【单选题】
PScell变更过程中对测量结果进行评估判决的是哪个网元? ___
A. gNodeB
B. eNodeB
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
A
解析
暂无解析
相关试题
【单选题】
以下信道或信号中,发射功率跟随PUSCH的是哪项? ___
A. PUSCH
B. PUCCH
C. SRS
D. PRACH
【单选题】
SA网络中,关于NR小区重选的准则描述错误的是哪项?___
A. R_s=Qmeas,s+Qhyst
B. 触发最好小区重选时需要满足R_s<R_n
C. R_n=Qmeas,n-Qoffset
D. 满足判决条件至少5s后才会触发重选
【单选题】
广播消息RMSI和随机接入响应消息RAR,默认采用哪种MSC传输? ___
A. MSC0
B. MSC3
C. MSC1
D. MSC2
【单选题】
gNodeB在执行资源调度时需要考虑信道质量信息。___
A. 正确
B. 错误
【单选题】
用NR覆盖高层楼宇时,NR广播波束场景化建议配置成以下哪项?___
A. SCENARTO_1
B. SCENARIO_0
C. SCENARIO_13
D. SCENARIO_6
【单选题】
如果NR广播波束配置成水平3dB为65°波束,则对64T63R的AAU来说,它支持的方位角调测的范围是以下___
A. -42°~42°
B. -22°~22°
C. -10°~10°
D. 0°
【单选题】
UE接入LTE网络后,LTE小区会向UE发送哪条消息用以测量NR小区信号?___
A. A1
B. A2
C. B1
D. B2
【单选题】
做5G的C波段上行链路估算时,UE的发射功率一般为多少? ___
A. 26dBm
B. 33dBm
C. 23dBm
D. 30dBm
【单选题】
标识NR随机接入竞争解决完成的是哪个消息?___
A. Msg1
B. Msg4
C. Msg3
D. Msg2
【单选题】
NR测量控制消息通过eNodeB的哪条消息下发给UE?___
A. RRC连接建立
B. RRC连接重配置
C. RRC连接重建立
D. RRC连接重配完成
【单选题】
UE发送前导后没有得到gNodeB的响应,则会攀升功率再次发送前导。___
A. 正确
B. 错误
【单选题】
以下信道或信号通常采用开环功控的是哪项?___
A. PRACH
B. PUSCH
C. PUCCH
D. SRS
【单选题】
5G RAN2.1中,ChMeas.MCS.DuCell主要是用来测量以下哪类指标?___
A. 网络负载
B. 信道质量
C. 移动性能
D. 小区业务量
【单选题】
NSA组网中,NR出现掉话时会记录在5G网络侧。___
A. 正确
B. 错误
【单选题】
5G的C波段中,Numerology取1时对应的子载波间隔是多大? ___
A. 30Khz
B. 5Khz
C. 60Khz
D. 15Khz
【单选题】
NR小区的SS信道功率会根据实际环境进行动态调整。___
A. 正确
B. 错误
【单选题】
5G RAN2.1 64T64R的AAU可以最多支持多少种广播波束场景配置?___
A. 17
B. 8
C. 3
D. 5
【单选题】
一NR小区SSB波束采用默认模式,天线挂高35米,机械下倾角为3°,数字下倾配置为0°,则此小区主覆盖波瓣的下沿(近点)距离基站大约是多少米?___
A. 1200 米
B. 150米
C. 330米
D. 670米
【单选题】
NR子载波配置为30Khz时,其对应每时隙的符号数和时隙数分别是多少?___
A. 14;20
B. 12;20
C. 12;40
D. 14;40
【单选题】
64T64R AAU在默认配置场景下,广播波束的水平3dB波宽和垂直3dB波宽分别是多少?___
A. 65°、6°
B. 105°、6°
C. 65°、12°
D. 105°、12°
【单选题】
Massive MIMO默认配置的水平扫描范围和垂直扫描范围分别为以下哪项?___
A. 105°;6°
B. 65°;6°
C. 105°;12°
D. 90°;12°
【单选题】
在SA组网中做下载业务时,因服务小区信号差而启动切换判决阶段的事件是哪项?___
A. A4
B. A1
C. A3
D. A2
【单选题】
上行定时使距离gNodeB不同的UE发送上行数据能同时到达gNodeB。___
A. 正确
B. 错误
【单选题】
重传数据的调度优先级高于初传数据调度优先级。___
A. 正确
B. 错误
【单选题】
Massive MIM0基于SRS加权或PMI加权获得的波束一般称为什么波束?___
A. 动态波束
B. 窄波束
C. 宽波束
D. 静态波束
【单选题】
5G控制信道和广播信道采用预定义的权值生成离散的什么波束?___
A. 宽波束
B. 半静态波束
C. 静态波束
D. 动态波束
【单选题】
62.为了满足上行峰值测试的性能要求,上行参考信号DRS类型需要设置成以下哪种类型?___
A. Type3
B. Type1
C. Type2
D. Type4
【单选题】
路测中发现N派的aNodcB触发了辅站异常释放流程,在以下哪条消总里可议看到异常原因?___
A. SgNodeB Reconnection Request
B. SgNodeB Release Request
C. SN Status Transfer
D. SgNodeB Release Confirm
【单选题】
NR逻辑信道根据传输数据的类型分为控制信道于业务信道。___
A. 正确
B. 错误
【单选题】
NR系统的覆盖问题优化原则是先优化SS SINR,然后优化SS RSRP。___
A. 正确
B. 错误
【单选题】
NR系统中A3测量报告上报的最大小区数固定为4个。___
A. 正确
B. 错误
【单选题】
NR采用A3事件触发PSCell变更。___
A. 正确
B. 错误
【单选题】
NR网络的调度功能主要是在RRC层实现的. ___
A. 正确
B. 错误
【单选题】
NSA组网中,用户的QCI信息可以在以下哪条命令里取到? ___
A. SN Atatus Transfer
B. SgNB Mod REQ
C. SgNB Add REQ
D. RRC conn RECFG
【单选题】
SA组网中,UE做小区搜索的第一步是以下哪项?___
A. 获取小区其它信息
B. 获取小区信号质量
C. 帧同步,获取PCI组编号
D. 半帧同步,获取PCI组内ID
【多选题】
NR中,以下哪些信道可以采用动态波束进行管理?___
A. CSI
B. PUSCH
C. SSB
D. PDSCH
【多选题】
SA网络中,呼叫建立成功率和以下哪些指标相关?___
A. QoS流建立成功率
B. SgNode添加成功率
C. NGSIG连接建立成功率
D. RRC连接建立成功率
【多选题】
"NR小区使用可用率KPI用来评估小区的服务情况,以下哪些情况属于指标Radio Network Unavailability Rate统计的范围?___
A. 单板故障
B. 传输故障
C. 核心网故障
D. 射频故障
【多选题】
"关于功率控制主要用途描述正确的有哪些?___
A. 改善终端及基站功耗
B. 抑制5G同频小区间干扰
C. 补偿信道的路径损耗和阴影衰落
D. 保证网络覆盖和容量需求
【多选题】
UE在接入NSA网络时,出现SgNB_Add_Reject信令的可能原因有哪些?___
A. 5G例传输故障导致接入拒绝
B. 5G小区用户数License不足
C. X2链路不通
D. NR小区受干扰严重导致搜索不到
推荐试题
【多选题】
Which three statements are correct regarding booting an ESXi Host from Fibre Channel SAN? (Choose three.)___
A. Direct connect topology is supported.
B. Each host must have its own boot LUN.
C. ESXi hosts do not require local storage.
D. Multipathing to a boot LUN on an active-passive array is supported.
E. Hosts can share one common boot LUN.
【多选题】
Which two tasks should a vSphere administrator perform if the vmkernel log reports VMFS metadata errors? (Choose two.)___
A. contact VMware technical support
B. reformat the datastore
C. check the device with VOMA
D. ignore the messages
【多选题】
Which two statements are true for a vCenterServer user account that is used for vSphere Data Protection (VDP)? (Choose two.)___
A. The user account must be assigned with Administrator role.
B. The password for the user account cannot contain spaces.
C. The user account should be created in the Single Sign-On domain
D. The user account cannot inherit required permissions from a group role.
【多选题】
Which three storage protocols are supported by Virtual Volumes? (Choose three.)___
A. FCIP
B. FCoE
C. iSCSI
D. NFS v3
E. NFS v4
【多选题】
A vSphere administrator observes a CPU spike on one of the web servers (view the Exhibit.) Which two statements can describe the cause of this activity? (Choose two.)___
A. The network packet size is too large.
B. VMware Tools is not installed.
C. Disk latency is present on the datastore.
D. The network packet size is too small.
【多选题】
Which three operations can cause VMFS metadata updates? (Choose three.)___
A. Restarting a VM using the guest OS.
B. Launching a VM console.
C. Migrating a VM with vMotion.
D. Powering a VM on or off.
E. Expanding a VMFS datastore.
【多选题】
*What two services run on all nodes in a vCenter Server HA cluster? (Choose two.)___
A. vmware-vmon
B. vmware-vpostgres
C. vmare-rbd-watchdog
D. vmware-vcha
【多选题】
Which two statements are true regarding Auto Deploy in version 6.5? (Choose two.)___
A. Auto Deploy can be configured and managed via PowerCLI.
B. Auto Deploy can be configured and managed via the vSphere Client.
C. Auto
D. eploy can be configured and managed via the vSphere Web Client.
【多选题】
What three options can improve network performance for a virtual machine? (Choose three.)___
A. MLD
B. TSO
C. NetFlow
D. LRO
E. SR-IOV
【多选题】
Which two storage technologies are supported for MSCS? (Choose two.)___
A. NFS
B. VAAI
C. iSCSI
D. FC
【多选题】
When upgrading a VMware vSAN cluster to version 6.5, which two tasks must be completed to comply with upgrade requirements and VMware-recommended best practices? (Choose two.)___
A. Use RVC to upgrade the hosts.
B. Use the latest available ESXi version.
C. Back up all VMs.
D. Use only the “Full data migration” maintenance mode option.
【多选题】
What two enhancements are in VMFS6 but not in VMFS5? (Choose two.)___
A. Support for 4k native disks
B. Support for 512e disks
C. GPT storage device partitioning
D. Automatic space reclamation
【多选题】
Which two statements describe why a vSphere DRS cluster would report load imbalance? (Choose two.)___
A. The configured migration threshold is too high.
B. The configured migration threshold is too low.
C. DRS is configured for Partially Automated.
D. Enhanced vMotion Compatibility (EVC) is enabled.
【多选题】
A vSphere Administrator must ensure that vCenter Server service is running in a domain user account rather than Local System Account. To accomplish this, the user account should have which two permissions? (Choose two.)___
A. Log on as a service.
B. Act as part of the operating system.
C. Log on as a batch job.
D. Log on locally.
【多选题】
A virtual machine fails to power on after being deployed from a template. What two remediation steps could correct this issue? (Choose two.)___
A. Increase CPU reservation
B. Decrease memory reservation
C. Increase memory reservation
D. Increase datastore capacity
E. Decrease CPU reservation
【多选题】
Which three directories are available under the vcsa-cli-installer folder of the vCenter Server Appliance installation media? (Choose three.)___
A. \mac
B. \ovftool
C. \migration-assistant
D. \win32
E. \lin64
【多选题】
What are three considerations when booting ESXihost from SAN software FCoE? (Choose three.)___
A. The VMware_FCoE_vSwitch that the installer automatically created cannot be changed.
B. Boot LUN cannot be shared with other hosts even on shared storage.
C. Multipathing is not supported at pre-boot.
D. Software FCoE boot configuration cannot be changed from within
E. SXi.
【多选题】
Which two choices are applicable to vSphere Availability? (Choose two.)___
A. Heartbeat Datastores
B. VM Startup/Shutdoown
C. Power Management
D. Admission Control
【多选题】
A user is a member of groups A and B. -VM10 and VM20 are in VM Folder. -Group A is assigned permission “Read-only” on VM Folder. What two configurations will allow the user to edit the settings for only VM10? (Choose two.)___
A. Assign group B permission “virtual machine power user” to VM10.
B. Assign group B permission “virtual machine console user” to VM10.
C. Assign group A permission “virtual machine console user” to VM10.
D. Assign group A permission “virtual machine power user” to VM10.
【多选题】
Which two new vSphere 6.5 features enable an Administrator to locate configuration options when creating or editing host profiles more easily than in previous versions? (Choose two.)___
A. Add the configuration option to favorites.
B. Navigate the option tree.
C. Search for the configuration option.
D. Copy the configuration option from a different profile.
【多选题】
What are the two valid storage controller types for VMs on ESXi 6.5? (Choose two.)___
A. FCoE
B. SATA
C. NVMe
D. iSCSI
【多选题】
Which two options can optimize conversion with VMware Converter? (Choose two.)___
A. Disable real-time antivirus scanners.
B. Remove the source from Active Directory.
C. Remove third-party device drivers.
D. Exclude diagnostic partitions from conversion.
E. Disable Volume Shadow Copy (VSS).
【多选题】
vSphere Availability considers which two factors for virtual machine restarts? (Choose two.)___
A. Host Isolation Response
B. file accessibility
C. NUMA node size
D. resource reservations
【多选题】
Which two virtual NICs support Wake-on-Lan to resume a virtual machine that is in standby mode? (Choose two)___
A. Flexible
B. E1000E
C. E1000
D. vmxnet 3
【多选题】
Which two logs should be examined to troubleshoot a Windows vCenter Server upgrade failure? (Choose two.)___
A. vminst.log
B. vim-um-msi.log
C. firstboot.log
D. pkgmgr.log
【多选题】
Which are two supported storage primitives for VAAI NAS? (Choose two.)___
A. Full File Clone
B. Reserve Space
C. hardware assisted locking
D. block zeroing
【多选题】
Which two parameters must be configured for Windows in-guest disk mirroring? (Choose two.)___
A. scsi#.returnNoConnectDuringAPD = “FALSE”
B. scsi#.terminateVMOnPDL = “TRUE”
C. scsi#.returnBusyOnNoConnectStatus = “FALSE”
D. scsi#.returnNoConnectDuringAPD = “TRUE”
【多选题】
Which two items are required to enable NPIV in a virtual machine? (Choose two.)___
A. use of physical RDMs
B. physical HBA support
C. use of virtual disks
D. hardware version 11 or higher
【多选题】
A vSphere Administrator has VM Component Protection (VMCP) enabled, but the VM was not restarted when one of the VMFS datastores experienced an All Paths Down (APD) failure. What two scenarios would explain why the virtual machine was not restarted? (Choose two.)___
A. VM Monitoring is required in order for VMCP to failover during an APD event.
B. VMware Tools is not installed on the guest operating system for the VM.
C. Insufficient Capacity is available on the failover ESXi hosts.
D. The APD failure was corrected before the VM could be restarted.
【多选题】
What are two requirements in order to restore a Resource Pool Tree from a snapshot? (Choose two.)___
A. vSphere DRS must be turned on.
B. A restore can only be performed on a vSphere DRS cluster within the original vCenter Server.
C. vSphere
D. RS must be turned off.
【多选题】
Which three vSphere features are compatible with vSphere Replication? (Choose three.)___
A. vSphere High Availability
B. vSphere Fault Tolerance
C. vSphere Storage
D. RS
【多选题】
What two VMware Remote Console Options can be defined in the virtual machine settings? (Choose two.)___
A. Boot Delay
B. Maximum number of sessions
C. Guest OS lock
D. Total video memory
【多选题】
VMware Converter can import a powered off virtual machine from which two virtual machine platforms?(Choose two.)___
A. Microsoft Hyper-V
B. Citrix Xen
C. VMware Workstation
D. Linux with KVM
【多选题】
Which two options allow storage space reclamation? (Choose two.)___
A. Use VMFS6 datastores.
B. Use esxcli storage vmfs unmap.
C. Use the SAN console (management tool).
D. Use the vSphere Web Client.
【多选题】
An administrator must reprovision 25 hosts with a new image profile that he has created. Which two methods can the administrator use to change the image profile? (Choose two.)___
A. From the vSphere Web client home page, select the Deploy Rules tab in the Auto Deploy section.
B. Run the Copy-Deploy Rule and specify the Replace Item parameter with Power CLI.
C. From the vSphere Web client home page, select the Assign Rules tab in the Auto
D. eploy section.
【多选题】
What are three parameters for traffic filtering or marking? (Choose three.)___
A. Protocol
B. Traffic Direction
C. DSCP value
D. virtual Port ID
【多选题】
The vSphere administrator must change the path selection policy (PSP) to comply with best practices. Which two interfaces can be used to change the PSP? (Choose two.)___
A. ESXi shell
B. vSphere Client
C. ESXi host client
D. vSphere Web Client
【多选题】
In what two ways can Storage DRS load balance virtual machines? (Choose two.)___
A. anti-affinity rules
B. virtual storage controller
C. guest OS family
D. I/O latency
【多选题】
What two reasons can explain why a host cannot be removed from a vSphere Distributed Switch? (Choose two.)___
A. There are virtual machine network adapters connected to the switch.
B. There are blocked ports on the switch.
C. There are LACP LAGs configured on the switch.
D. There are VMkernel network adapters connected to the switch.
【多选题】
Which three requirements are true for the vCenter Server HA network? (Choose three.)___
A. Network latency between all nodes must be less than 10 milliseconds.
B. IP addresses for all nodes must be static.
C. HA network IP addresses for all nodes can be on different subnets.
D. IP addresses must be on the same network as the management network.
E. A default gateway must be configured.