【单选题】
Which port is used for communication between ESXi and vSphere Data protection?___
A. 80
B. 443
C. 902
D. 22
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
C
解析
暂无解析
相关试题
【单选题】
What can prevent Storage DRS from functioning on a datastore?___
A. The datastore is configured for Virtual Machine Swapfile location.
B. The datastore is shared across multiple datacenters.
C. The datastore is connected to a host that is running Storage I/O Control.
D. Storage DRS advanced option IgnoreAffinityRulesForMaintenance is set to 1.
【单选题】
When troubleshooting VMware vCenter Server issues, when logging level provides maximum detail?___
A. Verbose
B. Trivia
C. Info
D. Error
【单选题】
What new feature is introduced in NFS 4.1 on ESXi 6.5?___
A. IPv6
B. KRB5i
C. AUTH_SYS
D. Storage DRS
【单选题】
What configuration option would ensure that a virtual NUMA topology is defined on VMs having more than eight virtual CPUs?___
A. cupid.coresPerSocket
B. numa.vcpu.followcorespersocket
C. numa.vcpu.maxPerVirtualNode
D. numa.vcpu.min
【单选题】
What is the minimum disk space required to deploy vSphere Data Protection (VDP) with 8 TB configuration?___
A. 4 TB
B. 16 TB
C. 8 TB
D. 12 TB
【单选题】
What advanced option for vSphere HA defines a maximum number of reset attempts by VMCP for a virtual machine?___
A. das.maxterminates
B. das.isolationshutdowntimeout
C. das.maxresets
D. fdm.isolationpolicydelaysec
【单选题】
What vSphere technology enables the administrator to ensure consistent configuration at scale?___
A. PowerCLI
B. Host Profiles
C. esxcli
D. vSphere Web Client
【单选题】
Which port is used for vSphere HA agent-to-agent communication?___
A. 443
B. 8182
C. 22
D. 902
【单选题】
Which log file would assist in identifying an issue that occurred during the database export phase of a vCenter Server upgrade process?___
A. vcdb_import.out
B. export.json
C. export-upgrade-runner.log
D. vcdb_export.out
【单选题】
Bidirectional CHAP is support by which storage initiator?___
A. software FCoE HBA
B. Fibre Channel HBA
C. independent hardware iSCSI HBA
D. dependent hardware iSCSI HBA
【单选题】
What is a pool of raw storage capacity that a storage system can provide to Virtual Volumes?___
A. protocol endpoint
B. storage container
C. storage provider
D. datastore
【单选题】
vSphere 6.5 DRS is now Network-Aware. Based on network utilization, when will DRS balance VMs?___
A. DRS will balance VMs when a network resource pool is configured for VMs.
B. DRS will balance VMs when Network I/O Control is enabled.
C. DRS will place VMs on initial boot for hosts that have network utilization lower that the threshold.
D. DRS will vMotion VMs when network utilization is higher than the threshold on a particular host.
【单选题】
A scripted upgrade of ESXi fails due to an incorrect parameter in the upgrade script. What file must the administrator modify to correct the problem?___
A. vmreconfig.pl
B. hostinfo.pl
C. ks.cfg
D. boot.cfg
【单选题】
A VM folder contains VM1 and VM2. Group A has permission to power on virtual machines, defined on the VM folder and its children. Group B has permission to power off virtual machine VM2. If a user is a member of group A and B, what action can the user perform?___
A. Suspend VM2.
B. Power off VM1.
C. Power on and power off VM1.
D. Power on and power off VM2.
【单选题】
The networking team has requested to have a dedicated network for iSCSI traffic. This task has been assigned to the vSphere Administrator. What is the VMware-recommended way to accomplish this?___
A. Configure Static Routes on each ESXi Server.
B. Configure the right subnet.
C. Create a custom IP Stack.
D. Define a dedicated gateway for the iSCSI vmkernel.
【单选题】
To prevent possible failures or issues during a vSphere upgrade, which component should be upgraded first?___
A. ESXi Hosts
B. virtual machines
C. datastores
D. vCenter Server
【单选题】
What is the command for updating an ESXi host?___
A. esxcli software vib update –d /vmfs/volumes/Datastore/DirectoryName/PatchName.zip
B. esxupdate software update –d”/vmfs/volumes/Datastore/DirectoryName/PatchName.zip”
C. esxcli software update –d “/vmfs/volumes/Datastore/DirectoryName/PatchName.zip”
D. esxupdate software vib update –d /vmfs/volumes/Datastore/DirectoryName/PatchName.zip
【单选题】
A vSphere Administrator would like to identify which physical NUMA node their virtual machine is currently residing on. What esxtop metric would provide this information?___
A. GST_ND[x]
B. OVD_ND[x]
C. NRMEM
D. NHN
【单选题】
How can a vSphere administrator ensure that two virtual machines never run on the same datastore in a datastore cluster, while permitting the VMs to be load-balanced?___
A. Use an Intra-VM Anti-Affinity Rule.
B. Configure a storage DRS VM override.
C. Disable storage
D. RS for the VMs.
【单选题】
What is the VMware-recommended way to move a physical adapter out of Network I/O Control’s scope?___
A. Set the teaming policy to “Route Based on Physical NIC Load.”
B. Add the vmnic to the Net.NetNiocAllowOverCommit parameter in Advanced System Settings.
C. Add the vmnic to the Net.IOControlPnicOptOut parameter in Advanced System Settings.
D. Move the vmnic to a different vmUplink port on the Distributed Switch.
【单选题】
A VM folder contains VM1 and VM2. Group A has permission to power on virtual machines, defined on the VM folder and its children. Group B has permission to power off virtual machines, defined on the VM folder and its children. If a user is a member of Groups A and B, what will be the user’s effective permission on VM1 and VM2?___
A. Power on
B. Power off.
C. Power on and Power off.
D. Reset.
【单选题】
Group 1 is granted console interaction on a VM folder. User 1 is granted no console interaction on the same VM folder. What will be the outcome if User 1 tries to access the console of a virtual machine?___
A. User 1 will not be able to access the virtual machines in the VM folder.
B. User 1 will not have access to the virtual machine console.
C. User 1 will have access to the virtual machine console.
D. User 1 will have console access only via the vSphere Web Client.
【单选题】
Which statement is true regarding the use of VMFS3 datastores with vSphere 6.5?___
A. VMFS3 datastores can be used but not created.
B. VMFS3 datastores can be neither used nor created.
C. VMFS3 datastores will be present but unmounted.
D. VMFS3 datastores can be created and used.
【单选题】
In the Exhibit, each VM has a 1GHz non-expandable reservation. If all VMs are powered on in sequence, what would be the outcome?___
A. VM4 cannot be powered on.
B. VM5 cannot be powered on.
C. VM6 cannot be powered on.
D. VM3 cannot be powered on.
【单选题】
vSphere 6.5 introduced MAClearning capabilities for VMware’s virtual switches. What three benefits will it provide? (Choose three.)___
A. Reduced memory consumption.
B. Reduced consumption of extra CPU cycles.
C. Increased network throughput.
D. Prevent packet flooding inside the vSwitch.
【单选题】
What is the default pathing policy for most active-active arrays?___
A. Fixed
B. Most Recently Used
C. Dynamic
D. isk Morroring
【单选题】
Which command will show the iSCSI sessions on a ESXi 6.5 host?___
A. esxcli storage iscsi session get
B. esxcli iscsi session get
C. esxcli storage iscsi session
D. esxcli iscsi session list
【单选题】
Which of the following is not a parameter for traffic filtering or marking?___
A. virtual port ID
B. Protocol
C. Traffic Direction
D. DSCP value
E. Traffic redirection
【单选题】
A vSphere administrator wants to enable a virtual machine with Secure Boot, but in VM setting, Secure Boot option was not found under Boot Options. What could be the cause?___
A. The virtual hardware is not compatible.
B. The virtual machine has missing drivers.
C. The virtual machine OS does not support secure boot.
D. VMware Tools is not upgraded.
【单选题】
A virtual machine is connected on a distributed port group where the average bandwidth configured in the traffic shaping policy is 100 Mbps. The VM network adapter is configured with a reservation of 200 Mbps. What is the VM’s effective bandwidth?___
A. 200 Mbps
B. 100 Mbps
C. 150 Mbps
D. 400 Mbps
【多选题】
What are two reasons why a datastore in a Storage DRS cluster cannot enter maintenance mode?(Choose two.)___
A. Storage latency is too high to allow Storage DRS initiate Storage vMotion.
B. Storage DRS is configured for a VMFS3 datastore.
C. Storage
D. RS is disabled on the virtual disk.
【多选题】
What two methods are used to configure VMware vSphere Storage I/O Control shares and limits? (Choose two.)___
A. Assign shares and limits to VM virtual disks.
B. Assign shares and limits to datastores.
C. Assign shares and limits to Storage (DRS) clusters.
D. Assign shares and limits using VM storage policies.
【多选题】
ESXi 6.5 introduces VMFS6, which supports both 512e and 512n devices. What three configurations are supported when using these devices? (Choose three.) ___
A. Hosts with both 512e and 512n devices.
B. Storage vMotion between both 512e and 512n devices.
C. Datastore Extents spanned between both 512e and 512n devices.
D. Storage DRS clusters containing only both 512e and 512n devices.
【多选题】
A vSphere Administrator observes that the Primary VM configured with Fault Tolerance is executing slowly. After further investigation, it is determined that the Secondary VM is on an overcommitted ESXi host. What two methods will correct the problem? (Choose two.)___
A. Use Storage vMotion to migrate the Secondary VM to another datastore.
B. Use vMotion to migrate the Secondary VM to a different ESXi host.
C. Configure a CPU limit on the Primary VM which will also apply to the Secondary VM.
D. Turn off and turn on FT in order to recreate the Secondary VM on a different datastore.
【多选题】
Which two features require the use of Host Profiles? (Choose two.)___
A. Host Customizations
B. shared storage
C. Auto
D. eploy
【多选题】
What three processes on the vCenter Server Appliance (VCSA) does“vmware-watchdog monitor? (Choose three.) ___
A. vmware-eam
B. vmcad
C. vmware-vpostgres
D. vpxd
E. vsan-health
【多选题】
What three processes on the vCenter Server Appliance (VCSA) does“vmware-watchdog monitor? (Choose three.) ___
A. vmware-eam
B. vmcad
C. vmware-vpostgres
D. vpxd
E. vsan-health
【多选题】
Which two statements correctly describe VM-Host affinity rules? (Choose two.) ___
A. When there is more than one VM-Host affinity rule in a vSphere DRS cluster, the rules are applied equally.
B. After creating a VM-Host affinity rule, its ability to function in relation to other rules is predetermined.
C. When there is more than one VM-Host affinity rule in a vSphere
D. RS cluster, the rules will be ranked.
【多选题】
An administrator wants to enable proactive HA by moving virtual machines automatically if a hardware alert is triggered. What are the three required settings? (Choose three.)___
A. Set vSphere DRS Automation to Partially Automated.
B. Turn on Proactive HA.
C. Set the Proactive HA Automation Level to Manual.
D. Set the Proactive HA Automation Level to Automated.
E. Turn on vSphere HA and vSphere DRS.
【多选题】
If vCenter Server 5.5 installation has one or more services deployed remotely, which three services are relocated to vCenter Server 6.5 on upgrade? (Choose three.)___
A. vCenter Inventory Services
B. vSphere Authentication Proxy
C. vSphere Web Client
D. vSphere
E. SXi Dump Collector
推荐试题
【单选题】
等离了弧切割不锈钢、铝等厚度可达 ___mm以上
A. 100
B. 150
C. 200
D. 300
【单选题】
___是等离子弧切割设备的控制箱中没有的
A. 程序控制装置
B. 高频振荡器
C. 电磁气阀
D. 高压脉冲稳弧器
【单选题】
等离子弧切割气体的作用不是 ___的
A. 作为等离子弧介质,并压缩电弧
B. 防止钨极氧化烧损
C. 冷却手把
D. 形成隔热层,保护喷嘴不被烧坏
【单选题】
___不属于等离子弧切割工艺参数
A. 气体流量
B. 切割速度
C. 钨极端部到喷嘴的距离
D. 电源极性
【单选题】
___不是转移型等离子弧时产生双弧的原因
A. 钨极与喷嘴不同心过大
B. 钨极内缩量过大
C. 空载电压过高
D. 气体流量太小
【单选题】
穿透型等离子弧焊接,目前可一次焊透厚度 ___ mm对接不开坡口的不锈钢
A. 12
B. 10
C. 8
D. 6
【单选题】
___不是影响等离子弧压缩程度比较敏感的参数
A. 喷嘴孔径和孔道长度
B. 离子气流量
C. 焊接电流和焊接速度
D. 钨极直径
【单选题】
冷却速度是焊接热循环的一个重要参数,通常用起关键作用的___时间表示
A. 从1300℃冷却到1100℃的
B. 从1100℃冷却到800℃的
C. 从800℃冷却到500℃的
D. 从500℃冷却到300℃的
【单选题】
___不是影响焊接热循环的因素
A. 焊接工艺参数
B. 预热和层间温度
C. 焊后热处理
D. 焊接方法
【单选题】
___是焊缝一次结晶的组织特征
A. 等轴晶
B. 粒状晶
C. 絮状晶
D. 柱状晶
【单选题】
钢焊缝中夹杂物主要有氧化物和 ___两种
A. 氧化物
B. 硫化物
C. 氢化物
D. 氮化物
【单选题】
合金元素含量较少的普通低合金钢焊缝,在一般冷却速度下二次结晶后的组织为___
A. 铁素体加少量马氏体
B. 铁素体加少量针状贝氏体
C. 铁素体加少量珠光体
D. 铁素体加少量粒状贝氏体
【单选题】
二次结晶组织直接影响焊缝金属的力学性能,珠光体强度___,塑性和韧性;( )
A. 较低;好
B. 较高;较差
C. 高;差
D. 相当高;较良好
【单选题】
___不是钢电弧焊时氢的来源
A. 锈中的结晶水
B. 焊条药皮中的有机物
C. 母材和焊丝中的氢
D. 工件和焊丝表面的油污
【单选题】
___几乎是熔焊时氮的唯一来源
A. 母材中的氮
B. 焊条药皮中的氮化物
C. 空气中的氮气
D. 焊丝中的氮
【单选题】
低碳钢焊接接头中性能最差的是___
A. 焊缝区
B. 母材
C. 熔合区和过热区
D. 正火区
【单选题】
___不是低碳钢焊接热影响区的组成部分
A. 过热区
B. 部分淬火区
C. 正火区
D. 部分相变区
【单选题】
___不是调质状态的调质钢焊接热影响区的组成部分
A. 淬火区
B. 正火区
C. 部分淬火区
D. 回火软化区
【单选题】
___不是一种焊接变形
A. 弯曲变形
B. 角变形
C. 热变形
D. 收缩变形
【单选题】
焊接线能量越大,焊接引起的变形___
A. 一样
B. 略小
C. 越小
D. 越大
【单选题】
反变形法主要用来减小弯曲变形和___
A. 收缩变形
B. 扭曲变形
C. 角变形
D. 错边变形
【单选题】
火焰矫正焊接变形时,最高加热温度不宜超过___℃
A. 1300
B. 1100
C. 900
D. 800
【单选题】
火焰矫正法适用于 ___构件矫正焊接变形
A. 奥氏体不锈钢
B. 珠光体耐热钢
C. 16Mn钢
D. 中碳钢
【单选题】
对于___,焊后可以不必采取消除残余应力的措施
A. 塑性较差的高强钢焊接结构
B. 刚性拘束度大的厚壁压力容器结构
C. 存在较大的三向拉伸残余应力的结构
D. 低碳钢、16Mn等一般性焊接结构
【单选题】
___不是减小焊接应力的措施
A. 采用合理的焊接顺序和方向
B. 采有较小的焊接线能量
C. 预热
D. 采用较大的焊接线能量
【单选题】
消除应力退火一般能消除残余应力___以上
A. 90%~95%
B. 80%~90%
C. 70%~80%
D. 60%~70%
【单选题】
___不是影响焊接性的因素
A. 金属材料的种类及其化学成分
B. 焊接方法
C. 焊接操作技术
D. 构件使用要求
【单选题】
低合金高强度结构钢15MnVN属于___
A. Q390
B. Q420
C. Q460
D. Q490
【单选题】
___不属于低合金专业用结构钢
A. 耐蚀钢
B. 低合金低温钢
C. 马氏体耐热钢
D. 珠光体耐热钢
【单选题】
屈服点在___Mpa以上的低合金结构钢焊接时,一般需要预热
A. 345
B. 390
C. 420
D. 460
【单选题】
低合金结构钢采取局部预热时,预热范围为焊缝两侧各不小于焊件厚度的3倍,且不小于 ___mm
A. 50
B. 100
C. 200
D. 300
【单选题】
低合金结构钢电渣焊焊缝及粗晶区晶粒粗大,焊后必须正火处理以___,提高冲击韧度
A. 细化晶粒
B. 增大晶粒
【单选题】
___不是厚板窄间隙焊的优点
A. 生产率高
B. 焊接材料和能源消耗低
C. 热输入量小
D. 不易产生夹渣
【单选题】
16Mn钢焊接时,焊条应选用___
A. E4303
B. E4315
C. E5515-G
D. E5015
【单选题】
15MnV钢属于___钢
A. Q390
B. Q420
C. Q460
D. Q490
【单选题】
15MnTi钢是___状态下使用的钢种
A. 热轧
B. 退火
C. 回火
D. 正火
【单选题】
18MnMoNb钢是中温厚壁压力容器和锅炉用钢,最高工作温度可达___℃
A. 300
B. 350
C. 400
D. 450
【单选题】
18MnMoNb钢的使用状态为___
A. 正火加回火
B. 退火
C. 热轧
D. 热轧加回火
【单选题】
18MnMoNb钢的焊接性较差,焊前需要预热,预热温度为___℃
A. 100~150
B. 150~180
C. 180~250
D. 250~300
【单选题】
18MnMoNb钢焊条电弧焊或埋弧自动焊焊后,要进行回火或消除应力热处理,其加热温度为___℃
A. 300~350
B. 400~450
C. 500~550
D. 600~650