无绝缘移频自动闭塞系统_______用于实现主轨道电路、小轨道电路的调整。[311010103]___
A. 发送检测器
B. 侧线检测盘
C. 衰耗盘
D. 接收器
【单选题】
ZPW-2000R型无绝缘轨道电路在最不利条件下,用0.15Ω标准分路线分路,主轨道无分路死区段。调谐区分路死区段不大于_______。[331010103]___
A. 2m
B. 3m
C. 4m
D. 5m
【单选题】
ZP·WD型18信息移频轨道电路,在机车入口端轨面,用_______标准分路电阻线分路时,应满足动作机车信号的最小短路电流的要求。[311010103]___
A. 0.03Ω
B. 0.04Ω
C. 0.05Ω
D. 0.06Ω
【单选题】
ZP·WD型18信息移频轨道电路,在调整状态下,受电端接收盒限入电压应不小于_______,轨道电路应可靠工作。[322010101]___
A. 240mV
B. 250mV
C. 280mV
D. 290mV
【单选题】
连接两个节点的一段电路称为_______。[222000000]___
A. 回路
B. 开路
C. 断路
D. 支路
【单选题】
S700K型电动转辙机表示电路中电阻R1的阻值是_______。[312010103]___
A. 300Ω
B. 500Ω
C. 800Ω
D. 1000Ω
【单选题】
S700K型电动转辙机表示电路整流堆部分串入电阻R2的阻值是_______。[312010103]___
A. 300Ω
B. 500Ω
C. 800Ω
D. 1000Ω
【单选题】
信号微机监测系统不能监督与_______结合部有关状态。[311010105]___
A. 电务
B. 车务
C. 机务
D. 工务
【单选题】
在信号微机监测系统车站系统与人完成交互功能的是_______。[331010105]___
A. 上位机
B. 下位机
C. 采集机
D. CAN
【单选题】
在信号微机监测系统车站系统上位机通过_______与外界进行数据交换。[332010105]___
A. 下位机
B. CAN卡
C. 高速串口
D. 网卡
【单选题】
信号微机监测系统2DQJ光电探头黄灯亮绿灯灭表示道岔在_______。[331010105]___
A. 定位
B. 反位
C. 四开
D. 采集故障
【单选题】
信号微机监测系统车站系统上下位机之间采用_______通讯。[332010105]___
A. 网卡
B. 串口
C. CAN卡
D. 并口
【单选题】
在信号微机监测系统中,绝缘测试继电器动作靠_______板控制。[332010105]___
A. 模入
B. 开入
C. 模出
D. 开出
【单选题】
信号微机监测系统转辙机动作电流监测量程为0~_______。[332010102]___
A. 5A
B. 8A
C. 10A
D. 15A
【单选题】
信号微机监测系统电源对地漏泄电流交流监测量程为AC0~_______。[331010101]___
A. 100mA
B. 200mA
C. 300mA
D. 400mA
【单选题】
信号微机监测系统光电隔离模块工作电压一般为_______模块,用于交流、直流均可。[331010102]___
A. 5V
B. 12V
C. 16V
D. 24V
【单选题】
信号微机监测系统开关量采集器工作电源为直流_______。[331010102]___
A. 5V
B. 12V
C. 16V
D. 24V
【单选题】
在信号微机监测系统中综合采集机开出板第_______对应的声光报警继电器。[331010103]___
A. 26路
B. 37路
C. 40路
D. 47路
【单选题】
三相电路中,流过各相火线的电流称为_______。[322010101]___
A. 线电压
B. 相电压
C. 线电流
D. 相电流
【单选题】
信号微机监测系统转辙机动作时间监测量程为0~_______。[311010103]___
A. 10s
B. 15s
C. 20s
D. 30s