【判断题】
钳工加工孔的方法一般指钻孔、扩孔和铰孔
A. 对
B. 错
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
A
解析
暂无解析
相关试题
【判断题】
一般情况下,孔加工刀具都应同时完成两个运动:主运动,即刀具绕轴线的旋转运动;进给运动,即刀具沿着轴线方向对着零件的直线运动
A. 对
B. 错
【判断题】
麻花钻是钻孔的主要刀具。麻花钻用低速钢制成,工作部分经热处理淬硬。麻花钻由钻柄、头部和工作部分组成
A. 对
B. 错
【判断题】
钻头颈部是磨削工作部分和钻柄时的退刀槽。钻头直径、材料、商标一般刻印在颈部
A. 对
B. 错
【判断题】
钻头导向部分经铣、磨或轧制形成两条对称的螺旋槽,用以排除切屑和输送切屑
A. 对
B. 错
【判断题】
钻孔钻削用量包括钻头的钻削速度或转速和进给量。钻削用量受到钻床功率、钻头强度、钻头耐用度和零件精度等许多因素的限制
A. 对
B. 错
【判断题】
钻孔前先用样冲在孔中心线上打出样冲眼,用钻尖对准样冲眼锪一个小坑,检查小坑与所划孔的圆周线是否同心(称试钻)
A. 对
B. 错
【判断题】
用扩孔钻或钻头扩大零件上原有的孔叫扩孔。孔径经钻孔、扩孔后,用铰刀对孔进行提高尺寸精度和表面质量的加工叫铰孔
A. 对
B. 错
【判断题】
攻螺纹是用丝锥加工出外螺纹
A. 对
B. 错
【判断题】
丝锥是加工小直径内螺纹的成形工具,它由切削部分,校准部分和柄部组成
A. 对
B. 错
【判断题】
丝锥切削部分和校准部分一般沿轴向开有 1~2条容屑槽以容纳切屑,并形成切削刃和前角γ 切削部分的锥面上铲磨出后角α
A. 对
B. 错
【判断题】
常用高碳优质工具钢或高速钢制造,手用丝锥一般用 T12A或 9SiCr制造
A. 对
B. 错
【判断题】
双手转动铰手,并横向加压力,当丝锥切入零件 1~2 牙时,用直尺检查丝锥是否歪斜,如丝锥歪斜,要纠正后再往下攻
A. 对
B. 错
【判断题】
当丝锥位置与螺纹底孔端面垂直后,轴向就不再加压力。两手均匀用力,为避免切屑堵塞,要经常倒转 1/2 圈~1/4 圈,以达到断屑的目的
A. 对
B. 错
【判断题】
攻螺纹是用板牙在圆杆上加工出外螺纹
A. 对
B. 错
【判断题】
板牙是加工外螺纹的工具。圆板牙就像一个圆螺母,不过上面钻有几个屑孔并形成切削刃
A. 对
B. 错
【判断题】
圆锥管螺纹板牙的基本结构与普通圆板牙一样,因为管螺纹有锥度,所以只在单面制成切削锥
A. 对
B. 错
【判断题】
套螺纹的方法:右手握住铰手的中间部分,加适当压力,左手将铰手的手柄顺时针方向转动,在板牙切入圆杆 2~3 牙时,应检查板牙是否歪斜,发现歪斜,应纠正后再套,当板牙位置正确后,再往下套就不加压力
A. 对
B. 错
【判断题】
焊接是指通过适当的物理化学过程如加热、加压或二者并用等方法,使两个或两个以上分离的物体产生原子(分子)间的结合力而连接成一体的连接方法,是金属加工的一种重要工艺
A. 对
B. 错
【判断题】
按照焊接过程和特点可将焊接分为熔焊、压焊、钎焊三大类
A. 对
B. 错
【判断题】
压焊是在焊接过程中,对焊件施加一定的阻力,同时采取加热或不加热的方式,完成零件连接的焊接方法
A. 对
B. 错
【判断题】
钎焊是利用熔点高于被焊金属的钎料,将零件和钎料加热到钎料熔化,利用钎料润湿母材,填充接头间隙并与母材相互溶解和扩散而实现连接的方法
A. 对
B. 错
【判断题】
电弧焊是利用电弧热源加热零件实现熔化焊接的方法
A. 对
B. 错
【判断题】
电弧焊应用广泛,可以焊接板厚从 0.1 mm 以下到数百毫米的金属结构件
A. 对
B. 错
【判断题】
焊接电弧是一种气体放电现象,当电源两端分别与被焊零件和焊枪相连时,在电场的作用下,电弧阴极产生电子发射,阳极吸收电子,电弧区的中性气体粒子在接受外界能量后电离成正离子和电子,正负带电粒子相向运动,形成两电极之间的气体空间导电过程,借助电弧将电能转换成热能、机械能和光能
A. 对
B. 错
【判断题】
焊接电弧具有温度高的特点,电弧弧柱温度范围为 5000 K~30000 K
A. 对
B. 错
【判断题】
焊接电弧具有电弧电流大的特点,范围为 1A~10 A
A. 对
B. 错
【判断题】
焊接电弧具有电弧电弧电压低,范围为 10 V~80 V
A. 对
B. 错
【判断题】
采用直流电流焊接时,当零件接电源输出正极,焊枪接电源输出负极时,称直流正接或正极性;反之,则为直流反接或反极性。交流焊接无电源极性问题
A. 对
B. 错
【判断题】
焊条电弧焊是用手工操纵焊条进行焊接的一种方法,俗称手弧焊,应用非常普遍
A. 对
B. 错
【判断题】
焊条电弧焊也存在缺点,如生产率低,产品质量一定程度上取决于焊工操作技术,焊工劳动强度大等
A. 对
B. 错
【判断题】
焊条电弧焊所用的焊接材料是焊条,焊条主要由焊芯和焊渣两部分组成
A. 对
B. 错
【判断题】
焊接时,焊芯有两个功能:一是传导焊接电流,产生电弧;二是焊芯本身熔化作为填充金属与熔化的母材熔合形成焊缝
A. 对
B. 错
【判断题】
焊条药皮的组成主要有稳弧剂、造气剂、造渣剂、脱氧剂、合金剂、粘接剂和增塑剂等
A. 对
B. 错
【判断题】
焊条分结构钢焊条、耐热钢焊条、不锈钢焊条、铸铁焊条等十大类。根据其药芯组成又分为酸性焊条和碱性焊条
A. 对
B. 错
【判断题】
碱性焊条电弧稳定,焊缝成形美观,焊条的工艺性能好,可用交流或直流电源施焊
A. 对
B. 错
【判断题】
酸性焊条多为低氢型焊条,所得焊缝冲击韧度高,力学性能好,但电弧稳定性比碱性焊条差
A. 对
B. 错
【判断题】
焊接电弧的建立称引弧,焊条电弧焊有两种引弧方式:划擦法和直击法
A. 对
B. 错
【判断题】
划擦法操作是在焊机电源开启后,将焊条末端对准焊缝,并保持两者的距离在 15 cm以内,依靠手腕的转动,使焊条在零件表面轻划一下,并立即提起 2 mm~4 mm,电弧引燃,然后开始正常焊接
A. 对
B. 错
【判断题】
直击法是在焊机开启后,先将焊条末端对准焊缝,然后稍点一下手腕,使焊条轻轻撞击零件,随即提起 2 mm~4 mm,就能使电弧引燃,开始焊接
A. 对
B. 错
【判断题】
焊缝的起头是指焊缝起焊时的操作,应该在引弧后将电弧稍微拉长,对零件起焊部位进行适当预热,并且多次往复运条,达到所需要的熔深和熔宽后再调到正常的弧长进行焊接
A. 对
B. 错
推荐试题
【多选题】
Which two statements are true for Predictive DRS? (Choose two.)___
A. It balances resource utilization for virtual machines with unpredictable utilization patterns.
B. It integrates DRS with vRealize Operations Manager to balance workloads for virtual machines before resource utilization spikes occur.
C. It balances resource utilization based on a threshold's algorithm that runs each night.
D. It determines the best placement and balance of virtual machines based on a threshold's algorithm that runs each night in vCenter Server 6.5 Database.
【多选题】
Which two situations could cause a virtual machine to appear with (orphaned) appended to its name? (Choose two.)___
A. if a host failover is unsuccessful
B. if a virtual machine was removed from vCenter Server's inventory
C. if a virtual machine was deployed from template, and the template has been deleted
D. if a virtual machine is unregistered directly on the host
【多选题】
Which three requirements are needed to apply RAID 5 or RAID 6 erasure coding on a vSAN 6.2 or 6.5 object? (Choose three.)___
A. on Disk Format 3.0
B. Hybrid vSAN
C. All Flash vSAN
D. vSAN Advanced License
E. Stretched Cluster Configurations
【多选题】
An administrator sees the following error in the log files: Which two events could be the source of the error message? (Choose two.)___
A. vCenter Server failure
B. VXLAN failure
C. Disk array failure
D. Network failure
E. ESXi host failure
【多选题】
An administrator is attempting to access an ESXi host via the DCUI but is unable to do so. Which could be two possible causes? (Choose two.)___
A. The host in Qhas no out-of-band management capability (i.e. iLO/iDRAC).
B. The SSH service is disabled on the host.
C. Strict lockdown mode is enabled on the host.
D. Normal lockdown mode is enabled and the administrator is a member of the
E. xception User list.
【多选题】
Which two permissions are required to migrate a virtual machine with Storage vMotion? (Choose two.)___
A. Network > Move Network
B. Virtual Machine > Inventory > Move
C. Resource > Migrate powered on virtual machine
D. Datastore > Allocate Space
【多选题】
Which are three supported storage requirements for vCenter Server HA? (Choose three.)___
A. NFS
B. RDM
C. vSAN
D. VMFS
E. JBOD
【多选题】
Which are the two network requirements for a VMware vSAN 6.5 cluster? (Choose two.)___
A. Multicast must be enabled on the physical switches and routers that handle vSAN traffic.
B. vSAN requires IPv6 only.
C. All hosts must have a dedicated 40GbE NIC.
D. The vSAN network supported IPv4 or IPv6.
E. vSAN requires IPv4 only.
【多选题】
Which three prerequisites must be in place prior to enabling secure boot for a virtual machine? (Choose three.)___
A. VirtualMachine.Config.Settings privileges
B. an encrypted USB drive
C. Virtual Hardware version 13 or later
D. Virtual Hardware version 12 or later
E. EFI firmware
【多选题】
A user is given the "Virtual machine user (sample)" role in a vSphere 6.x environment. Which three permissions would the user be able to perform? (Choose three.)___
A. Reset a virtual machine.
B. Power on a virtual machine.
C. Move a host into a cluster.
D. Configure CD media.
E. Migrate a virtual machine with Storage vMotion.
【多选题】
Which three are supported upgrade processes for ESXi host? (Choose three.)___
A. using vSphere Auto Deploy
B. using a TFTP server
C. using Update Manager
D. using an
E. SXCLI command
【多选题】
When enabling Storage DRS on a datastore cluster, which three components are enabled as a result? (Choose three.)___
A. Space load balancing among datastore within the datastore cluster.
B. Initial placement for virtual disks based on space and I/O workload.
C. I/O load balancing among datastores within the datastore cluster.
D. Queue Depth alerting on disks within the datastore cluster.
E. Data de-duplication within the datastore cluster.
【多选题】
What are two features introduced in Network I/O Control version 3? (Choose two.)___
A. Bandwidth reservation per traffic type
B. Network resource pools
C. CoS tagging
D. Bandwidth guarantee to virtual machines
【多选题】
Which two correct virtual machine advanced configuration parameters will accomplish this? (Choose two.)___
A. isolation.device.edit.disable = “FALSE”
B. isolation.device.edit.disable = “TRUE”
C. isolation.device.connectable.disable = “FALSE”
D. isolation.device.connectable.disable = “TRUE”
【多选题】
Which three statements are correct regarding booting an ESXi Host from Fibre Channel SAN? (Choose three.)___
A. Direct connect topology is supported.
B. Each host must have its own boot LUN.
C. ESXi hosts do not require local storage.
D. Multipathing to a boot LUN on an active-passive array is supported.
E. Hosts can share one common boot LUN.
【多选题】
Which two tasks should a vSphere administrator perform if the vmkernel log reports VMFS metadata errors? (Choose two.)___
A. contact VMware technical support
B. reformat the datastore
C. check the device with VOMA
D. ignore the messages
【多选题】
Which two statements are true for a vCenterServer user account that is used for vSphere Data Protection (VDP)? (Choose two.)___
A. The user account must be assigned with Administrator role.
B. The password for the user account cannot contain spaces.
C. The user account should be created in the Single Sign-On domain
D. The user account cannot inherit required permissions from a group role.
【多选题】
Which three storage protocols are supported by Virtual Volumes? (Choose three.)___
A. FCIP
B. FCoE
C. iSCSI
D. NFS v3
E. NFS v4
【多选题】
A vSphere administrator observes a CPU spike on one of the web servers (view the Exhibit.) Which two statements can describe the cause of this activity? (Choose two.)___
A. The network packet size is too large.
B. VMware Tools is not installed.
C. Disk latency is present on the datastore.
D. The network packet size is too small.
【多选题】
Which three operations can cause VMFS metadata updates? (Choose three.)___
A. Restarting a VM using the guest OS.
B. Launching a VM console.
C. Migrating a VM with vMotion.
D. Powering a VM on or off.
E. Expanding a VMFS datastore.
【多选题】
*What two services run on all nodes in a vCenter Server HA cluster? (Choose two.)___
A. vmware-vmon
B. vmware-vpostgres
C. vmare-rbd-watchdog
D. vmware-vcha
【多选题】
Which two statements are true regarding Auto Deploy in version 6.5? (Choose two.)___
A. Auto Deploy can be configured and managed via PowerCLI.
B. Auto Deploy can be configured and managed via the vSphere Client.
C. Auto
D. eploy can be configured and managed via the vSphere Web Client.
【多选题】
What three options can improve network performance for a virtual machine? (Choose three.)___
A. MLD
B. TSO
C. NetFlow
D. LRO
E. SR-IOV
【多选题】
Which two storage technologies are supported for MSCS? (Choose two.)___
A. NFS
B. VAAI
C. iSCSI
D. FC
【多选题】
When upgrading a VMware vSAN cluster to version 6.5, which two tasks must be completed to comply with upgrade requirements and VMware-recommended best practices? (Choose two.)___
A. Use RVC to upgrade the hosts.
B. Use the latest available ESXi version.
C. Back up all VMs.
D. Use only the “Full data migration” maintenance mode option.
【多选题】
What two enhancements are in VMFS6 but not in VMFS5? (Choose two.)___
A. Support for 4k native disks
B. Support for 512e disks
C. GPT storage device partitioning
D. Automatic space reclamation
【多选题】
Which two statements describe why a vSphere DRS cluster would report load imbalance? (Choose two.)___
A. The configured migration threshold is too high.
B. The configured migration threshold is too low.
C. DRS is configured for Partially Automated.
D. Enhanced vMotion Compatibility (EVC) is enabled.
【多选题】
A vSphere Administrator must ensure that vCenter Server service is running in a domain user account rather than Local System Account. To accomplish this, the user account should have which two permissions? (Choose two.)___
A. Log on as a service.
B. Act as part of the operating system.
C. Log on as a batch job.
D. Log on locally.
【多选题】
A virtual machine fails to power on after being deployed from a template. What two remediation steps could correct this issue? (Choose two.)___
A. Increase CPU reservation
B. Decrease memory reservation
C. Increase memory reservation
D. Increase datastore capacity
E. Decrease CPU reservation
【多选题】
Which three directories are available under the vcsa-cli-installer folder of the vCenter Server Appliance installation media? (Choose three.)___
A. \mac
B. \ovftool
C. \migration-assistant
D. \win32
E. \lin64
【多选题】
What are three considerations when booting ESXihost from SAN software FCoE? (Choose three.)___
A. The VMware_FCoE_vSwitch that the installer automatically created cannot be changed.
B. Boot LUN cannot be shared with other hosts even on shared storage.
C. Multipathing is not supported at pre-boot.
D. Software FCoE boot configuration cannot be changed from within
E. SXi.
【多选题】
Which two choices are applicable to vSphere Availability? (Choose two.)___
A. Heartbeat Datastores
B. VM Startup/Shutdoown
C. Power Management
D. Admission Control
【多选题】
A user is a member of groups A and B. -VM10 and VM20 are in VM Folder. -Group A is assigned permission “Read-only” on VM Folder. What two configurations will allow the user to edit the settings for only VM10? (Choose two.)___
A. Assign group B permission “virtual machine power user” to VM10.
B. Assign group B permission “virtual machine console user” to VM10.
C. Assign group A permission “virtual machine console user” to VM10.
D. Assign group A permission “virtual machine power user” to VM10.
【多选题】
Which two new vSphere 6.5 features enable an Administrator to locate configuration options when creating or editing host profiles more easily than in previous versions? (Choose two.)___
A. Add the configuration option to favorites.
B. Navigate the option tree.
C. Search for the configuration option.
D. Copy the configuration option from a different profile.
【多选题】
What are the two valid storage controller types for VMs on ESXi 6.5? (Choose two.)___
A. FCoE
B. SATA
C. NVMe
D. iSCSI
【多选题】
Which two options can optimize conversion with VMware Converter? (Choose two.)___
A. Disable real-time antivirus scanners.
B. Remove the source from Active Directory.
C. Remove third-party device drivers.
D. Exclude diagnostic partitions from conversion.
E. Disable Volume Shadow Copy (VSS).
【多选题】
vSphere Availability considers which two factors for virtual machine restarts? (Choose two.)___
A. Host Isolation Response
B. file accessibility
C. NUMA node size
D. resource reservations
【多选题】
Which two virtual NICs support Wake-on-Lan to resume a virtual machine that is in standby mode? (Choose two)___
A. Flexible
B. E1000E
C. E1000
D. vmxnet 3
【多选题】
Which two logs should be examined to troubleshoot a Windows vCenter Server upgrade failure? (Choose two.)___
A. vminst.log
B. vim-um-msi.log
C. firstboot.log
D. pkgmgr.log
【多选题】
Which are two supported storage primitives for VAAI NAS? (Choose two.)___
A. Full File Clone
B. Reserve Space
C. hardware assisted locking
D. block zeroing