【单选题】
左门状态监控 ___:Mp 车左侧门安全回路供电。(摘自维修手册)
A. =84-F211
B. =84-F212
C. =84-F213
D. =84-F214
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
A
解析
暂无解析
相关试题
【单选题】
右门状态监控___:Mp 车右侧门安全回路供电。(摘自维修手册)
A. =84-F211
B. =84-F212
C. =84-F213
D. =84-F214
【单选题】
门控单元1、3、5___:Mp 车1、3、5 号EDCU 供电(摘自维修手册)
A. =82-F201
B. =82-F202
C. =82-F203
D. =82-F204
【单选题】
门控单元2、4、6___:Mp 车2、4、6 号EDCU 供电。(摘自维修手册)
A. =82-F201
B. =82-F202
C. =82-F203
D. =82-F204
【单选题】
门控单元7、8___:Mp 车7、8 号EDCU 供电(摘自维修手册)
A. =82-F201
B. =82-F202
C. =82-F203
D. =82-F204
【单选题】
左门状态监控___:M 车左侧门安全回路供电。(摘自维修手册)删除
A. =84-311
B. =84-312
C. =84-313
D. =84-314
【单选题】
门右门状态监控___:M 车右侧门安全回路供电。(摘自维修手册)删除
A. =84-311
B. =84-312
C. =84-313
D. =84-314
【单选题】
门控单元1、3、5___:M 车1、3、5 号EDCU 供电。(摘自维修手册)
A. =82-F301
B. =82-F302
C. =82-F303
D. =82-F304
【单选题】
门控单元2、4、6___:M 车2、4、6 号EDCU 供电。(摘自维修手册)删除
A. =82-F301
B. =82-F302
C. =82-F303
D. =82-F304
【单选题】
门控单元7、8___:M 车7、8 号EDCU 供电。(摘自维修手册)
A. =82-F301
B. =82-F302
C. =82-F303
D. =82-F304
【单选题】
长沙地铁1号线车辆一列车安装有___个接地装置。(摘自维修手册)
A. 12
B. 16
C. 20
D. 24
【单选题】
长沙地铁1号线车辆的轨距是___mm。(摘自维修手册)
A. 1353
B. 1435
C. 2300
D. 12600
【单选题】
长沙地铁1号线车辆的转向架中心距是___mm。(摘自维修手册)
A. 1353
B. 1435
C. 2300
D. 12600
【单选题】
长沙地铁1号线车辆的全新轮滚动圆直径是___mm。(摘自维修手册)
A. 770
B. 805
C. 840
D. 850
【单选题】
长沙地铁1号线车辆的全磨耗轮滚动圆直径是___mm。(摘自维修手册)
A. 770
B. 805
C. 840
D. 850
【单选题】
长沙地铁1号线车辆的转向架中心牵引装置为___。(摘自维修手册)
A. 双牵引杆
B. 四牵引杆
C. 单牵引杆
D. 无牵引杆
【单选题】
长沙地铁1号线车辆每个转向架设有___个带停放制动的踏面制动单元。(摘自维修手册)
A. 1
B. 2
C. 3
D. 4
【单选题】
长沙地铁1号线车辆每车设置___高度阀调节车体地板高度。(摘自维修手册)
A. 一个
B. 二个
C. 三个
D. 四个
【单选题】
长沙地铁1号线车辆的转向架整体起吊装置上部通过___连接牵引座,下部与构架相连。( A )(摘自维修手册)
A. 钢丝绳
B. 拉杆
C. 钢板
D. 油缸
【单选题】
长沙地铁1号线车辆的转向架根据安装部件的差异分为___种。( D )(摘自维修手册)
A. 2
B. 3
C. 4
D. 5
【单选题】
当一列运行的列车在15km/h的速度(在空载情况下)下与另一静止的列车相撞时,___能有效地吸收其碰撞能量。( B )(摘自车辆检修工教材)
A. 车体底架
B. 车钩
C. 司机室底架
D. 车体侧梁
【单选题】
Tc车的1位端是带有___的一端。(摘自维修手册)
A. 半永久牵引杆
B. 全自动车钩
C. 半自动车钩
D. 贯通道
【单选题】
以下车钩部分没有可压溃变形管的是___。(摘自维修手册)
A. Tc车1位端
B. M1车2位端
C. M1车1位端
D. M2车2位端
【单选题】
M车的1位端是连接___的一端。( A )(摘自维修手册)
A. 半永久牵引杆
B. 全自动车钩
C. 半自动车钩
D. 司机室
【单选题】
为防止车体底架遭受破坏,配置了过载保护装置,能吸收一定的冲击能,它安装在___。(摘自维修手册)
A. B车一位端
B. A车一位端
C. A车二位端
D. C车二位端
【单选题】
空调系统干燥过滤器中的干燥剂用来吸收制冷循环系统中的___。 (摘自维修手册)
A. 杂质
B. 空气
C. 水分
D. 铜锈
【单选题】
长沙地铁一期工程地铁车辆空调机组的蒸发器选用的材料为___。(摘自维修手册)
A. 铜管铝翅片
B. 铜管铜翅片
C. 铝管铜翅片
D. 铝管铝翅片
【单选题】
空调机组蒸发器的主要作用为对送入客室的空气进行除湿和___。 (摘自维修手册)
A. 冷却
B. 加热
C. 加湿
D. 除菌
【单选题】
长沙地铁一期工程车辆空调机组选用的制冷剂为___。(摘自维修手册)
A. R134a
B. R22
C. R407C
D. R413
【单选题】
长沙地铁1号线车辆最大运行速度为___km/h。(摘自维修手册)
A. 60
B. 70
C. 80
D. 90
【单选题】
在长沙地铁1号线车辆中不会导致列车牵引封锁的为___。(摘自车辆电气原理图)
A. 客室车门没有关好
B. 主风缸压力值为6BAR
C. 停放制动没有缓解
D. 单个车门被切除
【单选题】
在长沙地铁1号线车辆中由车辆自动控制的制动类型为___。(摘自车辆检修工教材)
A. 紧急制动
B. 快速制动
C. 常用制动
D. 保持制动
【单选题】
关于快速制动,下列说法正确的是___。(摘自车辆检修工教材)
A. 快速制动是电空混合制动
B. 快速制动是不可恢复的制动
C. 快速制动力小于常用制动力
D. 快速制动的控制气路与紧急制动相同
【单选题】
下列部件不属于主电路系统的是___。 (摘自车辆电气原理图)
A. 受电弓
B. 高速断路器
C. 充电机
D. 制动电阻
【单选题】
蓄电池充电机基本特点中,当蓄电池充电机无法正常启动时,应具有___功能。(摘自维修手册)
A. 快速启动
B. 慢速启动
C. 强制启动
D. 紧急启动
【单选题】
牵引系统中网压额定最高限值为___V。(摘自维修手册)
A. 2100
B. 1950
C. 1850
D. 1500
【单选题】
长沙地铁1号线列车受电弓的额定工作气压是___。(摘自维修手册)
A. 550kPa
B. 500kPa
C. 450kPa
D. 650kPa
【单选题】
每辆动车安装的轴端接地装置的数量是___。(摘自维修手册)
A. 2
B. 4
C. 6
D. 8
【单选题】
长沙地铁1号线列车将方向手柄置于向后位时牵引列车,列车自身最高限速为___。(摘自维修手册)
A. 3km/h
B. 10km/h
C. 60km/h
D. 45km/h
【单选题】
产生旋转磁场的条件是对称的绕组上通___
A. 对称频率             
B. 对称的电流  
C. 不对称的电流          D、对称电压
【多选题】
可压溃管的行程包括___。(摘自维修手册)
A. 100mm
B. 200mm
C. 300mm
D. 400mm
推荐试题
【单选题】
vSphere 6.5 DRS is now Network-Aware. Based on network utilization, when will DRS balance VMs?___
A. DRS will balance VMs when a network resource pool is configured for VMs.
B. DRS will balance VMs when Network I/O Control is enabled.
C. DRS will place VMs on initial boot for hosts that have network utilization lower that the threshold.
D. DRS will vMotion VMs when network utilization is higher than the threshold on a particular host.
【单选题】
A scripted upgrade of ESXi fails due to an incorrect parameter in the upgrade script. What file must the administrator modify to correct the problem?___
A. vmreconfig.pl
B. hostinfo.pl
C. ks.cfg
D. boot.cfg
【单选题】
A VM folder contains VM1 and VM2. Group A has permission to power on virtual machines, defined on the VM folder and its children. Group B has permission to power off virtual machine VM2. If a user is a member of group A and B, what action can the user perform?___
A. Suspend VM2.
B. Power off VM1.
C. Power on and power off VM1.
D. Power on and power off VM2.
【单选题】
The networking team has requested to have a dedicated network for iSCSI traffic. This task has been assigned to the vSphere Administrator. What is the VMware-recommended way to accomplish this?___
A. Configure Static Routes on each ESXi Server.
B. Configure the right subnet.
C. Create a custom IP Stack.
D. Define a dedicated gateway for the iSCSI vmkernel.
【单选题】
To prevent possible failures or issues during a vSphere upgrade, which component should be upgraded first?___
A. ESXi Hosts
B. virtual machines
C. datastores
D. vCenter Server
【单选题】
What is the command for updating an ESXi host?___
A. esxcli software vib update –d /vmfs/volumes/Datastore/DirectoryName/PatchName.zip
B. esxupdate software update –d”/vmfs/volumes/Datastore/DirectoryName/PatchName.zip”
C. esxcli software update –d “/vmfs/volumes/Datastore/DirectoryName/PatchName.zip”
D. esxupdate software vib update –d /vmfs/volumes/Datastore/DirectoryName/PatchName.zip
【单选题】
A vSphere Administrator would like to identify which physical NUMA node their virtual machine is currently residing on. What esxtop metric would provide this information?___
A. GST_ND[x]
B. OVD_ND[x]
C. NRMEM
D. NHN
【单选题】
How can a vSphere administrator ensure that two virtual machines never run on the same datastore in a datastore cluster, while permitting the VMs to be load-balanced?___
A. Use an Intra-VM Anti-Affinity Rule.
B. Configure a storage DRS VM override.
C. Disable storage
D. RS for the VMs.
【单选题】
What is the VMware-recommended way to move a physical adapter out of Network I/O Control’s scope?___
A. Set the teaming policy to “Route Based on Physical NIC Load.”
B. Add the vmnic to the Net.NetNiocAllowOverCommit parameter in Advanced System Settings.
C. Add the vmnic to the Net.IOControlPnicOptOut parameter in Advanced System Settings.
D. Move the vmnic to a different vmUplink port on the Distributed Switch.
【单选题】
A VM folder contains VM1 and VM2. Group A has permission to power on virtual machines, defined on the VM folder and its children. Group B has permission to power off virtual machines, defined on the VM folder and its children. If a user is a member of Groups A and B, what will be the user’s effective permission on VM1 and VM2?___
A. Power on
B. Power off.
C. Power on and Power off.
D. Reset.
【单选题】
Group 1 is granted console interaction on a VM folder. User 1 is granted no console interaction on the same VM folder. What will be the outcome if User 1 tries to access the console of a virtual machine?___
A. User 1 will not be able to access the virtual machines in the VM folder.
B. User 1 will not have access to the virtual machine console.
C. User 1 will have access to the virtual machine console.
D. User 1 will have console access only via the vSphere Web Client.
【单选题】
Which statement is true regarding the use of VMFS3 datastores with vSphere 6.5?___
A. VMFS3 datastores can be used but not created.
B. VMFS3 datastores can be neither used nor created.
C. VMFS3 datastores will be present but unmounted.
D. VMFS3 datastores can be created and used.
【单选题】
In the Exhibit, each VM has a 1GHz non-expandable reservation. If all VMs are powered on in sequence, what would be the outcome?___
A. VM4 cannot be powered on.
B. VM5 cannot be powered on.
C. VM6 cannot be powered on.
D. VM3 cannot be powered on.
【单选题】
vSphere 6.5 introduced MAClearning capabilities for VMware’s virtual switches. What three benefits will it provide? (Choose three.)___
A. Reduced memory consumption.
B. Reduced consumption of extra CPU cycles.
C. Increased network throughput.
D. Prevent packet flooding inside the vSwitch.
【单选题】
What is the default pathing policy for most active-active arrays?___
A. Fixed
B. Most Recently Used
C. Dynamic
D. isk Morroring
【单选题】
Which command will show the iSCSI sessions on a ESXi 6.5 host?___
A. esxcli storage iscsi session get
B. esxcli iscsi session get
C. esxcli storage iscsi session
D. esxcli iscsi session list
【单选题】
Which of the following is not a parameter for traffic filtering or marking?___
A. virtual port ID
B. Protocol
C. Traffic Direction
D. DSCP value
E. Traffic redirection
【单选题】
A vSphere administrator wants to enable a virtual machine with Secure Boot, but in VM setting, Secure Boot option was not found under Boot Options. What could be the cause?___
A. The virtual hardware is not compatible.
B. The virtual machine has missing drivers.
C. The virtual machine OS does not support secure boot.
D. VMware Tools is not upgraded.
【单选题】
A virtual machine is connected on a distributed port group where the average bandwidth configured in the traffic shaping policy is 100 Mbps. The VM network adapter is configured with a reservation of 200 Mbps. What is the VM’s effective bandwidth?___
A. 200 Mbps
B. 100 Mbps
C. 150 Mbps
D. 400 Mbps
【多选题】
What are two reasons why a datastore in a Storage DRS cluster cannot enter maintenance mode?(Choose two.)___
A. Storage latency is too high to allow Storage DRS initiate Storage vMotion.
B. Storage DRS is configured for a VMFS3 datastore.
C. Storage
D. RS is disabled on the virtual disk.
【多选题】
What two methods are used to configure VMware vSphere Storage I/O Control shares and limits? (Choose two.)___
A. Assign shares and limits to VM virtual disks.
B. Assign shares and limits to datastores.
C. Assign shares and limits to Storage (DRS) clusters.
D. Assign shares and limits using VM storage policies.
【多选题】
ESXi 6.5 introduces VMFS6, which supports both 512e and 512n devices. What three configurations are supported when using these devices? (Choose three.) ___
A. Hosts with both 512e and 512n devices.
B. Storage vMotion between both 512e and 512n devices.
C. Datastore Extents spanned between both 512e and 512n devices.
D. Storage DRS clusters containing only both 512e and 512n devices.
【多选题】
A vSphere Administrator observes that the Primary VM configured with Fault Tolerance is executing slowly. After further investigation, it is determined that the Secondary VM is on an overcommitted ESXi host. What two methods will correct the problem? (Choose two.)___
A. Use Storage vMotion to migrate the Secondary VM to another datastore.
B. Use vMotion to migrate the Secondary VM to a different ESXi host.
C. Configure a CPU limit on the Primary VM which will also apply to the Secondary VM.
D. Turn off and turn on FT in order to recreate the Secondary VM on a different datastore.
【多选题】
Which two features require the use of Host Profiles? (Choose two.)___
A. Host Customizations
B. shared storage
C. Auto
D. eploy
【多选题】
What three processes on the vCenter Server Appliance (VCSA) does“vmware-watchdog monitor? (Choose three.) ___
A. vmware-eam
B. vmcad
C. vmware-vpostgres
D. vpxd
E. vsan-health
【多选题】
What three processes on the vCenter Server Appliance (VCSA) does“vmware-watchdog monitor? (Choose three.) ___
A. vmware-eam
B. vmcad
C. vmware-vpostgres
D. vpxd
E. vsan-health
【多选题】
Which two statements correctly describe VM-Host affinity rules? (Choose two.) ___
A. When there is more than one VM-Host affinity rule in a vSphere DRS cluster, the rules are applied equally.
B. After creating a VM-Host affinity rule, its ability to function in relation to other rules is predetermined.
C. When there is more than one VM-Host affinity rule in a vSphere
D. RS cluster, the rules will be ranked.
【多选题】
An administrator wants to enable proactive HA by moving virtual machines automatically if a hardware alert is triggered. What are the three required settings? (Choose three.)___
A. Set vSphere DRS Automation to Partially Automated.
B. Turn on Proactive HA.
C. Set the Proactive HA Automation Level to Manual.
D. Set the Proactive HA Automation Level to Automated.
E. Turn on vSphere HA and vSphere DRS.
【多选题】
If vCenter Server 5.5 installation has one or more services deployed remotely, which three services are relocated to vCenter Server 6.5 on upgrade? (Choose three.)___
A. vCenter Inventory Services
B. vSphere Authentication Proxy
C. vSphere Web Client
D. vSphere
E. SXi Dump Collector
【多选题】
What two debugging levels can a virtual machine be configured to? (Choose two.)___
A. Verbose
B. Debugging
C. Statistics
D. Trivia
【多选题】
What are three benefits of using a few large-capacity LUNs instead of many small-capacity LUNs? (Choose three.) ___
A. Better performance because there is less contention for a single volume.
B. More flexibility for resizing virtual disks.
C. Less wasted storage space.
D. More flexibility to create virtual machines without adding new LUNs.
E. Fewer VMFS datastores to manage.
【多选题】
Which two configurable options are available in Boot Options for a virtual machine? (Choose two.)___
A. Tools Upgrades
B. Encryption
C. Firmware
D. Force BIOS setup
【多选题】
Which three VMware-recommended best practices should an administrator follow before upgrading to vSphere 6.5? (Choose three.)___
A. Disconnect ESXi host from vCenter.
B. VMware Tools are installed in the virtual machine.
C. Ensure that the system hardware complies with ESXi requirements.
D. Back up the host.
E. Check the interoperability of any other software integrated with vSphere.
【多选题】
What are two requirements to enable EVC in vSphere DRS cluster? (Choose two.)___
A. CPUs must be from the same vendor.
B. EVC must use the lowest possible baseline supported by the hardware.
C. CPUs must be in the same family and of the same speed.
D. No VMs may be running in the cluster.
【多选题】
What three conditions could result in VMware Flash Read Cache being unable to claim a disk? (Choose three.)___
A. The disk is not listed in the VMware hardware compatibility guide.
B. The disk is not detected as an SSD.
C. The disk is not detected as local.
D. The disk is in use by VMFs.
【多选题】
Boot from SAN is supported on which three storage technologies? (Choose three.)___
A. VMware vSAN
B. FCoE
C. NFS 4.1
D. iSCSI
E. FC
【多选题】
Which two components are part of storage I/O multipathing on ESXi? (Choose two.)___
A. SATP
B. VASA
C. PSP
D. VAAI
【多选题】
Which two statements are true about Highly Available vSphere Auto Deploy infrastructure? (Choose two.)___
A. It helps prevent data loss.
B. It is a prerequisite for using vSphere Auto Deploy with stateful install.
C. It requires two or more Auto
D. eploy servers.
【多选题】
The virtual machine log rotation size can be changed for all VMs by which two interfaces? (Choose two.)___
A. PowerCLI
B. vSphere Web Client
C. ESXi host client
D. esxcli
【多选题】
Which two configuration options can exclude virtual disks from snapshot operations? (Choose two.)___
A. Use RDM in virtual mode for virtual disk.
B. Use virtual disks in Independent – Persistent mode.
C. Use a virtual disk larger than 2 TB in size.
D. Use RDM in physical mode for virtual disk.