【单选题】
SDH同步网定时基准传输链中,相邻两个G.812时钟之间的SDH网元设备时钟数目不超过___个
A. 10
B. 20
C. 60
D. 99
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
B
解析
暂无解析
相关试题
【单选题】
SDH系统对于155M帧结构而言,指针值的范围为___
A. 0-256
B. 0-128
C. 0-782
D. 0-1008
【单选题】
SDH网络中最基本的模块为STM-1,传输速率为___Mbit/s。
A. 155.52
B. 51.84
C. 466.56
D. 622.08
【单选题】
SDH映射单元中,虚容器VC-4的基帧结构为___。
A. 4(9*4-1)
B. 4(9*12-1)
C. 9*85
D. 9*261
【单选题】
SDH网络单元主要有同步数字交叉连接设备、分插复用器、终端复用器和___。
A. 同步光缆线路系统
B. 激光器
C. 再生中继器
D. 波分复用器
【单选题】
在配置PTN的ATM业务,我们需要在ATM 策略中一般将固定语音配置___业务流。
A. UBR;
B. CBR;
C. RT-VBR;
D. NRT-VBR;
【多选题】
PTN设备支持的以下时钟中,那些是需要中间各个节点都支持该类型时钟的。___
A. 同步以太时钟
B. 同步SDH时钟
C. CES ACR时钟
D. TOP时钟
【多选题】
PTN3900用EG16做处理板时,对应的接口板类型可以为___
A. ETFC
B. EFG2
C. POD41
D. D75
【多选题】
关于PTN的调测,以下哪些说法是正确的___
A. PTN网元即使在网元处于安装态时网元配置数据上载操作仍然可以成功。
B. 通过MDS2610,我们可以进行网元IP、ID和网元名称的设置;还可以进行光口光功率测量和单板状态的检查;同时还可以用MDS2610下发命令配置脚本;
C. 我们可以用MDS 2610清空PTN网元的数据库;
D. PTN可以采用DC工具对网元进行升级,可以使用集成在网管的DC工具,也可以使用独立部署的DC工具;
【多选题】
关于PTN控制平面,以下哪些说法是正确的?___
A. FRR可以设置多条bypass隧道;APS只能配置一条保护隧道
B. PTN动态tunnel的标签是用LDP协议分配的,动态PW标签是用RSVP-TE协议分配的;
C. 目前,PTN的MPLS tunnel的是单向的;
D. 网元ID在PTN控制平面中起到唯一标识这台网元,并在控制平面的信令协商中起作用。
【多选题】
关于PTN的XDSL特性,以下哪些说法是正确的___
A. PTN盒式设备的XDSL板有ADS2和SHD4,其中SHD4单板有ATM和EFM两种模式。
B. PTN盒式设备的ADS2板支持多路绑定的功能。
C. PTN的offload场景,有基于EFM转发和基于IP转发的offload应用场景。
D. 在两端PTN设备上创建动态tunnel时,需要在DSLAM设备上配置命令允许BPDU报文通过。
【多选题】
以下关于PTN DCN的说法中那些是正确的___
A. PTN的网元ID,网元IP和LSR ID和DCN都有关系
B. PTN的DCN通道传送的是非网关网元和网关网元之间的网管信息
C. PTN的DCN路由是通过ISIS协议学到的。
D. PTN的POD41单板,EFG2单板,EX2单板上的两个口默认DCN都是使能的。
【多选题】
在PTN的五款产品中,支持在“网络侧”用以下哪几种接口组网?___(注意是指网络侧)
A. GE
B. POS STM-4/STM-1
C. XDSL
D. ML-PPP/E1
E. IMA E1
【多选题】
以下关于PTN支持的业务描述正确的是___
A. 目前PTN支持多个ATM连接汇聚映射到一个PW中
B. 目前PTN不支持多个CES业务汇聚映射到一个PW中
C. PTN 设备间可以建立ATM PW 来仿真端到端的ATM 业务
D. 目前PTN支持多个以太业务汇聚映射到一个PW中
【多选题】
以下关于MPLS Tunnel的 1+1保护和1:1保护描述正确是___
A. 如果要对MPLS Tunnel进行保护,需要创建MPLS Tunnel保护组。
B. MPLS Tunnel 1+1保护的业务双发选收,MPLS Tunnel 1:1保护的业务单发单收。
C. MPLS Tunnel 1:1保护的业务有双端倒换和单端倒换两种,MPLS Tunnel 1+1保护只有单端倒换;
D. MPLS Tunnel 1:1保护的APS协议通过保护Tunnel传送,相互传递协议状态和倒换状态。
【多选题】
以下关于PTN的PW说法正确的是___
A. 在PTN 中,对于动态PW和静态PW,均要求源、宿两端网元的PW ID一致。
B. 在PTN中,对于静态PW标签配置,源网元的出标签一定要等于宿网元的入标签,源网元的入标签一定要等于宿网元的出标签。
C. 在PTN中,PW标签是封装在PWE3头里的,可以支持对多个CES,以太和ATM业务汇聚到一条PW的功能;
D. PTN的一条PW是由“PW ID+PW 类型+PW peer”这三要素指定的。
【多选题】
下列关于设备散热要求描述无误的是___。
A. 定期清洗风扇盒防尘网。通常2个月至少清洗一次,对于环境较差的机房,需要缩短清洗周期
B. 子架上散热孔不应有杂物,如2M线缆、尾纤等
C. 日常检查单板是否发烫,子架通风口风量是否大
D. 子架温度可在网管上监视
【多选题】
环回是日常维护和故障处理的常用操作,以下关于环回操作错误的是___。
A. 硬件环回可以人工用尾纤、自环电缆对光口、电口直接进行环回
B. 执行内环回后的信号是流向本SDH网元外部
C. 执行环回后的信号是流向本SDH网元内部
D. 对光口进行硬件环回操作时需要加光衰
【多选题】
OptiX OSN 2500下发命令进行交叉主、备倒换操作返回了错误,可能的原因是___。
A. 主、备主控模块正在进行数据同步
B. 主、备两块单板的软件不一致
C. 备用CXL处于安装态
D. 备用CXL板故障
【多选题】
OptiX OSN 3500/2500/1500业务处理板无法删除的原因可能是___。
A. 此单板上配置有业务或保护
B. 处理板的逻辑安装类型和单板的实际物理类型不一致
C. 处理板软件加载不全,没有开工
D. 存在接口板,而接口板没有事先删除
【多选题】
以下描述ECC路由的说法,正确的有:___。
A. 网管通过TCP/IP协议与网关网元通信;网关网元和非网关网元之间通过ECC路由通信。
B. 链型网中,如果非网关网元的主控板不在位,则该网元及其后的网元都不能登录。
C. 如果网关网元的主控板不在位,则所有该网关网元管理的网元都不能登录。
D. 网络中所有网元的IP地址都必须和网管计算机的网卡的IP地址在同一网段,否则不能登入。
【多选题】
PTN3900用EG16做处理板时,对应的接口板类型可以为:___
A. ETFC
B. EFG2
C. POD41
D. D75
【多选题】
关于PTN的调测,以下哪些说法是正确的:___
A. PTN网元即使在网元处于安装态时网元配置数据上载操作仍然可以成功
B. 通过MDS2610,我们可以进行网元IP、ID和网元名称的设置;还可以进行光口光功率测量和单板状态的检查;同时还可以用MDS2610下发命令配置脚本
C. 我们可以用MDS 2610清空PTN网元的数据库
D. PTN可以采用DC工具对网元进行升级,可以使用集成在网管的DC工具,也可以使用独立部署的DC工具
【多选题】
关于PTN控制平面,以下哪些说法是正确的?:___
A. FRR可以设置多条bypass隧道;APS只能配置一条保护隧道
B. PTN动态tunnel的标签是用LDP协议分配的,动态PW标签是用RSVP-TE协议分配的
C. 目前,PTN的MPLS tunnel的是单向的
D. 网元ID在PTN控制平面中起到唯一标识这台网元,并在控制平面的信令协商中起作用
【多选题】
关于PTN的XDSL特性,以下哪些说法是正确的___
A. PTN盒式设备的XDSL板有ADS2和SHD4,其中SHD4单板有ATM和EFM两种模式
B. PTN盒式设备的ADS2板支持多路绑定的功能
C. PTN的offload场景,有基于EFM转发和基于IP转发的offload应用场景
D. 在两端PTN设备上创建动态tunnel时,需要在DSLAM设备上配置命令允许BPDU报文通过
【多选题】
以下关于PTN DCN的说法中那些是正确的:___
A. PTN的网元ID,网元IP和LSR ID和DCN都有关系
B. PTN的DCN通道传送的是非网关网元和网关网元之间的网管信息
C. PTN的DCN路由是通过ISIS协议学到的
D. PTN的POD41单板,EFG2单板,EX2单板上的两个口默认DCN都是使能的
【多选题】
PTN设备支持的以下时钟中,那些是需要中间各个节点都支持该类型时钟的___
A. 同步以太时钟
B. 同步SDH时钟
C. CES ACR时钟
D. TOP时钟
【多选题】
SDH网络是由一些SDH网络单元(NE)组成的,并完成___的功能。
A. 同步信息传输
B. 复用
C. 分插
D. 交叉连接
【多选题】
SDH常见的网络拓扑包括___
A. 线形
B. 星形
C. 环形
D. 树型
【多选题】
在PTN的五款产品中,支持在“网络侧”用以下哪几种接口组网?___(注意是指网络侧)
A. GE
B. POS STM-4/STM-1
C. XDSL
D. ML-PPP、E1、EIMA、E1
【多选题】
以下关于PTN支持的业务描述正确的是___
A. 目前PTN支持多个ATM连接汇聚映射到一个PW中
B. 目前PTN不支持多个CES业务汇聚映射到一个PW中
C. PTN 设备间可以建立ATM PW 来仿真端到端的ATM 业务
D. 目前PTN支持多个以太业务汇聚映射到一个PW中
【多选题】
与SDH 相比,DWDM 在扩容时:___
A. 更容易中断原来的业务
B. 更容易保护原来的业务
C. 比较方便
D. 系统更复杂
【多选题】
SDH网元内部存在的通信方式主要有___
A. 2M通信
B. 邮箱通信
C. 板间通信
D. 串口通信
【多选题】
SDH体制中集中监控功能的实现由___
A. 段开销
B. 线路编码的冗余码
C. 通道开销
D. 业务净负荷
【多选题】
下面的哪些SDH设备告警和性能能够引发复用段保护发生倒换___
A. TU12-AIS
B. AU-AIS
C. MS-AIS
D. R-LOF
【多选题】
SDH设备可配置成TM网元,它的特点是___
A. 所有光方向到TM的业务必须落地;
B. 只能有一个光方向;
C. 不同光方向的业务不能通过光板直接穿通;不同光方向的业务
D. 光板的最高速率必须低于622M。
【判断题】
PTN网络需要感知PWE3所承载的业务。
A. 对
B. 错
【判断题】
PTN的POD41板可以承载IP tunnel。
A. 对
B. 错
【判断题】
对于OptiX PTN 3900上TPS保护,如果接口板D75或者D12故障,对应处理母板+子卡(MP1+MQ1)正常,是不能够进行TPS保护的。
A. 对
B. 错
【判断题】
当ETFC、POD41、EFG2安装在OptiX PTN 1900的第3至第7槽位时,对应的处理板为CXP,不需要配置其他类子卡。
A. 对
B. 错
【判断题】
目前TPS保护倒换支持的处理子卡主要有:MD1,MQ1,CD1。
A. 对
B. 错
推荐试题
【单选题】
By default, how often is the vCenter vpx user password automatically changed?___
A. 15 days
B. 60 days
C. 30 days
D. 45 days
【单选题】
Which metric in the Exhibit would identify high latency for a virtual machine operating system?___
A. QAVG/cmd
B. KAVG/cmd
C. DAVG/cmd
D. GAVG/cmd
【单选题】
What VM Monitoring setting would ensure that the failure interval for a virtual machine is defined as 120 seconds?___
A. High
B. Normal
C. Low
D. Medium
【单选题】
The business managers have asked the IT administrator to ensure configuration compliance in the vSphere infrastructure. The IT administrator wants to use Host Profiles to accomplish this, but is unable to do so. Why is the administrator unable to use Host Profiles?___
A. The infrastructure uses a vSphere Standard license.
B. The infrastructure has servers with various CPU families.
C. The user has only the “Administrator” role.
D. Host Profiles apply only to storage settings.
【单选题】
What is the result of a “Consolidate” action on a virtual machine?___
A. All snapshots on the virtual machines will be deleted.
B. The virtual machine will be reverted to its last snapshot.
C. Redundant delta disks will be combined and deleted.
D. A new snapshot with memory state will be created.
【单选题】
A Telco customer is implementing NFV using vSphere as the virtualization platform. Which feature can help achieve a high packet rate with lower CPU consumption?___
A. Network I/O Control
B. SplitRX
C. ERSPAN
D. LACP
【单选题】
What is the VMware-recommended best practice for Fibre Channel zoning?___
A. soft zoning
B. single-initiator-multiple-target zoning
C. single-initiator zoning
D. single-initiator-single-target zoning
【单选题】
How can a vSphere administrator ensure that a set of virtual machines run on different hosts in a DRS cluster?___
A. Use a VM-Host affinity rule.
B. Add the VMs to a vApp.
C. Use a VM-VM affinity rule.
D. Place the VMs in different folders.
【单选题】
vCenter Server Appliance Instance can be backed up using which Client Interface?___
A. vSphere Client Interface
B. vSphere Web Client Interface
C. VMware Host Client Interface
D. Virtual Appliance Management Interface
【单选题】
What tool can capture network traffic at the uplinks, or vSwitch, or virtual port levels?___
A. tcpdump-uw
B. wireshark
C. pktcap-uw
D. pcap
【单选题】
Which storage feature always requires the use of third-party software on ESXi?___
A. Hardware Acceleration for NAS devices
B. VVOL
C. Hardware Acceleration for Block
D. evices
【单选题】
An ESXi host's VMCA-Signed certificate has expired. How can the certificate be renewed?___
A. In the vSphere Web Client, browse to the host in question. Click the Manage tab and select settings. Select System and click Certificate, then click the Renew button.
B. In the vSphere Web Client, browse to the host in question. Click the Manage tab and select settings. Select System and click Certificate, then click the Refresh CA Certificates button.
C. Run the command /sbin/generate-certificates on the affected host.
D. Disconnect the host from vCenter Server and reconnect it.
【单选题】
Which is the correct order for upgrading vSphere components?___
A. vCenter Server, ESXi hosts, VMware Tools, Virtual Machine hardware
B. VMware Tools, Virtual Machine hardware, ESXi hosts, vCenter Server
C. vCenter Server, Virtual Machine hardware, VMware tools, ESXi hosts
D. ESXi hosts, vCenter Server, Virtual Machine hardware, VMware Tools
【单选题】
Which iSCSI initiator type can be used with any network interface card?___
A. Software iSCSI initiator
B. Software FCoE adapter
C. Hardware Independent iSCSI initiator
D. Hardware Dependent iSCSI initiator
【单选题】
An administrator is attempting to power on a virtual machine with 32GB of memory. The operation fails with the following error: <Could not power on VM: No space left on device> <Checking the space on the virtual machine's datastore, there is 30GB free.> Which action would allow the VM to power on?___
A. Set a 2GB memory reservation on the VM.
B. Mount the virtual disk from the affected VM on to another virtual machine and free up space from within the OS.
C. Enable vSphere HD admission control on the cluster in which the VM resides.
D. Set a 2GB memory limit on the VM.
【单选题】
An administrator attempts to manually reclaim space on thin-provisioned VMFS6 volumes but finds that no additional space is being recovered. Which could be causing this?___
A. vSphere 6.5 does not support manual UNMAP.
B. The manual UNMAP operation has been moved to the vSphere web client.
C. The VASA version is use is incompatible.
D. UNMAP is automated for VMFS6.
【单选题】
An administrator has upgraded to vSphere 6.5 and also wants to use Kerberos authentication for NFS. Which can be done to the existing NFSv3 volumes to enable this feature?___
A. Perform a storage rescan on VMFS volumes.
B. Unmount the NFSv3 datastore, and then mount as NFSv4.1 datastore.
C. Nothing. All NFSv3 mounted datastores are upgraded automatically during vSphere upgrades.
D. Perform a scan of new storage devices.
【单选题】
An administrator wants to restore the vCenter Server Appliance 6.5 from backup. Where can this be accomplished?___
A. from the ESXi Host Client
B. from the VMware vSphere Appliance Management Interface
C. from within the VMware vSphere Web Client
D. from the vCenter Server Appliance Installer
【单选题】
The administrator wants to power on VM-K2, which has a 2GHz CPU reservation. VM-M1, VM-M2, and VM-K1 are all powered on. VM-K2 is not powered on. The exhibit shows the parent and child resource reservations. If Resource Pool RP-KID is configured with an expandable reservation, which statement is true?___
A. VM-K2 will be unable to power on because there are insufficient resources.
B. VM-K2 will be able to power on since resource pool RP-KID has 2GHz available.
C. VM-K2 will be unable to power on because only 2GHz are reserved for RP-KID.
D. VM-K2 will receive resource priority and will be able to power on this scenario.
【单选题】
Which is the block size on the VMFS6 datastore?___
A. All small and large file blocks are 8MB.
B. All small and large file blocks are 1MB.
C. Small file blocks are 512KB. large file blocks are 64MB.
D. Small file blocks are 1MB, large file blocks are 512MB.
【单选题】
When installing vCenter Converter Standalone, why must an administrator perform a client-server installation instead of a local installation?___
A. to manage conversion tasks remotely
B. to convert virtual machines as well as physical machines
C. to allow installation of the Converter agent on remote source machines
D. to hot clone physical or virtual machines
【单选题】
Which is required by vCenter Converter Standalone to convert a physical Red Hat Enterprise Linux 7 machine to a virtual machine?___
A. The Linux machine must be powered off.
B. The Linux machine must have the SSH daemon started.
C. The Linux machine must use a static IP address.
D. The Linux machine must have a fully-qualified domain name.
【单选题】
An administrator is troubleshooting network communications between a vCenter Server and an ESXi 6.5 host. Which log shows the related events between these components?___
A. /var/log/fdm.log
B. /var/log/vpxa.log
C. /var/log/hostd.log
D. /var/log/auth.log
【单选题】
An administrator has recently upgraded from vSphere 6.0 to 6.5, and can no longer see the software iSCSI named vmhba33. Which could be the reason for this?___
A. The upgrade has changed the vmhba name.
B. vSphere 6.5 automates iSCSI configurations.
C. vSphere 6.5 no longer supports software iSCSI.
D. The upgrade has deleted the vmhba.
【单选题】
An administrator is trying to vMotion a VM from his datacenter to a recovery site. Which is the maximum allowed RTT (Round-Trip Time) latency between source and destination host?___
A. 100 milliseconds
B. 150 milliseconds
C. 15 milliseconds
D. 10 milliseconds
【单选题】
Which is required for configuring iSCSI Software Adapter network port binding?___
A. VMkernel of the iSCSI traffic must be load balanced using Route based on IP Hash algorithm.
B. VMkernel of the iSCSI traffic must be load balanced using Route based on Source Virtual Port ID algorithm.
C. VMkernel of the iSCSI traffic must be load balanced using Route based on Source MAC Hash algorithm.
D. VMkernel of the iSCSI traffic must be bound to only one active network adapter.
【单选题】
In vSphere Data Protection 6.1, which is the function of a Backup Verification job?___
A. None. Backup Verification job is not a feature of vSphere Data Protection
B. It is a manual task -Power it on -Verify the guest OS -Check started applications
C. It is an automatic process -Restore a virtual machine -Power it on -Verify that the guest OS is booted by communicating with the Backup Verification agent
D. It is an automatic process -Restore a virtual machine -Power it on -Verify that the guest OC is booted by detecting the VMware ToolsTM "heartbeats"
【单选题】
An administrator has enabled vSphere Distributed Switch Health Check. The hosts connected to that Distributed Switch all display an alert:< vSphere Distributed Switch MTU supported status > .The administrator has all of the VMkernel ports MTU sizes set to 1600. Which action will remedy this problem?___
A. Configure the Distributed Switch to MTU 9100.
B. Disconnect and reconnect the physical network cable.
C. Configure the physical switch to MTU 1600.
D. Disable the Distributed Switch MTU.
【单选题】
Which Host Profile Subprofile configuration is used to configure firewall settings for ESXi hosts?___
A. Advanced Configuration Settings
B. General System Settings
C. Security
D. Networking
【单选题】
Where would a vSphere administrator find general vCenter Server logs on a vCenter Server Appliance?___
A. /var/log/vmware/vpxd/
B. /var/log/messages
C. /etc/vmware-vpx/
D. /var/log/vmware/vsan-health/
【单选题】
An administrator wishes to enable network port mirroring based on source port. Which feature should be enabled?___
A. vSphere standard switch port
B. ERSPAN
C. NSX Virtual Wire
D. VLAN
【单选题】
Which CLI command shows the physical uplink status for a vmnic?___
A. esxcli network ip connection list
B. esxcli network ip neighbor list
C. esxcli network nic get
D. esxcli network nic list
【单选题】
Which is the maximum number of block devices (LUNs) that are supported by ESXi hosts that are running version 6.5?___
A. 1024
B. 512
C. 2048
D. 256
【单选题】
When performing a vCenter Server 5.5 for Windows with Microsoft SQL Server Express database migration to vCenter Server Appliance 6.5, which will be the target database?___
A. Microsoft SQL Server Express 2012R2
B. Microsoft SQL Server Standard 2012R2
C. PostgreSQL
D. Oracle DB 11g
【单选题】
An administrator has multiple vCenter Server 6.5 systems but cannot enable Storage I/O Control (SIOC) on a datastore shared by ESXi hosts managed by the vCenter Server systems. Which action should the administrator take to resolve the issue?___
A. Unmount the datastore and then enable SIOC on the vCenter Server system.
B. Configure the datastore to be managed by a single vCenter Server system.
C. Configure Storage DRS and then enable SIOC on the vCenter Server system.
D. Enable Raw Device Mapping (RDM) on the
E. SXi hosts.
【单选题】
“OneAppServer” is a VM template stored in a content library named “LibraryOne”, but the vSphere administrator is not able to use this template for deployment. Why is the administrator unable to deploy OneAppServer?___
A. OneAppServer must be updated before it can be deployed.
B. LibraryOne is a subscribed library and OneAppServer is not downloaded yet.
C. LibraryOne is published and optimized for syncing over HTTP.
D. OneAppServer was imported from a local file on the system.
【单选题】
An administrator sets the Failover Capacity for both CPU and Memory at 25%. Based on the Exhibit below, how much of the cluster’s total CPU resources are still available to power on additional virtual machines?___
A. 45%
B. 25%
C. 70%
D. 60%
【单选题】
Which statement applies to the vSphere Replication appliance?___
A. Only one vSphere Replication appliance can be deployed per vCenter Server instance.
B. VMware Tools in the vSphere Replication appliance can be upgraded.
C. A single vSphere Replication appliance can manage a maximum of 4000 replications.
D. vSphere Replication is available only with the vSphere
E. ssentials Plus license.
【单选题】
Which esxcli namespace can a vSphere Administrator use to adjust the queue depth?___
A. esxcli system module parameters
B. esxcli storage core device
C. esxcli system module set
D. esxcli storage core adapter
【单选题】
Which statement regarding datastore clusters meets VMware’s recommended best practices?___
A. Clusters should contain only datastores presented from the same storage array.
B. Clusters should contain only datastores with equal hardware acceleration capability.
C. Clusters should contain only datastores with the same capacity.
D. Clusters should contain only datastores using the same connection method (iSCSI, FC, etc.).