【单选题】
在正常刹车时，刹车压力指示在（）___
A. 刹车压力表
B. EWD
C. SD
D. 无指示
查看试卷，进入试卷练习
微信扫一扫，开始刷题
答案
D
解析
暂无解析
相关试题
【单选题】
刹车系统是：___
A. 绿系统带防滞，黄系统不带防滞，停留刹车
B. 绿或黄系统带防滞，黄系统不带防滞，停留刹车
C. 绿系统带或不带防滞，黄系统带防滞，停留刹车
D. 只有防滞断开
【单选题】
267.(A320)刹车储压器的预充压力___
A. A.根据系统的压力来确定
B. B.根据外界环境温度来确定
C. C.根据不同航空公司的不同规定来确定
D. D.根据充气工具要求来确定
【单选题】
272.(A320)下列关于起落架上锁机构叙述正确的是___
A. A.其是由液压开锁,液压锁定的
B. B.其是由液压开锁,机械锁定的
C. C.其是由机械开锁,液压锁定的
D. D.其是由机械开锁,机械锁定的
【单选题】
273.(A320)下列关于起落架收放的叙述不正确的是___
A. A.起落架控制有两套系统
B. B.有两个计算机LGCIU1和LGCIU2
C. C.每套系统都有各自的传感器
D. D.两套系统同时控制起落架系统工作
【单选题】
274.(A320)下列哪种情况可以进行正常刹车___
A. A.绿系统工作正常,BSCU工作正常
B. B.由刹车储压器提供刹车压力
C. C.A/SKID&N/WSTRG电门关断
D. D.停留刹车电门位于ON位
【单选题】
275.(A320)在ECAM机轮（WHEEL）页面上，下面什么信息是我们得不到的___
A. A.刹车压力
B. B.起落架舱门状态
C. C.刹车温度
D. D.刹车状态
【单选题】
277.(A320)在停机坪上，一台发动机运转时，停留刹车置于ON位，ECAM上的停留刹车备忘显示为___
A. A.绿色
B. B.无显示
C. C.琥珀色
D. D.红色
【单选题】
282.(A320)当防滞和前轮转弯操纵开关置于OFF位时：___
A. A.只有前轮转弯断开
B. B.防滞和前轮转弯断开
C. C.防滞提供固定的飞机减速
D. D.只有防滞断开
【单选题】
286.(A320)当起落架控制手柄置位于收上(UP)位时___
A. A.液压系统首先作动打开起落架下锁机构
B. B.LGCIU控制液压切断valve打开
C. C.两个LGCIU进行控制转换
D. D.以上答案都不正确
【单选题】
288.(A320)当作动重力放起落架手柄时___
A. A.液压安全valve被关断。
B. B.务必将起落架控制手柄选择于放下位。
C. C.会机动打开相应舱门和起落架的上锁机构。
D. D.以上答案都不正确
【单选题】
289.(A320)地面打开起落架舱门___
A. A.务必关断绿液压系统
B. B.是通过机械开锁,舱门依靠重力打开的
C. C.是通过位于液压勤务舱内的电门进行的
D. D.以上答案都不正确
【单选题】
290.(A320)更换刹车组件时，下面做法不正确的是___
A. A.需要拆装轮速传感器
B. B.需要拆装刹车风扇
C. C.需要将防咬剂涂抹在轮速传感器的传动轴齿表面
D. D.需要安装轮轴保护套
【单选题】
291.(A320)关于重力放起落架的说法，下面正确的是___
A. A.用起落架控制手柄操作
B. B.用重力起落架释放手柄操作
C. C.用拔跳开关的方法来操作
D. D.用前轮转弯/刹车防滞电门来操作
【单选题】
292.(A320)关于主起落架扭力连杆的作用，下面说法错误的是___
A. A.对起落架内外筒有连接作用
B. B.相对固定内筒，防止内筒转动
C. C.连接阻尼器用于着陆时对起落架进行缓冲和减摆
D. D.辅助前轮转弯，可以使主轮转动一定的角度
推荐试题
【单选题】
What new feature was introduced to the Content Library in vSphere 6.5?___
A. Mount an ISO directly from the Content Library.
B. Deploy a virtual machine from an OVF Package in a Content Library.
C. Upload a File from a URL to a Library Item.
D. Upload a File from a Local System to a Library Item.
【单选题】
How can an administrator exclude Encryption rights from a support engineer?___
A. Clone the role Virtual machine power user, remove Cryptographic operations privileges.
B. Clone the role Administrator and assign to the support engineer.
C. Clone the role Virtual machine power user and assign to the support engineer.
D. Clone the role No cryptography administrator and select privileges only for the support engineer.
【单选题】
The administrator must back up a vCenter HA deployment. Which component must be backed up?___
A. Passive node
B. Witness node
C. External database
D. Active node
【单选题】
What is the supported protocol to perform remote L3 traffic monitoring in vSphere 6.5?___
A. VXLAN
B. ERSPAN
C. RSPAN
D. SPAN
【单选题】
What are the minimum hardware requirements for a Windows vCenter Server with embedded PSC that manages a “Small” environment?___
A. 2vCPUs, 16 GB RAM
B. 4 vCPUs, 16 GB RAM
C. 2 vCPUs, 10 GB RAM
D. 4 vCPUs, 10 GB RAM
【单选题】
Which port is used for communication between ESXi and vSphere Data protection?___
A. 80
B. 443
C. 902
D. 22
【单选题】
What can prevent Storage DRS from functioning on a datastore?___
A. The datastore is configured for Virtual Machine Swapfile location.
B. The datastore is shared across multiple datacenters.
C. The datastore is connected to a host that is running Storage I/O Control.
D. Storage DRS advanced option IgnoreAffinityRulesForMaintenance is set to 1.
【单选题】
When troubleshooting VMware vCenter Server issues, when logging level provides maximum detail?___
A. Verbose
B. Trivia
C. Info
D. Error
【单选题】
What new feature is introduced in NFS 4.1 on ESXi 6.5?___
A. IPv6
B. KRB5i
C. AUTH_SYS
D. Storage DRS
【单选题】
What configuration option would ensure that a virtual NUMA topology is defined on VMs having more than eight virtual CPUs?___
A. cupid.coresPerSocket
B. numa.vcpu.followcorespersocket
C. numa.vcpu.maxPerVirtualNode
D. numa.vcpu.min
【单选题】
What is the minimum disk space required to deploy vSphere Data Protection (VDP) with 8 TB configuration?___
A. 4 TB
B. 16 TB
C. 8 TB
D. 12 TB
【单选题】
What advanced option for vSphere HA defines a maximum number of reset attempts by VMCP for a virtual machine?___
A. das.maxterminates
B. das.isolationshutdowntimeout
C. das.maxresets
D. fdm.isolationpolicydelaysec
【单选题】
What vSphere technology enables the administrator to ensure consistent configuration at scale?___
A. PowerCLI
B. Host Profiles
C. esxcli
D. vSphere Web Client
【单选题】
Which port is used for vSphere HA agent-to-agent communication?___
A. 443
B. 8182
C. 22
D. 902
【单选题】
Which log file would assist in identifying an issue that occurred during the database export phase of a vCenter Server upgrade process?___
A. vcdb_import.out
B. export.json
C. export-upgrade-runner.log
D. vcdb_export.out
【单选题】
Bidirectional CHAP is support by which storage initiator?___
A. software FCoE HBA
B. Fibre Channel HBA
C. independent hardware iSCSI HBA
D. dependent hardware iSCSI HBA
【单选题】
What is a pool of raw storage capacity that a storage system can provide to Virtual Volumes?___
A. protocol endpoint
B. storage container
C. storage provider
D. datastore
【单选题】
vSphere 6.5 DRS is now Network-Aware. Based on network utilization, when will DRS balance VMs?___
A. DRS will balance VMs when a network resource pool is configured for VMs.
B. DRS will balance VMs when Network I/O Control is enabled.
C. DRS will place VMs on initial boot for hosts that have network utilization lower that the threshold.
D. DRS will vMotion VMs when network utilization is higher than the threshold on a particular host.
【单选题】
A scripted upgrade of ESXi fails due to an incorrect parameter in the upgrade script. What file must the administrator modify to correct the problem?___
A. vmreconfig.pl
B. hostinfo.pl
C. ks.cfg
D. boot.cfg
【单选题】
A VM folder contains VM1 and VM2. Group A has permission to power on virtual machines, defined on the VM folder and its children. Group B has permission to power off virtual machine VM2. If a user is a member of group A and B, what action can the user perform?___
A. Suspend VM2.
B. Power off VM1.
C. Power on and power off VM1.
D. Power on and power off VM2.
【单选题】
The networking team has requested to have a dedicated network for iSCSI traffic. This task has been assigned to the vSphere Administrator. What is the VMware-recommended way to accomplish this?___
A. Configure Static Routes on each ESXi Server.
B. Configure the right subnet.
C. Create a custom IP Stack.
D. Define a dedicated gateway for the iSCSI vmkernel.
【单选题】
To prevent possible failures or issues during a vSphere upgrade, which component should be upgraded first?___
A. ESXi Hosts
B. virtual machines
C. datastores
D. vCenter Server
【单选题】
What is the command for updating an ESXi host?___
A. esxcli software vib update –d /vmfs/volumes/Datastore/DirectoryName/PatchName.zip
B. esxupdate software update –d”/vmfs/volumes/Datastore/DirectoryName/PatchName.zip”
C. esxcli software update –d “/vmfs/volumes/Datastore/DirectoryName/PatchName.zip”
D. esxupdate software vib update –d /vmfs/volumes/Datastore/DirectoryName/PatchName.zip
【单选题】
A vSphere Administrator would like to identify which physical NUMA node their virtual machine is currently residing on. What esxtop metric would provide this information?___
A. GST_ND[x]
B. OVD_ND[x]
C. NRMEM
D. NHN
【单选题】
How can a vSphere administrator ensure that two virtual machines never run on the same datastore in a datastore cluster, while permitting the VMs to be load-balanced?___
A. Use an Intra-VM Anti-Affinity Rule.
B. Configure a storage DRS VM override.
C. Disable storage
D. RS for the VMs.
【单选题】
What is the VMware-recommended way to move a physical adapter out of Network I/O Control’s scope?___
A. Set the teaming policy to “Route Based on Physical NIC Load.”
B. Add the vmnic to the Net.NetNiocAllowOverCommit parameter in Advanced System Settings.
C. Add the vmnic to the Net.IOControlPnicOptOut parameter in Advanced System Settings.
D. Move the vmnic to a different vmUplink port on the Distributed Switch.
【单选题】
A VM folder contains VM1 and VM2. Group A has permission to power on virtual machines, defined on the VM folder and its children. Group B has permission to power off virtual machines, defined on the VM folder and its children. If a user is a member of Groups A and B, what will be the user’s effective permission on VM1 and VM2?___
A. Power on
B. Power off.
C. Power on and Power off.
D. Reset.
【单选题】
Group 1 is granted console interaction on a VM folder. User 1 is granted no console interaction on the same VM folder. What will be the outcome if User 1 tries to access the console of a virtual machine?___
A. User 1 will not be able to access the virtual machines in the VM folder.
B. User 1 will not have access to the virtual machine console.
C. User 1 will have access to the virtual machine console.
D. User 1 will have console access only via the vSphere Web Client.
【单选题】
Which statement is true regarding the use of VMFS3 datastores with vSphere 6.5?___
A. VMFS3 datastores can be used but not created.
B. VMFS3 datastores can be neither used nor created.
C. VMFS3 datastores will be present but unmounted.
D. VMFS3 datastores can be created and used.
【单选题】
In the Exhibit, each VM has a 1GHz non-expandable reservation. If all VMs are powered on in sequence, what would be the outcome?___
A. VM4 cannot be powered on.
B. VM5 cannot be powered on.
C. VM6 cannot be powered on.
D. VM3 cannot be powered on.
【单选题】
vSphere 6.5 introduced MAClearning capabilities for VMware’s virtual switches. What three benefits will it provide? (Choose three.)___
A. Reduced memory consumption.
B. Reduced consumption of extra CPU cycles.
C. Increased network throughput.
D. Prevent packet flooding inside the vSwitch.
【单选题】
What is the default pathing policy for most active-active arrays?___
A. Fixed
B. Most Recently Used
C. Dynamic
D. isk Morroring
【单选题】
Which command will show the iSCSI sessions on a ESXi 6.5 host?___
A. esxcli storage iscsi session get
B. esxcli iscsi session get
C. esxcli storage iscsi session
D. esxcli iscsi session list
【单选题】
Which of the following is not a parameter for traffic filtering or marking?___
A. virtual port ID
B. Protocol
C. Traffic Direction
D. DSCP value
E. Traffic redirection
【单选题】
A vSphere administrator wants to enable a virtual machine with Secure Boot, but in VM setting, Secure Boot option was not found under Boot Options. What could be the cause?___
A. The virtual hardware is not compatible.
B. The virtual machine has missing drivers.
C. The virtual machine OS does not support secure boot.
D. VMware Tools is not upgraded.
【单选题】
A virtual machine is connected on a distributed port group where the average bandwidth configured in the traffic shaping policy is 100 Mbps. The VM network adapter is configured with a reservation of 200 Mbps. What is the VM’s effective bandwidth?___
A. 200 Mbps
B. 100 Mbps
C. 150 Mbps
D. 400 Mbps
【多选题】
What are two reasons why a datastore in a Storage DRS cluster cannot enter maintenance mode?(Choose two.)___
A. Storage latency is too high to allow Storage DRS initiate Storage vMotion.
B. Storage DRS is configured for a VMFS3 datastore.
C. Storage
D. RS is disabled on the virtual disk.
【多选题】
What two methods are used to configure VMware vSphere Storage I/O Control shares and limits? (Choose two.)___
A. Assign shares and limits to VM virtual disks.
B. Assign shares and limits to datastores.
C. Assign shares and limits to Storage (DRS) clusters.
D. Assign shares and limits using VM storage policies.
【多选题】
ESXi 6.5 introduces VMFS6, which supports both 512e and 512n devices. What three configurations are supported when using these devices? (Choose three.) ___
A. Hosts with both 512e and 512n devices.
B. Storage vMotion between both 512e and 512n devices.
C. Datastore Extents spanned between both 512e and 512n devices.
D. Storage DRS clusters containing only both 512e and 512n devices.
【多选题】
A vSphere Administrator observes that the Primary VM configured with Fault Tolerance is executing slowly. After further investigation, it is determined that the Secondary VM is on an overcommitted ESXi host. What two methods will correct the problem? (Choose two.)___
A. Use Storage vMotion to migrate the Secondary VM to another datastore.
B. Use vMotion to migrate the Secondary VM to a different ESXi host.
C. Configure a CPU limit on the Primary VM which will also apply to the Secondary VM.
D. Turn off and turn on FT in order to recreate the Secondary VM on a different datastore.
