【单选题】
当驾驶舱里”EMEREXITLT”选择器放在”ARM”位,以下说法不正确的是。___
A. A.ACBUS1断电,客舱应急灯及EXIT符号点亮.
B. B.座舱失去压力后,客舱应急灯及EXIT符号点亮.
C. C.28VDCESSSHEDBUS断电,临近地板应急撤离标记灯点亮.
D. D.“NOSMOKE”电门置于”ON”位
E. XIT符号点完.
查看试卷,进入试卷练习
微信扫一扫,开始刷题

答案
B
解析
暂无解析
相关试题
【单选题】
在FAP面板上约"MAIN0FF"按压后,以下说法不正确的是___
A. A.去压”MAIN.0N”按钮后,入口灯及客舱灯处于全主.
B. B.按压入口area的”DIM2”旷按钮后,按旷”LAV”按钮会点亮所有厕所灯.
C. C.按压入口area的”DIM1”旷按钮后,按旷”READ”按钮会点亮所有客舱阅读灯.
D. D.按压”WDO”按钮后,相应客舱窗户灯不会点亮.
【单选题】
什么时候应急灯光系统由EPSU内的电池供电?___
A. 当EMEREXITLT选择开关放ON位;
B. 当前服务面板上的EMERLIGHT按钮按下且28VDCESSBUS失电后;
C. 当主灯光系统故障。
D.
【单选题】
下述说法哪种正确?___
A. 在应急供电情况下,只要顶板灯电门不放置在关断"OFF"位,则副驾驶上方的顶板灯保持可用;
B. 在应急供电情况下,无论顶板灯电门放置在什么位置,副驾驶上方的顶板灯保持可用;
C. 在应急供电情况下,无论顶板灯电门放置在什么位置,副驾驶上方的顶板灯不可用。
D.
【单选题】
请勿吸烟,系好安全带,回到座位及出口灯何时亮?___
A. A适当接通开关及/或探测到过高的座舱高度
B. B适当关闭开关及/或探测到过高的座舱高度
C. CB都不完全对
D. DAB上面两项都对
【单选题】
在驾驶舱头顶板上把电子舱灯控制电门放AUTO位,下列哪种说法是正确的:___
A. 飞机在地面时电子舱的灯自动亮.
B. 飞机在地面时电子舱的灯自动灭
C. 打开电子舱门时电子舱内的灯自动亮.
D. 电子舱门关上时的灯是亮的
【单选题】
以下哪一组全是外部灯光:___
A. 门出口滑梯灯、货舱灯、滑行灯、航行灯
B. 转弯灯、大翼照明灯、防撞灯、航行灯
C. 轮舱灯、滑行灯、频闪灯、标志灯
D. 舱顶灯、货舱灯、防冰灯、滑行灯
【单选题】
飞机的防撞灯能够频繁闪烁是因为:___
A. 控制部件中有改变灯光供电电压的变压器
B. 控制部件中有改变灯光供电电流变流器
C. 控制部件中有内部集成了定时器和脉冲发生器的电源组件
D. 控制部件中有防撞灯控制继电器
【单选题】
关于外部灯光,以下说法正确的是?___
A. 打开外部灯光的时候必须注意相关工作area有无工作人员,以免过强的光线造成眼睛的伤害
B. 当封飞机的时候,应该检查全部的灯光控制电门都在OFF位
C. 航行灯控制电门在1号位置的时候,标志灯也会亮,航行灯在2号位的时候,标志灯不亮
D. 更换頻散灯的时候要用专用设备放电
【单选题】
在FAP面板上将MAIN0FF按钮按压后,以下说法不正确的是:___
A. 按压MAIN0N按钮后,入口灯及客舱灯处于全亮
B. 按压ENTRYAREA的BRT按钮后,按压LAV按钮会点亮所有厕所灯
C. 按压客舱area的DIM1按钮后,按压ATTN按钮会点亮所有客舱乘务员工作灯
D. 按压WDO按钮后,相应客舱窗户灯点亮
【单选题】
哪些灯是可以由应急供电组件供电的?___
A. A除了驾驶舱应急照明灯和洗手间辅助灯以外的所有属于应急灯光系统的灯。
B. B只有地板接近灯。
C. C只有逃生滑梯和翼上出口灯。
D. D除了驾驶舱应急照明灯外的所有属于应急灯光系统的灯
【单选题】
何时整个应急照明系统由EPSU内的电瓶供电___
A. 当驾驶舱里MEMER.EXIT.LTN选择器放在”0N”位.
B. 当FAP里”EMERLIGHT”按钮按压后.
C. 当驾驶舱里”EMEREXITLT”选择器放在”ARM”位且28VACESSBUS1断电ESSBUS断电.
D. 当驾驶舱里”EMEREXITLT”选择器放在”ARM”位且115VACBUS1断电.
【单选题】
当RUNTURN-OFF灯的开关接通,以下那种情况灯会熄灭:___
A. 当前起落架收进后
B. 当前起落架放下锁好
C. 除非开关OFF位,否则总时亮的
D. 以上答案均不对
【单选题】
飞机电源系统正常的情况下,将驾驶舱应急灯开关放在ON位,则供给应急灯的电源是:___
A. 应急灯由28VDCESSentialBus提供电源
B. 由应急灯由EPSUs提供电源
C. 应急灯由28VDCESSentialBus和EPSUs轮流提供电源
D. 应急灯由28VDCESSentialBus和EPSUs一起提供电源
推荐试题
【单选题】
A vSphere content library administrator is attempting to unpublish the content library, but the option is grayed out as shown in the Exhibit. Which statement identifies the reason for not being able to unpublish? ___
A. The content library is optimized for syncing over HTTP.
B. A synchronization operation is in progress with this content library.
C. There are active subscriptions on this content library.
D. Underlying storage for this content library is not accessible.
【单选题】
Assuming a mirrored (RAID-1) object configuration, how many hosts must contribute storage in a non-stretched VMware vSAN cluster to satisfy the “Number of failures to tolerate” policy option?“n” is the desired “Number of failures to tolerate” value for all options.___
A. 2n+2
B. 2n
C. 2n+1
D. 3n
【单选题】
An administrator must change the statistics level for short-term performance monitoring and wants to collect metrics for all counters, excluding minimum and maximum rollup values. What would be the statistics level?___
A. Level 3
B. Level 1
C. Level 2
D. Level 4
【单选题】
In a vSphere environment, two resource pools are created as shown in the Exhibit. Each VM is configured with 1 GB of memory. When the administrator tried to power on VM3, the operation failed. What action in the resource pool settings will allow VM3 to power on successfully?___
A. Deselect Expandable Memory Reservation
B. Increase Memory Reservation
C. Deselect Expandable CPU Reservation
D. Increase the CPU Reservation
【单选题】
Which network is used by vSphere HA when VMware vSAN is enabled?___
A. Management network
B. vSphere Replication network
C. vMotion network
D. VSAN network
【单选题】
Which statement is correct when migrating from a Windows vCenter Server to the vCenter Server Appliance 6.5?___
A. Migration deployments do not migrate local OS users from the source vCenter Server.
B. Migration deployments support DHCP on the source vCenter Server.
C. Migration deployments allow the source vCenter Server to remain powered on afterwards.
D. Migration deployments support custom ports for all services on the source vCenter Server.