【单选题】
当座舱高度达到多少时,将会触发座舱高度过高警告?___
A. 8800英尺;
B. 9550英尺;
C. 10000英尺。
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
B
解析
暂无解析
相关试题
【单选题】
空调系统安全活门的作用是?___
A. A.防止反压超压
B. B.代替外流活门
C. C.防止正,反压超压
D. D.组件失效时给客舱供气
【单选题】
有关外流活门错误的是?___
A. A.应急冲压门开且客舱内外压差<1PSI时,外流活门半开
B. B.当外流活门采用人工方式时,按DITCHING电门不能将它关闭
C. C.当外流活门采用人工方式时,将MANV/S电门扳到UP位并保持,外流活门将逐渐关闭
D. D.此航班使用1号马达,下一航班使用2号
【单选题】
掺混空气活门的作用是什么?___
A. A.通过加入热空气来调节区域
B. B.通过加入冷空气来调区域温度
C. C.调节热空气压力
D. D.掺入一部分循环空气到座舱
【单选题】
掺混空气活门由什么控制?___
A. A.组件控制器
B. B.区域控制器
C. C.管道过热传感器
D. D热空气压力调节活门
【单选题】
当AEVC探测到气流量比需求值高时,哪个活门打开?___
A. A.蒙皮空气出口活门
B. B.蒙皮热交换器进口旁通活门
C. C.空调进口活门
D. D.蒙皮热交换器出口旁通活门
【单选题】
飞机高度39000英尺,客舱高度正常情况下最大为:___
A. A.8000英尺
B. B.12000英尺
C. C.14000英尺
D. D.39000英尺
【单选题】
空调组件过热时,哪个传感器气动关闭流量控制活门?___
A. A.组件进口引气温度传感器
B. B.压气机出口气动过热传感器
C. C.组件出口过热传感器
D. D.组件进口引气压力传感器
【单选题】
控制PACK出口温度的传感器在:___
A. A.涡轮出口
B. B.冷凝器下游
C. C.水分离器下游
D. D.压气机下游
【单选题】
如果区域控制器完全失效,PACK出口温度如何变化?___
A. A.24℃
B. B.PACK1为20℃,PACK2为10℃
C. C.15℃
D. D.固定在当前温度
【单选题】
如果一个组件控制器完全失效,PACK出口温度如何变化?___
A. A.另一个组件控制器接替工作,此组件工作不受影响
B. B.组件出口温度固定在24℃
C. C.组件出口温度固定在15℃
D. D.组件出口温度固定在当前温度
【单选题】
下列说法错误的是?___
A. A.热空气调压活门关闭时,通往驾驶舱,前后客舱的掺混空气活门也同时关闭
B. B.再循环风扇故障不影响温度调节
C. C.卫生间,厨房排气扇故障不影响客舱温度调节
D. D.冲压进气口在空中不全开
【单选题】
压气机气动过热传感器用于PACK过热时关闭:___
A. A.掺混空气活门
B. B.热空气压力活门
C. C.组件流量控制活门
D. D.旁通活门
【单选题】
用于调节区域温度的掺混空气压力必须:___
A. A.与客舱压力一致
B. B.高于客舱压力2PSI
C. C.高于客舱压力4PSI
D. D.高于客舱压力6.5PSI
【单选题】
怎样用人工方式控制增压系统?___
A. A.系统1失效,自动进入人工方式
B. B.系统2失效,自动进入人工方式
C. C.不可能,没有人工方式
D. D.按压方式选择电门到人工方式
【单选题】
当空调面板上HOTAIR电门上FAULT灯亮时,因为过热:___
A. A热空气压力调节活门关闭,掺混空气活门关闭
B. B热空气压力调节活门打开,掺混空气活门关闭
C. C热空气压力调节活门关闭,掺混空气活门打开
D. D.没有活门会受影响,需人工控制
【单选题】
正常飞行当蒙皮温度低于35℃时,电子舱通风系统控制冷却空气的温度,方法是:___
A. A增加来自驾驶舱的空气
B. B将空气通过蒙皮热交换器
C. C蒙皮空气进出口活门完全打开
D. D将空气抽出机外
【单选题】
冲压空气电门何时能给座舱引入外界空气?___
A. A任何时候
B. B只在客舱内外压差小于1PSI时
C. C只在客舱内外压差大于1SPI时
D. D只在外流活门完全打开时
【单选题】
空调组件控制器主通道故障时会出现什么情况?___
A. A辅助通道以备份方式工作,调节不是最优
B. B辅助通道完全替代工作
C. C空调组件失效
D. D相应组件出口温度固定在15摄氏度
【单选题】
空调组件控制器辅助通道故障时会出现什么情况?___
A. A对空调组件的调节无影响,只是备份方式失效
B. B空调组件失效
C. C无任何影响
D. D相应组件出口温度固定在15摄氏度
【单选题】
空调组件控制器主通道和辅助通道故障时会出现什么情况?___
A. A通过防冰活门将空调组件的出口温度控制在15℃
B. B空调组件完全失效
C. C无任何影响
D. D另一个组件控制器自动接替工作
【单选题】
如果热空气压力调节活门失效在全开位,会出现什么情况?___
A. A优化调节失效
B. B温度保持在故障发生时所选择的值
C. C无影响
D. D两个空调组件完全失效
【单选题】
如使用APU引气,空调组件的流量自动选择在:___
A. A高位
B. B正常位
C. C低位
D. D零位
【单选题】
掺混空气活门是通过下列哪种方法优化温度的?___
A. A增加热空气
B. B增加新鲜空气
C. C调节空调组件的流量
D. D增加冷空气
【单选题】
热空气压力调节活门:___
A. A调节热空气压力
B. B在无空气时弹簧保持打开
C. C在管道过热时自动打开
D. D电马达驱动
【单选题】
空调组件流量控制活门:___
A. A电控气动
B. B气控电动
C. C在发动机开车时自动打开
D. D只有开和关两个位置
【单选题】
区域温度可在何处选择?___
A. A驾驶舱
B. B客舱
C. C货舱
D. D驾驶舱和客舱
【单选题】
关于发动机的压力要求,当一个区域的加热和冷却需求不能实现时:___
A. A必须人工增加最小慢车
B. B自动增加最小慢车
C. C在任何情况下,飞行慢车都足够
D. DEIU会自动关断相应发动机引气
【单选题】
最大正常客舱高度为:___
A. A8000英尺
B. B9550英尺
C. C14000英尺
D. D39000英尺
【单选题】
最大客舱负压差为:___
A. A0
B. B-0.1PSI
C. C-0.5PSI
D. D-1PSI
【单选题】
在高温机场长时间过站时,能否同时使用空调组件和地面空调车:___
A. A是
B. B否
C. C是,如果外界温度大于50℃
D.
【单选题】
混合组件与什么相连接:___
A. A空调组件,客舱空气,应急冲压空气入口及地面空调接口
B. B空调组件,应急冲压空气入口及地面空调接口
C. C空调组件和客舱空气
D. D发动机和APU引气管路
【单选题】
一旦设置在“ON”位,空调组件将如何工作:___
A. A自动且各自独立
B. B飞机离地后自动工作
C. C组件1正常工作,组件2备用
D. D发动机运转时自动工作
【单选题】
RAMAIR电门设置在“ON”位时,应急冲压空气进口门将在何时打开:___
A. A任何情况
B. B如果未选择水上迫降
C. C内外压差<1PSI且未选择水上迫降
D. D前起减震支柱压缩时
【单选题】
如果区域控制器主通道故障,空调组件提供哪个温度:___
A. A组件1将驾驶舱温度控制在24℃,组件2将前后客舱温度控制在24℃
B. B组件1将温度固定在20℃,组件2将温度固定在10℃
C. C空调组件1和2将出口温度固定在15℃
D. D热空气压力调节活门完全打开
【单选题】
经调节后的空气被分配到:___
A. A驾驶舱,货舱及客舱
B. B驾驶舱,前后客舱
C. C驾驶舱,电子舱,客舱
D. D驾驶舱和轮舱
【单选题】
客舱区域温度传感器是由从厨房和盥洗室风扇抽取的空气进行通风的:___
A. A正确
B. B错误
C.
D.
【单选题】
温度控制是自动的,并由下列哪一项调节:___
A. A区域控制器
B. B空调组件1和2控制器
C. CBMC1和2
D. D以上A和B两项
【单选题】
如果空调组件控制器故障,空调组件出口温度被调节到:___
A. A0℃
B. B15℃
C. C18℃
D. D24℃
【单选题】
如果空调组件控制器故障,空调组件出口空气温度由谁控制:___
A. A空调组件旁通活门
B. B空调防冰活门
C. C空调组件流量控制活门
D. D热空气压力调节活门
【单选题】
当冲压空气按钮设置在ON位时,外流活门将:___
A. A关闭
B. B完全都打开
C. C当压差小于1PSI时部分打开
D. D当压差大于1PSI时打开
推荐试题
【单选题】
An administrator is monitoring a High Availability (HA) and Distributed Resource Scheduler (DRS) enabled cluster and has noticed that virtual machines in the cluster are being migrated without user intervention. Why is this happening? ___
A. The DRS Automation level is set to Fully Automated.
B. The Automation level is set to Automatic.
C. The
D. PM Threshold is set to Aggressive.
【单选题】
An administrator attempts to migrate a suspended virtual machine to a newly deployed vSphere 6.x cluster. The compatibility check fails. What condition could cause this behavior?___
A. The new vSphere 6.x cluster is running Intel CPUs instead of AMD CPUs.
B. A suspended virtual machine cannot be migrated.
C. The hardware virtualization feature of the CPU is not enabled on the new hosts.
D. A vSphere Distributed Switch is required to migrate a suspended virtual machine.
【单选题】
A vSphere administrator has been using vSphere in evaluation mode and now wants to deploy an environment that provides the same features. Which edition of vSphere provides similar functionality to evaluation mode? ___
A. Enterprise Plus
B. Enterprise
C. Standard
D. Essentials
【单选题】
A vSphere administrator has been using vSphere in evaluation mode and now wants to deploy an environment that provides the same features. Which edition of vSphere provides similar functionality to evaluation mode? ___
A. Enterprise Plus
B. Enterprise
C. Standard
D. Essentials
【单选题】
An administrator has just configured the IP address on an ESXi host from the Direct Console User Interface. How can the configuration be validated as correct without any additional tools?___
A. Add the host to vCenter Server and if it works, then all networking settings are ok.
B. Select the Test Management Network option from the DCUI.
C. Connect to the host with the vSphere Client and click the Test Network option.
D. Use PowerCLI to connect to the host and initiate a network test.
【单选题】
An administrator is installing vCenter Server for an environment that has 40 ESXi 6.x Hosts and 150 virtual machines. Which database would meet the minimal requirements needed for this task? ___
A. vFabric Postgres
B. Microsoft SQL Express 2008
C. Microsoft SQL Server 2014
D. Oracle 11g
【单选题】
What is a requirement when enabling a Virtual SAN cluster in an existing High Availability (HA) and Distributed Resource Scheduler (DRS) Cluster? ___
A. Disable DRS and HA before enabling Virtual SAN
B. Enable DRS before enabling Virtual SAN
C. Disable HA before enabling Virtual SAN
D. Enable Storage DRS before enabling Virtual SAN
【单选题】
The vSphere administrator attempts to connect to an ESXi host via an SSH client and receives the following security alert: The vSphere administrator needs to determine whether the RSA key fingerprint shown in the security alert is the fingerprint of the intended ESXi host. Which tool should the vSphere administrator use? ___
A. Direct Console User Interface
B. vSphere Client
C. vSphere Web Client
D. vSphere Management Assistant
【单选题】
An administrator needs to monitor traffic on vSwitches in a vSphere 6.x environment. Which option, if configured, would accomplish this task? ___
A. Forged Transmits
B. MAC Address Changes
C. Promiscuous Mode
D. Notify Switches
【单选题】
What is true regarding datastores on ESXi 6.x? ___
A. NFS 4.1 datastore does not support Fault Tolerance (FT)
B. VMFS3 and VMFS5 datastores can be newly created
C. NFS datastore can be concurrently mounted using NFS 4.1 on one host and NFS on another
D. NFS 3.0 datastore does not support Fault Tolerance (FT)
【单选题】
An administrator is cloning and configuring five new web server virtual machines. What would be the benefit of configuring resource shares for the new VMs? ___
A. To prioritize access to a resource during contention.
B. To guarantee access to a resource during contention.
C. To prioritize access to a resource before contention occurs.
D. To guarantee access to a resource before contention occurs.
【单选题】
An administrator logs into the vSphere Web Client and sees the warning shown in the Exhibit. During a change control window, the warning was addressed. What should be done to verify that the host is no longer showing the warning? ___
A. Run a Remediate host operation.
B. Recheck the compliance of the host.
C. Restart the host to get rid of the warning.
D. Install VMware tools to clear the warning.
【单选题】
A vApp named Sales has a Memory Limit of 32 GB and a CPU Limit of 12,000 MHz. There are three virtual machines within the vApp: <Sales-DB -- Has a memory reservation of 20 GB. > <Sales-DC -- Has a memory reservation of 8 GB. > <Sales-Web -- Has a memory reservation of 8 GB.> Which statement is correct? ___
A. All three virtual machines can power on, but will have memory contention.
B. All three virtual machines can power on without memory contention.
C. Only two of the three virtual machines can power on.
D. Only one of the virtual machines can power on.
【单选题】
You are editing the management network configuration of an ESXi 6.x Host from the vSphere Web Client. You mistakenly put the incorrect VLAN in place for the management network. What action do you need to take to correct this? ___
A. You need to manually edit the configuration on the host with command line utilities.
B. No action is required. By default ESXi rolls back configuration changes that disconnect the host.
C. The ESXi host system configuration will need to be restored to the factory configuration to fix the issue.
D. The change can be reverted in the vSphere Web Client by simply editing the switch again.
【单选题】
What is true about resource pools created on a Distributed Resource Scheduler (DRS) cluster?___
A. A root resource pool is created with the specified values.
B. A root resource pool is automatically created using the aggregate total of the ESXi host resources in the cluster.
C. A root resource pool is automatically created using the aggregate total of all resources in the datacenter.
D. A root resource pool is not needed when creating resource pools on a DRS cluster.
【单选题】
An administrator attempts to enable Enhanced vMotion Compatibility (EVC) on a cluster. The operation results in a compatibility error, as shown in the exhibit. What is the likely cause of this error? ___
A. The CPUs in the ESXi host are not AMD CPUs.
B. The CPUs in the ESXi host do not support hardware virtualization capabilities.
C. The XD/NX CPU features have not been enabled in the BIOS of the server.
D. There is no shared storage between the hosts in the cluster.
【单选题】
What condition would prevent an administrator from creating a new VMFS3 datastore on an ESXi 6.x host using the vSphere Web Client? ___
A. A VMFS3 datastore cannot be created on an ESXi 6.x host.
B. The VMFS3 kernel module is not loaded.
C. A VMFS3 datastore cannot be mounted on an ESXi 6.x host.
D. VMFS3 datastores are not compatible with virtual machines created on an
E. SXi 6.x host.
【单选题】
During a new vSphere Distributed Switch configuration, where does the Maximum Transmission Unit (MTU) value get modified? ___
A. Uplink Settings
B. Switch Settings
C. Portgroup Settings
D. NIC Teaming Settings
【单选题】
A small company wants to use VMware products for its production systems. The system administrator needs to recommend a solution that will deliver High Availability to the company's production applications. What is minimum vSphere offering that will support this requirement? ___
A. vSphere Essentials
B. vSphere Essentials Plus
C. vSphere Hypervisor
D. vSphere Standard
【单选题】
Which scenario shows a reason for VMware Tools failing to install? ___
A. Virtual machine has a CD-ROM configured.
B. Guest OS Antivirus is blocking the VMware Tools installation.
C. Guest OS has 64-bit ldd (list dynamic dependencies) utility installed.
D. Virtual machine is powered on.
【单选题】
An administrator is configuring an ESXi 6.x host to use multiple NICs to resolve a management network redundancy error. After configuring a second NIC, the server is not able to communicate when the primary connection is taken down. The administrator analyzes the Exhibit shown here. Based on the exhibit, what is the likely cause of the issue? ___
A. vmnic4 is not attached to a vSwitch.
B. vmnic2 is not connected to a physical switch.
C. E1000 is the incorrect NIC
D. river for this card.
【单选题】
What information is required as part of an interactive ESXi 6.x installation? ___
A. Keyboard layout
B. IP Address
C. Root password
D. DNS information
【单选题】
What is the default load balancing policy for a newly created VMkernel port on a vSphere Distributed Switch? ___
A. Route based on orginating virtual port ID
B. Route based on IP Hash
C. Route based on source mac address
D. Route based on physical NIC load
【单选题】
An administrator deploys vCenter Server using the embedded Platform Services Controller. After testing the deployment for a couple of months, it is determined that the environment would be better served with an external Platform Services Controller. What should the administrator do to meet this new requirement? ___
A. Deploy a fresh instance of vCenter Server with an external Platform Services Controller.
B. Perform a fresh install of an external Platform Services Controller.
C. Migrate the embedded Platform Services Controller to an external Platform Services Controller.
D. Upgrade the embedded Platform Services Controller to an external Platform Services Controller.
【单选题】
Why are some virtual machines orphaned after rebooting a High Availability (HA) enabled host? ___
A. The Orphaned virtual machines have HA restart disabled.
B. The Orphaned virtual machines moved recently and the change did not persist.
C. The host is attached to failed storage.
D. The host just came out of maintenance mode.
【单选题】
Which vSphere 6 Standard Edition feature will allow an organization to ensure that critical multi-threaded applications have the maximum possible uptime? ___
A. Fault Tolerance
B. High Availability
C. Distributed Resource Scheduler
D. App HA
【多选题】
An application running in a virtual machine is experiencing performance issues. When utilizing performance monitoring utilities, it is noted that the CPU Utilization of the application is at 100%. Which two scenarios are probable causes of the CPU contention for the application? (Choose two.)___
A. There is a network I/O constraint.
B. There is a storage I/O constraint.
C. There is insufficient disk space assigned to the virtual machine.
D. The application is not virtualization aware.
【多选题】
A Fault Tolerance (FT) virtual machine with four vCPUs is experiencing high latency when performing ICMP and Application tests. What are three potential causes that may be attributing to this latency? (Choose three.)___
A. The FT network has insufficient bandwidth and is running on a 1GB Link.
B. The FT network is on a particularly high latency link.
C. The FT network has been configured with Network I/O Control.
D. The FT virtual machine is running an e1000 network adapter.
E. The
F. T virtual machine is running on poor performing network-based storage.
【多选题】
A virtual machine is experiencing performance issues. The following performance metrics are observed: <CPU usage value for the virtual machine is above 90%> < CPU ready value for the virtual machine is above 20%> Which two activities will likely resolve the performance issues? (Choose two.)___
A. Set a CPU reservation for the virtual machine.
B. Increase the CPU limit on the virtual machine.
C. Decrease CPU shares equally for all virtual machines on the host.
D. Increase CPU shares equally for all virtual machines on the host.
【多选题】
An administrator is upgrading a vSphere Distributed Switch. The existing switch is version 6.0 and the administrator wants to upgrade to the latest version possible. The environment contains several ESXi 6.1 hosts. Which two options are available to ensure that the upgraded switch will be compatible with these hosts? (Choose two.)___
A. Upgrade the vSphere Distributed Switch to 6.0
B. Upgrade the ESXi 5.5 hosts to version 6.0, then upgrade the vSphere Distributed Switch to 5.5
C. Upgrade the vSphere Distributed Switch to 5.1
D. Upgrade the
E. SXi host switches to 5.5, then upgrade the vSphere Distributed Switch to 5.5
【多选题】
An administrator attempts to create a Thick Provisioned Virtual Disk (VMDK) on an NFS datastore; but it fails. Which two reasons would explain the failure? (Choose two.)___
A. Datastore is on an NFS 3 storage server that does not support Hardware Acceleration
B. Datastore is on an NFS 4.1 storage server
C. Only VMFS datastores support "Thick Provisioned" VMDK
D. The NFS datastore was not created on a "Thick Provisioned" device
【多选题】
Which two NFS Protocol versions does vSphere 6 support? (Choose two.)___
A. Version 3
B. Version 3.1
C. Version 4
D. Version 4.1
【多选题】
Which three operations occur during a cold migration of a virtual machine? (Choose three.)___
A. The virtual machine disks are moved if the datastore is being changed.
B. The virtual machine is registered with the destination server.
C. The source virtual machine is removed from the old hosts.
D. The virtual machine hardware is upgraded.
E. The virtual machine files are quiesced prior to the migration.
【多选题】
A 4 GB Memory virtual machine is experiencing extended memory issues, as shown in the Exhibit. What potential issues could be attributed to this memory pressure?___
A. A limit is imposed on the virtual memory of this virtual machine.
B. The Balloon driver has been uninstalled.
C. A limit has been imposed on the Virtual CPU of the virtual machine.
D. Storage IO control has been enabled for the virtual machine causing the swapped memory.
【多选题】
You are creating a virtual machine in the Web Client using the New Virtual Machine wizard. Which two steps are required? (Choose two.)___
A. Select a valid name.
B. Select a cluster for the compute resource.
C. Select a network adapter.
D. Select the virtual machine compatibility.
【多选题】
An administrator has been given requirements to configure vMotion for a new virtual machine. The configuration should: <Provide Network Redundancy Use VLAN 550> <Be secured against anyone trying to spoof communication The vSwitch1 configuration is shown in the Exhibit.> Which three changes should be made to meet the stated requirements? (Choose three.)___
A. The VLAN ID must be set appropriately.
B. The default values for MAC Address Changes and Forged Transmits must be altered.
C. The teaming and failover adapters must be set appropriately.
D. The Traffic Shaping configuration must be altered.
E. The Load Balancing Policy must be set appropriately.
【多选题】
Which three traffic types are available services options when configuring a vmkernel port? (Choose three.)___
A. Provisioning Traffic
B. Virtual Volumes Traffic
C. vSphere Replication NFC Traffic
D. Virtual SAN Traffic
E. FCoE Traffic
【多选题】
An administrator logs into the vSphere Web Client, but is unable to see any hosts and clusters. Which two options could fix the problem? (Choose two.)___
A. Verify that the client web browser and vCenter Server are in the same broadcast domain.
B. Verify that the vCenter Server system is registered with the same Platform Services Controller as the vSphere Web Client.
C. Log in to the vCenter Server as a user within the Active
D. irectory domain.
【多选题】
Which three VLAN Tagging modes are available in vSphere 6.x? (Choose three.)___
A. External Switch Tagging
B. Private VLAN Tagging
C. Virtual Switch Tagging
D. VXLAN Tagging
E. Virtual Guest Tagging
【多选题】
Which two statements are true about VMFS5 datastores on ESXi 6.x? (Choose two.)___
A. Virtual Disk (VMDK) size can be larger than 2TB.
B. Datastore extent size can be larger than 2TB.
C. Only Physical Mode Raw
D. evice Map (Passthrough-RDM) can be larger than 2TB.