【单选题】
当DFDR故障时,说法正确的是()___
A. 主警告灯亮,连续重复的谐音响
B. 主警告灯亮,单谐音
C. 仅有ECAM警告信息
D. 相应的SD页面被显示
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
C
解析
暂无解析
相关试题
【单选题】
当ECAMCP上的“ALL”被压下时,()___
A. 所有系统页面以1秒为间隔依次显示
B. 所有系统页面以1分为间隔依次显示
C. 只显示一些主要的系统页面
D. 以上都不对
【单选题】
当EWD显示失效后,EWD的参数会自动在以下哪个显示组件上显示()___
A. PFD1
B. ND1
C. SD
D. ND2
【单选题】
当PFD1显示失效后,PFD1的参数会自动在以下哪个显示组件上显示()___
A. ND2
B. ND1
C. EWD
D. SD
【单选题】
当PFR打印无效时()___
A. 无法获得相应的ECAM警告和故障信息
B. 无法获得“源”和“识别”信息
C. 通过MCDU只能获得故障信息
D. 可以通过MCDU获得相应的PFR信息
【单选题】
当飞机正常电源丢失后,时钟会()___
A. 不工作
B. 仍正常工作
C. 飞机电瓶提供内部计时
D. 靠静变流机提供显示
【单选题】
当时钟设置正确时,例如18:05:42时,秒的显示在时钟上显示为()___
A. 空白
B. 一个横杠
C. 二个横杠
D. 三个横杠
【单选题】
当一部FWC故障时,下列说法正确的是()___
A. 机长和副驾驶的主警告和主警戒灯只提供一半显示
B. 没有影响
C. 只是影响音响警告
D. 不能提供飞行阶段的计算
【单选题】
当一台发动机启动后,SD自动显示哪个页面()___
A. 巡航页面
B. 电源页面
C. 发动机页面
D. 机轮页面
【单选题】
当主时钟失效时,CFDIU通过哪个部件向外输出时间/日期()___
A. FMGC
B. FAC
C. CFDIU的内部时钟
D. MCDU输出的时间/日期
【单选题】
电子设备状态中不包括以下哪类信息()___
A. 1级故障
B. 2级故障
C. 3级故障
D. 导航数据
【单选题】
电子仪表系统总共包括几个显示组件()___
A. 4个
B. 2个
C. 5个
D. 6个
【单选题】
发动机燃油流量在以下哪种显示器上显示()___
A. SD
B. PFD
C. ND
D. EWD
【单选题】
飞行阶段的计算由以下哪个计算机完成()___
A. DMC1,2,3
B. FWC1,2
C. SDAC1,2
D. FMGC1
【单选题】
飞机的航向带显示在PFD的()___
A. 右边
B. 左边
C. 下部
D. 上部
【单选题】
飞机起飞后,以下哪类故障不发送至CFDIU中()___
A. 主故障
B. 独立故障
C. 次级故障
D. 娱乐系统故障
【单选题】
飞机上故障分为几级()___
A. 2
B. 3
C. 4
D. 5
【单选题】
飞机上驾驶舱有几个时钟()___
A. 0个
B. 1个
C. 2个
D. 3个
【单选题】
飞机上时钟安装在驾驶舱什么位置()___
A. 主仪表板左下方
B. 主仪表板右下方
C. 遮光板左下方
D. 遮光板右下方
【单选题】
飞机速度带显示在PFD的()___
A. 右边
B. 左边
C. 中央
D. 上部
【单选题】
飞机在1500ft时,如1发IDG故障,SD显示()___
A. 机轮页面
B. 巡航页面
C. 发动机页面
D. 电源页面
【单选题】
飞机在1500ft以上时,如ELAC1失效,SD显示()___
A. 机轮页面
B. 巡航页面
C. 发动机页面
D. 飞行控制页面
【单选题】
飞机在正常状态下,SD在以下哪个飞行阶段出现巡航页面()___
A. 03
B. 04
C. 05
D. 06
【单选题】
飞机着陆后,发动机关车前,SD正常显示()___
A. 机轮页面
B. 巡航页面
C. 发动机页面
D. 门页面
【单选题】
飞机正常状态下,SD在以下哪几个飞行阶段中显示发动机页面()___
A. 03,04
B. 03,04,05
C. 04,05,06,07
D. 04,05
【单选题】
风速、风向参数通常在哪个显示组件上显示()___
A. PFD
B. ND
C. EWD
D. SD
【单选题】
关于III类系统以下哪种叙述是正确的()___
A. III类系统不能记忆故障信息
B. III类通过ARINC429总线与CFDS相连
C. III类在PRF上能看到
D. A+B+C
【单选题】
关于3级故障以下哪种说法是正确的()___
A. 不会出现在PFR上
B. 最严重的故障
C. 需立即处理
D. 可永不处理
【单选题】
关于Ⅰ级故障的处理以下哪种叙述是正确的()___
A. 不需处理就能放行
B. 不能放行
C. 参考MEL进行放行,不放行,有条件放行
D. Ⅰ级故障可保留到定检处理
【单选题】
关于Ⅱ级故障的处理,以下哪种叙述是正确的()___
A. 不能放行
B. 10日内必须处理
C. 选择适当时机处理
D. 永远不需处理
【单选题】
关于CFDIU正常通道的叙述以下哪种是正确的()___
A. 保证所有CFDIU的功能
B. 完成CFDIU的部分测试功能
C. 处于热备用状态
D. 不使用
【单选题】
关于DFDR哪种说法是错误的()___
A. DFDR在地面可以通过地面控制电门供电
B. DFDR直接从系统计算机获得信号并记录
C. DFDR记录的参数与QAR记录参数一致
D. DFDR在空中一直被供电
【单选题】
关于DFDR说法正确的是()___
A. DFDR只能在空中工作
B. DFDR只能在地面工作
C. DFDR在空中不工作,但可以通过超控电门使其工作
D. DFDR在地面不工作,但可以通过超控电门使其工作
【单选题】
关于ECAMCP上的“CLR”键说法正确的是()___
A. 只要警告/警戒信息或状态信息出现ECAMDU时,“CLR“键亮
B. 压下会使ECAM显示信息
C. 使取消的警告/警戒恢复
D. A+B
【单选题】
关于FDIU的输出哪种说法是正确的()___
A. FDIU同时输出信号到QAR和DFDR
B. FDIU只能输出信号到QAR,不输出到DFDR
C. FDIU只能输出信号到DFDR,不输出到QAR
D. FDIU不直接向CFDIU输出信号
【单选题】
关于FDIU的输入下列哪种说法是错误的()___
A. FDIU直接从各种计算机获得信号
B. FDIU通过SDAC从各种计算机获得信号
C. FDIU通过SDAC获得LA信号
D. FDIU不直接从LA获得信号
【单选题】
关于III级故障的处理,以下哪种叙述是正确的()___
A. 不能放行
B. 10日内必须处理
C. 选择适当时机处理
D. 永远不需处理
【单选题】
关于ULB,哪种说法是错误的()___
A. ULB采用电池供电
B. ULB在地面总是工作
C. ULB只在水下工作
D. ULB安装在DFDR上
【单选题】
关于航后报告的过滤器说法正确的是()___
A. 始终起作用
B. 仅激活后起作用
C. 不能失效或被抑制
D. 不能更改
【单选题】
关于系统测试的叙述以下哪种是正确的()___
A. 通电测试比系统测试更完整
B. 系统测试等同于通电测试
C. 系统测试比通电测试更完整
D. 系统测试只能对系统测试,不能测试相关子系统
【单选题】
关于巡航页面,下列叙述正确的是()___
A. 可以在地面维护时显示
B. 在巡航时发生系统故障后显示
C. 直到发动机关车后消失
D. 没有相应的选择按钮
推荐试题
【单选题】
Which command can be run to troubleshoot connectivity problems with vmkernal network interfaces?___
A. esxcli network
B. vmkping
C. net-status
D. vicfg-vmknic
【单选题】
What counter should an administrator check to determine if a virtual machine is ballooning?___
A. swapinRate
B. vmmemctltarget
C. swapped
D. vmmemctl
【单选题】
By default, how often is the vCenter vpx user password automatically changed?___
A. 15 days
B. 60 days
C. 30 days
D. 45 days
【单选题】
Which metric in the Exhibit would identify high latency for a virtual machine operating system?___
A. QAVG/cmd
B. KAVG/cmd
C. DAVG/cmd
D. GAVG/cmd
【单选题】
What VM Monitoring setting would ensure that the failure interval for a virtual machine is defined as 120 seconds?___
A. High
B. Normal
C. Low
D. Medium
【单选题】
The business managers have asked the IT administrator to ensure configuration compliance in the vSphere infrastructure. The IT administrator wants to use Host Profiles to accomplish this, but is unable to do so. Why is the administrator unable to use Host Profiles?___
A. The infrastructure uses a vSphere Standard license.
B. The infrastructure has servers with various CPU families.
C. The user has only the “Administrator” role.
D. Host Profiles apply only to storage settings.
【单选题】
What is the result of a “Consolidate” action on a virtual machine?___
A. All snapshots on the virtual machines will be deleted.
B. The virtual machine will be reverted to its last snapshot.
C. Redundant delta disks will be combined and deleted.
D. A new snapshot with memory state will be created.
【单选题】
A Telco customer is implementing NFV using vSphere as the virtualization platform. Which feature can help achieve a high packet rate with lower CPU consumption?___
A. Network I/O Control
B. SplitRX
C. ERSPAN
D. LACP
【单选题】
What is the VMware-recommended best practice for Fibre Channel zoning?___
A. soft zoning
B. single-initiator-multiple-target zoning
C. single-initiator zoning
D. single-initiator-single-target zoning
【单选题】
How can a vSphere administrator ensure that a set of virtual machines run on different hosts in a DRS cluster?___
A. Use a VM-Host affinity rule.
B. Add the VMs to a vApp.
C. Use a VM-VM affinity rule.
D. Place the VMs in different folders.
【单选题】
vCenter Server Appliance Instance can be backed up using which Client Interface?___
A. vSphere Client Interface
B. vSphere Web Client Interface
C. VMware Host Client Interface
D. Virtual Appliance Management Interface
【单选题】
What tool can capture network traffic at the uplinks, or vSwitch, or virtual port levels?___
A. tcpdump-uw
B. wireshark
C. pktcap-uw
D. pcap
【单选题】
Which storage feature always requires the use of third-party software on ESXi?___
A. Hardware Acceleration for NAS devices
B. VVOL
C. Hardware Acceleration for Block
D. evices
【单选题】
An ESXi host's VMCA-Signed certificate has expired. How can the certificate be renewed?___
A. In the vSphere Web Client, browse to the host in question. Click the Manage tab and select settings. Select System and click Certificate, then click the Renew button.
B. In the vSphere Web Client, browse to the host in question. Click the Manage tab and select settings. Select System and click Certificate, then click the Refresh CA Certificates button.
C. Run the command /sbin/generate-certificates on the affected host.
D. Disconnect the host from vCenter Server and reconnect it.
【单选题】
Which is the correct order for upgrading vSphere components?___
A. vCenter Server, ESXi hosts, VMware Tools, Virtual Machine hardware
B. VMware Tools, Virtual Machine hardware, ESXi hosts, vCenter Server
C. vCenter Server, Virtual Machine hardware, VMware tools, ESXi hosts
D. ESXi hosts, vCenter Server, Virtual Machine hardware, VMware Tools
【单选题】
Which iSCSI initiator type can be used with any network interface card?___
A. Software iSCSI initiator
B. Software FCoE adapter
C. Hardware Independent iSCSI initiator
D. Hardware Dependent iSCSI initiator
【单选题】
An administrator is attempting to power on a virtual machine with 32GB of memory. The operation fails with the following error: <Could not power on VM: No space left on device> <Checking the space on the virtual machine's datastore, there is 30GB free.> Which action would allow the VM to power on?___
A. Set a 2GB memory reservation on the VM.
B. Mount the virtual disk from the affected VM on to another virtual machine and free up space from within the OS.
C. Enable vSphere HD admission control on the cluster in which the VM resides.
D. Set a 2GB memory limit on the VM.
【单选题】
An administrator attempts to manually reclaim space on thin-provisioned VMFS6 volumes but finds that no additional space is being recovered. Which could be causing this?___
A. vSphere 6.5 does not support manual UNMAP.
B. The manual UNMAP operation has been moved to the vSphere web client.
C. The VASA version is use is incompatible.
D. UNMAP is automated for VMFS6.
【单选题】
An administrator has upgraded to vSphere 6.5 and also wants to use Kerberos authentication for NFS. Which can be done to the existing NFSv3 volumes to enable this feature?___
A. Perform a storage rescan on VMFS volumes.
B. Unmount the NFSv3 datastore, and then mount as NFSv4.1 datastore.
C. Nothing. All NFSv3 mounted datastores are upgraded automatically during vSphere upgrades.
D. Perform a scan of new storage devices.
【单选题】
An administrator wants to restore the vCenter Server Appliance 6.5 from backup. Where can this be accomplished?___
A. from the ESXi Host Client
B. from the VMware vSphere Appliance Management Interface
C. from within the VMware vSphere Web Client
D. from the vCenter Server Appliance Installer
【单选题】
The administrator wants to power on VM-K2, which has a 2GHz CPU reservation. VM-M1, VM-M2, and VM-K1 are all powered on. VM-K2 is not powered on. The exhibit shows the parent and child resource reservations. If Resource Pool RP-KID is configured with an expandable reservation, which statement is true?___
A. VM-K2 will be unable to power on because there are insufficient resources.
B. VM-K2 will be able to power on since resource pool RP-KID has 2GHz available.
C. VM-K2 will be unable to power on because only 2GHz are reserved for RP-KID.
D. VM-K2 will receive resource priority and will be able to power on this scenario.
【单选题】
Which is the block size on the VMFS6 datastore?___
A. All small and large file blocks are 8MB.
B. All small and large file blocks are 1MB.
C. Small file blocks are 512KB. large file blocks are 64MB.
D. Small file blocks are 1MB, large file blocks are 512MB.
【单选题】
When installing vCenter Converter Standalone, why must an administrator perform a client-server installation instead of a local installation?___
A. to manage conversion tasks remotely
B. to convert virtual machines as well as physical machines
C. to allow installation of the Converter agent on remote source machines
D. to hot clone physical or virtual machines
【单选题】
Which is required by vCenter Converter Standalone to convert a physical Red Hat Enterprise Linux 7 machine to a virtual machine?___
A. The Linux machine must be powered off.
B. The Linux machine must have the SSH daemon started.
C. The Linux machine must use a static IP address.
D. The Linux machine must have a fully-qualified domain name.
【单选题】
An administrator is troubleshooting network communications between a vCenter Server and an ESXi 6.5 host. Which log shows the related events between these components?___
A. /var/log/fdm.log
B. /var/log/vpxa.log
C. /var/log/hostd.log
D. /var/log/auth.log
【单选题】
An administrator has recently upgraded from vSphere 6.0 to 6.5, and can no longer see the software iSCSI named vmhba33. Which could be the reason for this?___
A. The upgrade has changed the vmhba name.
B. vSphere 6.5 automates iSCSI configurations.
C. vSphere 6.5 no longer supports software iSCSI.
D. The upgrade has deleted the vmhba.
【单选题】
An administrator is trying to vMotion a VM from his datacenter to a recovery site. Which is the maximum allowed RTT (Round-Trip Time) latency between source and destination host?___
A. 100 milliseconds
B. 150 milliseconds
C. 15 milliseconds
D. 10 milliseconds
【单选题】
Which is required for configuring iSCSI Software Adapter network port binding?___
A. VMkernel of the iSCSI traffic must be load balanced using Route based on IP Hash algorithm.
B. VMkernel of the iSCSI traffic must be load balanced using Route based on Source Virtual Port ID algorithm.
C. VMkernel of the iSCSI traffic must be load balanced using Route based on Source MAC Hash algorithm.
D. VMkernel of the iSCSI traffic must be bound to only one active network adapter.
【单选题】
In vSphere Data Protection 6.1, which is the function of a Backup Verification job?___
A. None. Backup Verification job is not a feature of vSphere Data Protection
B. It is a manual task -Power it on -Verify the guest OS -Check started applications
C. It is an automatic process -Restore a virtual machine -Power it on -Verify that the guest OS is booted by communicating with the Backup Verification agent
D. It is an automatic process -Restore a virtual machine -Power it on -Verify that the guest OC is booted by detecting the VMware ToolsTM "heartbeats"
【单选题】
An administrator has enabled vSphere Distributed Switch Health Check. The hosts connected to that Distributed Switch all display an alert:< vSphere Distributed Switch MTU supported status > .The administrator has all of the VMkernel ports MTU sizes set to 1600. Which action will remedy this problem?___
A. Configure the Distributed Switch to MTU 9100.
B. Disconnect and reconnect the physical network cable.
C. Configure the physical switch to MTU 1600.
D. Disable the Distributed Switch MTU.
【单选题】
Which Host Profile Subprofile configuration is used to configure firewall settings for ESXi hosts?___
A. Advanced Configuration Settings
B. General System Settings
C. Security
D. Networking
【单选题】
Where would a vSphere administrator find general vCenter Server logs on a vCenter Server Appliance?___
A. /var/log/vmware/vpxd/
B. /var/log/messages
C. /etc/vmware-vpx/
D. /var/log/vmware/vsan-health/
【单选题】
An administrator wishes to enable network port mirroring based on source port. Which feature should be enabled?___
A. vSphere standard switch port
B. ERSPAN
C. NSX Virtual Wire
D. VLAN
【单选题】
Which CLI command shows the physical uplink status for a vmnic?___
A. esxcli network ip connection list
B. esxcli network ip neighbor list
C. esxcli network nic get
D. esxcli network nic list
【单选题】
Which is the maximum number of block devices (LUNs) that are supported by ESXi hosts that are running version 6.5?___
A. 1024
B. 512
C. 2048
D. 256
【单选题】
When performing a vCenter Server 5.5 for Windows with Microsoft SQL Server Express database migration to vCenter Server Appliance 6.5, which will be the target database?___
A. Microsoft SQL Server Express 2012R2
B. Microsoft SQL Server Standard 2012R2
C. PostgreSQL
D. Oracle DB 11g
【单选题】
An administrator has multiple vCenter Server 6.5 systems but cannot enable Storage I/O Control (SIOC) on a datastore shared by ESXi hosts managed by the vCenter Server systems. Which action should the administrator take to resolve the issue?___
A. Unmount the datastore and then enable SIOC on the vCenter Server system.
B. Configure the datastore to be managed by a single vCenter Server system.
C. Configure Storage DRS and then enable SIOC on the vCenter Server system.
D. Enable Raw Device Mapping (RDM) on the
E. SXi hosts.
【单选题】
“OneAppServer” is a VM template stored in a content library named “LibraryOne”, but the vSphere administrator is not able to use this template for deployment. Why is the administrator unable to deploy OneAppServer?___
A. OneAppServer must be updated before it can be deployed.
B. LibraryOne is a subscribed library and OneAppServer is not downloaded yet.
C. LibraryOne is published and optimized for syncing over HTTP.
D. OneAppServer was imported from a local file on the system.
【单选题】
An administrator sets the Failover Capacity for both CPU and Memory at 25%. Based on the Exhibit below, how much of the cluster’s total CPU resources are still available to power on additional virtual machines?___
A. 45%
B. 25%
C. 70%
D. 60%
【单选题】
Which statement applies to the vSphere Replication appliance?___
A. Only one vSphere Replication appliance can be deployed per vCenter Server instance.
B. VMware Tools in the vSphere Replication appliance can be upgraded.
C. A single vSphere Replication appliance can manage a maximum of 4000 replications.
D. vSphere Replication is available only with the vSphere
E. ssentials Plus license.