【判断题】
抗战胜利初期,中国民主同盟主张“以民主的方式争取民主,以合法地行动争取合法的地位”,企图走第三条道路。
A. 对
B. 错
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
A
解析
暂无解析
相关试题
【判断题】
1946年1月政治协商会议决议虽不是新民主主义性质的,但在一个时期内,是否忠实履行它,是人民衡量政治是非的重要尺度。
A. 对
B. 错
【判断题】
从1946年到1949年,中国共产党领导中国人民解放军,经过战略防御、战略相持、战略反攻三个阶段,最后打败了国民党,取得了解放战争的胜利。
A. 对
B. 错
【判断题】
《中国土地法大纲》是中国共产党制定和颁布的第一个土地改革法令,为打败蒋介石、建立新中国的建立奠定了深厚的群众基础。
A. 对
B. 错
【判断题】
国统区第二条战线的形成,表明在不仅在军事战线上,而且在政治战线上,国民党都打了败仗。
A. 对
B. 错
【判断题】
抗战胜利后,一些民主党派领导人所主张的“中间路线”实质上就是资产阶级共和国方案,是旧民主主义的道路。
A. 对
B. 错
【判断题】
内战爆发后,客观形势决定了人民没有走中间路线的余地,原先主张走第三条道路的各党派都靠近了中国共产党,站到了新民主主义革命的立场上来。
A. 对
B. 错
【判断题】
1949年9月的召开的中国人民政治协商会议,是新中国的创建会议,《共同纲领》起着临时宪法的作用。
A. 对
B. 错
【判断题】
民主党派参加新政协并在新中国参政,标志着民主党派地位的根本变化,它们不再是在野党,成为了中国人民民主专政的参加者。
A. 对
B. 错
【判断题】
人民民主专政的新中国的创建,标志着近代以来中国面临的两大历史任务的基本完成。
A. 对
B. 错
【单选题】
A vSphere content library administrator is attempting to unpublish the content library, but the option is grayed out as shown in the Exhibit. Which statement identifies the reason for not being able to unpublish? ___
A. The content library is optimized for syncing over HTTP.
B. A synchronization operation is in progress with this content library.
C. There are active subscriptions on this content library.
D. Underlying storage for this content library is not accessible.
【单选题】
Assuming a mirrored (RAID-1) object configuration, how many hosts must contribute storage in a non-stretched VMware vSAN cluster to satisfy the “Number of failures to tolerate” policy option?“n” is the desired “Number of failures to tolerate” value for all options.___
A. 2n+2
B. 2n
C. 2n+1
D. 3n
【单选题】
An administrator must change the statistics level for short-term performance monitoring and wants to collect metrics for all counters, excluding minimum and maximum rollup values. What would be the statistics level?___
A. Level 3
B. Level 1
C. Level 2
D. Level 4
【单选题】
In a vSphere environment, two resource pools are created as shown in the Exhibit. Each VM is configured with 1 GB of memory. When the administrator tried to power on VM3, the operation failed. What action in the resource pool settings will allow VM3 to power on successfully?___
A. Deselect Expandable Memory Reservation
B. Increase Memory Reservation
C. Deselect Expandable CPU Reservation
D. Increase the CPU Reservation
【单选题】
Which network is used by vSphere HA when VMware vSAN is enabled?___
A. Management network
B. vSphere Replication network
C. vMotion network
D. VSAN network
【单选题】
Which statement is correct when migrating from a Windows vCenter Server to the vCenter Server Appliance 6.5?___
A. Migration deployments do not migrate local OS users from the source vCenter Server.
B. Migration deployments support DHCP on the source vCenter Server.
C. Migration deployments allow the source vCenter Server to remain powered on afterwards.
D. Migration deployments support custom ports for all services on the source vCenter Server.
【单选题】
How can failback of a recovered virtual machine in vSphere Replication be performed?___
A. No action required, because failback is automatically performed to the source site.
B. Configure a new replication in the reverse direction at the target site.
C. Disable or Stop the virtual machine replication on the source site.
D. Power off and unregister the virtual machine on the target site.
【单选题】
After upgrading the vSphere infrastructure and VMware Tools to version 6.5, the “Upgrade VM Compatibility” option is grayed out in the vSphere Web Client. (See Exhibit.) What must the administrator do to enable the VM compatibility upgrade?___
A. VMware Tools should be upgraded last.
B. Restart the ESXi server.
C. Uninstall VMware Tools.
D. Power off the virtual machine.
【单选题】
What availability mode does vCenter HA provide?___
A. Active-Passive
B. Active-Standby
C. Active-Active
D. Load-balanced
【单选题】
In which scenario will vSphere DRS balance resources when set to Fully Automated?___
A. Hosts with only shared storage
B. Hosts are part of a vSphere HA cluster
C. Power Management is set to Balanced on hosts
D. Hosts with shared or non-shared storage
【单选题】
What VMware technology can be used to move physical servers to the vSphere infrastructure?___
A. VMware vMotion
B. VMware Converter
C. VMware vCenter Server
D. OVF transport
【单选题】
Upgrading vCenter Server with Microsoft SQL database fails with the following error message: The DB User entered does not have the required permissions needed to install and configure vCenter Server with the selected DB. Please correct the following error(s): %sWhat could cause this error?___
A. incorrect ports open on SQL Server
B. incorrect database on the SQL server
C. incorrect compatibility mode on the SQL server
D. incorrect permission on SQL Server database
【单选题】
What is a potential downside of having more than four paths per datastore?___
A. limits the storage protocols
B. increases storage latency for VM
C. limits the path selection policies
D. limits the number of LUNs per host
【单选题】
Which feature facilitates the sharing of templates via vCenter Server?___
A. Content Library
B. OVF
C. folders
D. vApp
【单选题】
A vSphere Administrator is in the process of configuring replication for a virtual machine, but is not able to select the Recovery Point Objective (RPO) value of 5 minutes. Which statement could explain why the RPO value cannot be lower than 15 minutes?___
A. The OS quiescing option is selected for Replication options.
B. The virtual machine hardware version is not compatible.
C. The target and source sites use different types of datastores.
D. The target and source sites are not using VMFS 6.0 datastore.
【单选题】
What advanced parameter defines a custom isolation IP address for a vSphere HA cluster?___
A. das.usedefaultisolationaddress
B. das.isolationshutdowntimeout
C. fdm.isolationpolicydelaysec
D. das.isolationaddress
【单选题】
Which method is supported for backing up the virtual machine that contains vCenter Server?___
A. differential
B. incremental
C. full image
D. individual disks
【单选题】
A vSphere Administrator must ensure that a user is able to view and manage the system configuration in vSphere Web Client. In the vCenter Single Sign-On domain, which group should the user be a part of?___
A. SystemConfiguration.BashShellAdministrators
B. ComponentManager. Administrators
C. Administrators
D. SystemConfiguration.Administrators
【单选题】
What is the minimum number of hosts that must contribute capacity to a non-ROBO single site VMware vSAN cluster?___
A. 1
B. 64
C. 3
D. 2
【单选题】
Which guest operating system supports PVRDMA?___
A. Windows (32-Bit)
B. Linux (32-Bit)
C. Windows (64-Bit)
D. Linux (64-Bit)
【单选题】
What is the correct way to replace the certificate on an existing vCenter Server that is part of a vCenter HA configuration?___
A. Put the vCenter HA in Maintenance mode, replace the certificate, exit Maintenance mode.
B. Shut down Passive and Witness nodes and replace the certificate on the Active node.
C. Remove the Passive and Witness nodes, replace the certificate, reconfigure the cluster.
D. Replace the certificate while all nodes are participating in the cluster.
【单选题】
The vSphere Data Protection performance analysis results in the “Conditionally Passed” status. What can cause this condition?___
A. The results did not meet the minimum performance expectations.
B. The read, write, and seek tests were successful.
C. The read and write tests were successful but the seek test failed.
D. The read and write tests were successful but the seek test skipped.
【单选题】
A vSphere Administrator wants to reserve 0.5 Gbps for virtual machines on each uplink on a disturbed switch that has 10 uplinks. What is the quota that should be reserved for the network resource pool?___
A. 10 Gbps
B. 5 Gbps
C. 100 Gbps
D. 0.5 Gbps
【单选题】
A vSphere administrator manages a cluster which includes critical and non-critical virtual machines. The cluster requires different permissions for contractors and non-contractors. How can the administrator exclude the contractor group from some of the critical VMs?___
A. Apply permission for both contractors and non-contractors on the cluster level.
B. Apply permission for both contractors and non-contractors on the cluster level. Remove permission on the critical VMs for contractors.
C. Remove permission for contractors on the cluster level. Apply permission on the critical VMs for noncontractors.
D. Apply permission for both contractors and non-contractors on the VMs. Remove permission on the critical VMs for contractors.
【单选题】
In an ESXi 6.5 cluster only "NFS datastore has running or registered virtual machines" returns. A vSphere HA cluster with four hosts has admission control configured to tolerate one host failure. Which statement is true if a fifth host is added?___
A. CPU and Memory capacity will be set to 50%.
B. CPU and Memory capacity will be set to 30%.
C. CPU and Memory capacity will be set to 25%.
D. CPU and Memory capacity will be set to 20%.
【单选题】
Which command can be run to troubleshoot connectivity problems with vmkernal network interfaces?___
A. esxcli network
B. vmkping
C. net-status
D. vicfg-vmknic
【单选题】
What counter should an administrator check to determine if a virtual machine is ballooning?___
A. swapinRate
B. vmmemctltarget
C. swapped
D. vmmemctl
【单选题】
By default, how often is the vCenter vpx user password automatically changed?___
A. 15 days
B. 60 days
C. 30 days
D. 45 days
【单选题】
Which metric in the Exhibit would identify high latency for a virtual machine operating system?___
A. QAVG/cmd
B. KAVG/cmd
C. DAVG/cmd
D. GAVG/cmd
【单选题】
What VM Monitoring setting would ensure that the failure interval for a virtual machine is defined as 120 seconds?___
A. High
B. Normal
C. Low
D. Medium
【单选题】
The business managers have asked the IT administrator to ensure configuration compliance in the vSphere infrastructure. The IT administrator wants to use Host Profiles to accomplish this, but is unable to do so. Why is the administrator unable to use Host Profiles?___
A. The infrastructure uses a vSphere Standard license.
B. The infrastructure has servers with various CPU families.
C. The user has only the “Administrator” role.
D. Host Profiles apply only to storage settings.
推荐试题
【单选题】
SQL Server 是支持客户-服务器结构(C/S)的数据库管理系统,以下对于 C/S 结构描述不正确的是___。
A. 数据存储在客户机上,方便用户查询
B. 客户机负责系统与用户的交互和数据显示
C. C/S 结构是把整个数据处理的任务划分为在客户机上完成的任务和在服务器上完成的任务D.服务器负责数据的存储和管理
【单选题】
下列关于启动查询分析器叙述错误的是___ 。
A. 从企业管理器启动查询分析器,有时会显示登录对话框
B. 如果访问本地服务器,无论以哪种方式启动查询分析器,都不会显示登录对话框
C. 从 Windows “开始”菜单启动查询分析器时,肯定会显示登录对话框
D. 如果不登录到服务器,则不能在查询分析器中设计查询
【单选题】
根据不同的业务需求来建立数据模型,抽取最有意义的向量,决定选取哪种方法的数据 分析角色人员是___。
A. 研究科学家
B. 数据分析员
【单选题】
C.数据管理人员 D.软件开发工程师14271.___反映数据的精细化程度,越细化的数据,价值越高。
A. 颗粒度
B. 活性
C. 关联度
D. 规模
【单选题】
数据清洗的方法不包括___。
A. 重复数据记录处理
B. 噪声数据清除
C. 一致性检查
D. 缺失值处理
【单选题】
智慧城市的构建,不包含___。
A. 联网监控
B. 物联网
C. 数字城市
D. 云计算
【单选题】
大数据的最显著特征是___。
A. 数据规模大
B. 数据类型多样
C. 数据处理速度快
D. 数据价值密度高14277.软件需求规格说明的内容不包括( )。
【单选题】
C.用户界面及运行环境 D.软件的性能14278.面向对象的分析方法主要是建立三类模型,即___。
A. 对象模型、动态模型、功能模
B. 对象模型、动态模型、应用模型C.ER 模型、对象模型、功能模型 D.系统模型、ER 模型、应用模型
【单选题】
在 ER 模型中,包括以下基本成分___。
A. 实体、联系、属性
B. 控制、联系、对象
【单选题】
C.数据、对象、实体 D.实体、属性、操作14280.各种软件维护的类型中最重要的是___。
A. 完善性维护
B. 纠错性维护
C. 适应性维护
D. 预防性维护
【单选题】
若有一个计算类型的程序,它的输入量只有一个 X,其范围是[-2.0,2.0],现从输入的角度考虑一组测试用列-2.001,-2,20,2.001,设计这组测试用列的方法是___。
A. 边界值分析法
B. 等价分类法
C. 条件覆盖法
D. 错误推测法14282.下列白盒测试法,哪种是最强的覆盖准则(A)。A.条件组合覆盖 B.条件覆盖
【单选题】
确定测试计划是在___阶段制定的。
A. 总体设计
B. 详细设计
C. 编码
D. 测试
【单选题】
生命周期方法设计软件的过程中,画用例图属于___阶段的工作。
A. 需求分析
B. 概要设计
C. 详细设计
D. 软件维护
【单选题】
PDL 属于___语言。
A. 伪码
B. 高级程序设计语言
【单选题】
C.中级程序设计语言 D.低级程序设计语言14288. FMS 的管理控制系统必备软件模块中不包括___。
A. 网络模块
B. 系统管理程序模块
C. 接口模块
D. 调度模块
【单选题】
维护过程的本质是___的过程。
A. 压缩的修改软件定义和开发
B. 修改文档
C. 修改位置
D. 修改程序
【单选题】
RFID 卡(___可分为:有源(Active)标签和无源(Passive)标签。
A. 按供电方式分
B. 按工作频率分
C. 按通信方式分
D. 按标签芯片分
【单选题】
ZigBee___增加或者删除一个节点,节点位置发生变动,节点发生故障等等,网络都能够自我修复,并对网络拓扑结构进行相应的调整,无需人工干预,保证整个系统仍然能正常工作。
A. 自愈功能
B. 自组织功能
C. 碰撞避免机制
D. 数据传输机制
【单选题】
ZigBee(___无需人工干预,网络节点能够感知其他节点的存在,并确定连结关系,组成 结构化的网络。
A. 自组织功能
B. 自愈功能
C. 碰撞避免机制
D. 数据传输机制
【单选题】
ZigBee 采用了 CSMA-CA(___,同时为需要固定带宽的通信业务预留了专用时隙,避免了发送数据时的竞争和冲突;明晰的信道检测。
A. 碰撞避免机制
B. 自组织功能
C. 自愈功能
D. 数据传输机制
【单选题】
ZigBee 堆栈是在(___标准基础上建立的。
A. IEEE 802.15.4
B. IEEE 802.11.4
C. IEEE 802.12.4
D. IEEE 802.13.4
【填空题】
一、数控加工基础知识模块___
【填空题】
21001.___液压传动与机械传动相比传动比较平稳,故广泛应用于在要求传动平稳的机械上。
【填空题】
21002.___储气罐也可以分离压缩空气中的水分和油分。
【填空题】
21003.___气动执行元件可分为气缸、气动马达及一些特殊气缸。
【填空题】
21004.___机床标准坐标采用左手笛卡尔直角坐标系。
【填空题】
21005.___高速磨削加工特点是尽可能地提高切削速度、既可以用于精加工又可以用于粗加
【填空题】
21006.___超精密加工的支撑环境要求净化的空气环境、较好的抗震动干扰环境、恒定的稳
【填空题】
21007.___超精密加工包括了所有能使零件成形、位置和尺寸精度到微米和亚微米范围的机械加工方法。
【填空题】
21008.___激光束、离子束、电子束均可对工件表面进行改性。
【填空题】
21009.___超高速切削加工有色金属时,通常采用金刚石砂轮进行磨削。
【填空题】
21010.___超高速机床要求主轴的转速很高,但进给速度不需要提高。
【填空题】
21011.___人造金刚石是目前为止第二硬的刀具材料。
【填空题】
21012.___立方氮化硼是一种超硬材料,其硬度略低于人造金刚石,但不能以正常的切削速度切削淬火等硬度较高的材料。
【填空题】
21013.___涂层常用于硬质合金刀具,而不能用于高速钢刀具。
【填空题】
21014.___实践证明,涂层刀片在高速切削钢件和铸铁时能获得良好效果,比未涂层刀片的刀具寿命提高 1~3 倍,高者可达 5~10 倍。
【填空题】
21015.___工艺系统的热变形不仅影响加工精度,而且影响生产效率,为了保证加工要求必须使机床热平衡后再加工,使刀具热伸长后再调刀,使工件冷却后再测量及精加工。
【填空题】
21016.___高速切削是采用高转速、快进给、小被吃刀量和小进给量来去除材料的一种加工方式。
【填空题】
21017.___定义高速切削的依据是切削速度。
【填空题】
21018.___在高速切削加工范围,随着切削速度的提高,切削力减少。