【简答题】
Napoleon soon realized he could not feed, clothe, and quarter his army in Moscow during the winter. In October 1812, he ordered his Grand Army to retreat from Moscow.
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
拿破仑很快意识到,他无法在冬天向远在莫斯科的军队供应粮草、提供御寒衣物和宿营之地。1812年10月,他命令大军撤出莫斯科。
解析
暂无解析
相关试题
【简答题】
The French retreat turned into a nightmare. From fields and forests, the Russians launched hit-and-run attacks on the French. A short distance from Moscow, the temperature had already dropped to minus 4 degrees Celsius. On November 3, the winter's first snow came. Exhausted horses fell dead in their tracks. Cannon became stuck in the snow. Equipment had to be burned for fuel. Soldiers took ill and froze to death. The French soldiers dragged on, leaving the dead along every mile.
【简答题】
As the Russian army was gathering its strength, the French had to flee Russia to avoid certain defeat. At the Berezina River, the Russians nearly trapped the retreating French by burning the bridges over the swollen river. But Napoleon, by a stroke of luck, was able to build two new bridges. Thousands of French soldiers escaped, but at the cost of fifty thousand dead. Once across the Berezina, the tattered survivors limped toward Vilna.
【简答题】
Of the six hundred thousand soldiers Napoleon had led into Russia, less than one hundred thousand came back. The weakened French army continued its retreat westward across Europe. Soon, Britain, Austria, Russia, and Prussia formed a powerful alliance and attacked these stragglers. In March 1814, Paris was captured. Napoleon abdicated and went into exile, his empire at an end.
【简答题】
By early 1941, Adolf Hitler, leader of Nazi Germany, had seized control of most of Europe. To the east of Hitler's German empire was the Soviet Union. On June 22, 1941, without a declaration of war, Hitler began an invasion of the Soviet Union that was the largest military land campaign in history. Confident of a quick victory, Hitler expected the campaign to last no longer than three months. He planned to use the blitzkrieg, or "lightning war," tactics that had defeated the rest of Europe. The invasion had three broad thrusts: against Leningrad and Moscow and through the Ukraine.
【简答题】
Caught off guard by the invasion, Soviet leader Joseph Stalin instructed the Russian people to "scorch the earth" in front of the German invaders. Farms and factories were burned, destroyed, or rendered useless. During the first ten weeks of the invasion, the Germans pushed the front eastward, and the Russians suffered more than a million casualties.
【简答题】
In the north, the Germans closed in on Leningrad. Despite great suffering, however, the people of Leningrad refused to surrender. As the battle of Leningrad dragged on into winter, the city's situation became desperate. As food ran out, people died from hunger and disease. By the middle of the winter of 1941-1942, nearly four thousand people starved to death every day. Close to one million people died as a result of the siege.
【简答题】
In the center of Russia, Hitler's goal was the capture of Moscow. Because the Germans had anticipated a quick victory, they had made no plans for winter supplies. October arrived with heavy rains. "General Mud" slowed down the movement of the Germans' lightning attack.
【简答题】
As Hitler's armies drew closer and closer to Moscow, an early, severe winter settled over the Soviet Union, the harshest in years. Temperatures dropped to minus 48 degrees Celsius. Heavy snows fell. The German soldiers, completely unprepared for the Russian winter, froze in their light summer uniforms. The German tanks lay buried in the heavy snowbanks. The Russian winter brought the German offensive to a halt.
【简答题】
By the summer of 1942, Hitler had launched two new offensives. In the south, the Germans captured Sevastopol. Hitler then pushed east to Stalingrad, a great industrial city that stretched for 48 kilometers along the Volga River. Despite great suffering, Soviet defenders refused to give up Stalingrad.
【简答题】
In November 1942, the Russians launched a counterattack. With little or no shelter from the winter cold in and around Stalingrad, German troops were further weakened by a lack of food and supplies. Not until January 1943 did the Germans give up their siege. Of the three hundred thousand Germans attacking Stalingrad, only ninety thousand starving soldiers were left. The loss of the battle for Stalingrad finally turned the tide against Hitler. The German victories were over, thanks in part to the Russian winter.
【简答题】
During 1943 and 1944, the Soviet armies pushed the German front back toward the west. In the north, the Red Army broke the three-year siege of Leningrad with a surprise attack on January 15, 1944. Within two weeks, the heroic survivors of Leningrad saw their invaders depart. By March 1944, the Ukraine farming region was again in Soviet hands. On May 9, 1944, Sevastopol was liberated from the Germans. The Russians were now heading for Berlin.
【简答题】
For Hitler, the invasion of the Soviet Union had turned into a military disaster. For the Russian people, it brought unspeakable suffering. The total Soviet dead in World War II reached almost 23 million.
【简答题】
The elements of nature must be reckoned with in any military campaign. Napoleon and Hitler both underestimated the severity of the Russian winter. Snow, ice, and freezing temperatures took their toll on both invading armies. For the Russian people, the winter was an icy defender.
【单选题】
________不属于鼠类及体表寄生虫携带的病原体。___
A. 鼠疫耶尔森菌
B. 汉坦病毒
C. 黄病毒属病毒
D. 致病性钩端螺旋体
【单选题】
病媒生物死体样本运送,如果在24h内不能到达实验室的,运送过程中箱内温度应保持在_____。___
A. 4℃以下
B. 0℃以下
C. -20℃以下
D. 4℃以上
【单选题】
病媒生物死体样本运送,如果在装箱后4h内能够到达实验室的,运送过程中箱内温度应保持在______。___
A. 4℃以下
B. 0℃以下
C. -20℃以下
D. 4℃以上
【单选题】
病媒生物的死体样本运送,如果4h-24h内能到达实验室的,应将样品置于-30℃冷冻后再送样,运送过程中箱内温度应保持在________。___
A. 4℃以下
B. 0℃以下
C. -20℃以下
D. 4℃以上
【单选题】
恰加斯病也称为美洲锥虫病,其重要的传播媒介是________。___
A. 采采蝇
B. 厩螫蝇
C. 锥蝽
D. 埃及伊蚊
【单选题】
_______是黑热病内脏利什曼病的主要传播媒介。___
A. 锥蝽
B. 白蛉
C. 蠓
D. 蚋
【单选题】
对于用作虫媒病毒分离或检测的蚊类标本,现场采集后应采用_______方式处置和运送。___
A. 杀虫剂熏杀+常温运输
B. 等蚊虫自然死亡+常温运输
C. 冷冻处死+常温运输
D. 冷冻处死+冷冻状态运输
【单选题】
_______不适用于入出境集装箱携带蝇、蚊、蠓的采集。___
A. 挥网法
B. 电动吸蚊器法
C. 直接捡取法
D. 二氧化碳诱蚊灯法
【单选题】
入境航空器应在______开始病媒生物监测。___
A. 卸货完成后
B. 抵达后
C. 等航空公司通知
D. 发现病媒生物时
【单选题】
进行集装箱携带输入性病媒生物监测时应准备的个人防护用品包括______。___
A. 乳胶手套、防护服
B. 防毒面具
C. 自给式呼吸器
D. 化学防护服
【单选题】
若要对采集到的输入性鼠类进行携带的病毒进行检测,取得其内脏器官的保存温度是_____。___
A. -80℃或以下
B. 0℃
C. 常温
D. 4℃-8℃
【单选题】
截获输入性活鼠或来自鼠疫流行区死鼠及经总署专家组确认和复核属于全国口岸首次截获的病媒生物应在______报告总署。___
A. 2小时之内
B. 8小时之内
C. 12小时之内
D. 24小时之内
【单选题】
入境船舶的蚊类和蝇类等双翅目病媒生物监测调查应白天在检疫锚地停泊期间进行,锚位距陆地距离不少于______,或在船舶靠泊后_____内进行。___
A. 1000 m;1h
B. 800 m、2 h
C. 400 m、4 h
D. 100 m、24 h
【单选题】
开展入境船舶输入性病媒生物监测工作中,在采集并保存病媒生物时由________陪同人员确认。___
A. 旅行社
B. 船方
C. 代理公司
D. 海事部门
【单选题】
在国境口岸或者交通工具上发现______有反常死亡或者死因不明的,国境口岸有关单位或者交通工具的负责人,必须立即向卫生检疫机关报告,迅速查明原因,实施卫生处理。___
A. 蚊类
B. 鼠类
C. 蝇类
D. 蜚蠊
【单选题】
采用鼠夹法监测鼠密度,应连续布放______。___
A. 2天
B. 3天
C. 4天
D. 5天
【单选题】
______不属于口岸区域鼠类常用监测方法。___
A. 鼠笼法
B. 鼠夹法
C. 目测法
D. 粉迹法
【单选题】
采用粉迹法监测鼠类密度时,滑石粉块的尺寸是______。___
A. 20cm×20cm
B. 30cm×30cm
C. 40cm×40cm
D. 50cm×50cm
【单选题】
______不属于蚊虫幼虫监测指标。___
A. 容器指数
B. 刺叮指数
C. 房屋指数
D. 布雷图指数
【单选题】
______不属于蚊虫成虫监测方法。___
A. 人帐诱法
B. 人工小时法
C. 小黑板法
D. 诱蚊器收集法
【单选题】
______不属于蝇类成虫监测方法。___
A. 诱蝇笼诱捕法
B. 捕蝇网网捕法
C. 直接目测法
D. 路径指数法
【单选题】
啮齿动物的臼齿常具有_____。___
A. 1对
B. 2对
C. 3对
D. 4对
【单选题】
______是仓鼠科特征。___
A. 背部有背囊
B. 尾部有尾囊
C. 口中两侧有颊囊
D. 腹部腹面有腹囊
【单选题】
_______蜱类假头基通常为矩形。___
A. 花蜱属
B. 璃眼蜱属
C. 扇头蜱属
D. 异扇头蜱属
【单选题】
_________鉴别特征是:体型较大,前胸背板具褐色蝶形大斑,其后缘中央向后延伸不达后缘,且前缘具“T”型黄斑。___
A. 黑胸大蠊
B. 美洲大蠊
C. 德国小蠊
D. 褐斑大蠊
【单选题】
_________鉴别特征是:中胸侧板有垂直的侧板杆,无颊栉和前胸栉,后头鬃2列,前足第5跗节具3根刺形亚端腹鬃,受精囊为“C”型。___
A. 人蚤
B. 二齿新蚤
C. 印鼠客蚤
D. 犬栉首蚤
【单选题】
_______不属于栉眼蚤属。___
A. 云南栉眼蚤
B. 方叶栉眼蚤
C. 同源栉眼蚤指名亚种
D. 偏远古蚤
推荐试题
【填空题】
23127.___新产品开发管理主要对产品开发、产品设计和工艺、工装设计等技术活动的管理。
【填空题】
23128.___诚实劳动是劳动者立身处世的基本出发点。
【填空题】
23129.___柱塞泵按柱塞排列方向的不同,分为径向柱塞泵和切向柱塞泵两类。
【填空题】
23130.___高压软管比硬管安装方便,可以吸收振动。
【填空题】
23131.___水力半径越大越容易产生堵塞现象。
【填空题】
23132.___在振动检测过程中,传感器必须和被测物紧密接触。
【填空题】
23133.___蜗杆传动是用来传递空间交错轴之间的运动和动力。
【填空题】
23134.___压缩工具___是将文件数据进行一种重新的编码排列___,使之更少的占用磁盘空间。
【填空题】
23135.___测绘时,对零件上因制造中产生的缺陷,如铸件的砂眼,气孔等都应在草图上画
【填空题】
23136.___正确选择工件定位基准,应尽可能选用工序基准、设计基准作为定位基准。
【填空题】
23137.___数控机床的定位精度与数控机床的分辨率精度是一致的。
【填空题】
23138.___定位误差包括工艺误差和设计误差。
【填空题】
23139.___螺旋压板夹紧是一种应用最广泛的夹紧装置。
【填空题】
23140.___刀具预调仪是一种可预先调整和测量刀尖直径、装夹长度,并能将刀具数据输入
【填空题】
23141.___换刀方式为无机械手换刀时,必须首先将用过的刀具送回刀库,然后再从刀库中取出新刀具,这两个动作不可能同时进行,因此换刀时间长。
【填空题】
23142.___在发那克 0i 系统中,#i=ATAN[#j]/[#k]表示算术运算的反正切。
【填空题】
23143.___数控机床直流伺服电机要在 10 到 12 个月进行一次维护保养。
【填空题】
23144.___水平面上圆的正等测投影为椭圆,且椭圆长轴垂直于轴测轴 y。
【填空题】
23145.___CAXA 制造工程师只有“实体仿真”功能,没有其他加工仿真的方法。
【填空题】
23146.___CAXA 制造工程师“实体仿真”中,干涉检查里设置的刀具长度与实际刀具长度不一致,会直接影响实际加工结果。
【填空题】
23147.___参考点是机床上的一个固定点,与加工程序无关。
【填空题】
23148.___数控机床中 MDI 是机床诊断智能化的英文缩写。
【填空题】
23149.___从系统主菜单可以进入手动方式,自动方式也可以调用手动方式___。
【填空题】
23150.___采用工艺孔加工和检验斜孔的方法,精度较低,操作也麻烦。
【填空题】
23151.___在斜面上钻孔可选用圆弧刃多能钻头直接钻出。
【填空题】
23152.___圆周分度孔系是指平面上、圆柱面上、圆锥面上及圆弧面上的等分孔。
【填空题】
23153___由于汽轮机的零件复杂,目前在国内同行业中,均仍采用手工编制程序,还没有一套适合加工汽缸这类复杂零件的自动编程系统。
【填空题】
23154.___整体叶轮叶型的精加工与清根交线加工同时完成。
【填空题】
23155.___刮削内曲面时,乔刀的切削运动是螺纹运动。
【填空题】
23156.___内千分尺测量槽宽,宜取数次测量中的最大值。
【填空题】
23157.___一般铣削方槽时,宜选择端铣刀。
【填空题】
23158.___有沟槽的凸轮,其沟槽宽度实际上是理论曲线与实际轮廓线之间的距离。
【填空题】
23159.___内应力的重新分布会引起已加工完零件的相应变形,使零件丧失原有的加工精度。
【填空题】
23160.___以碳化钨刀具铣削不锈钢材料之切削速度约为中碳钢材料的 3 倍。
【填空题】
23161.___检查主轴机构的精度,不仅需检查静态条件下的精度,也需检查动态条件下的精
【填空题】
23162.___逻辑探针是电子电路检修工具之一,在探针上的灯泡不同的显示方式,来指示电
【填空题】
23163.___环行分配可用硬件或软件实现。
【填空题】
23164.___在大批大量生产中,工时定额根据经验估定。
【填空题】
23165.___职业道德的价值在于有利于协调职工之间及职工与领导之间的关系。
【填空题】
23166.___压力继电器是一种将电信号转换成油液的压力信号的电液控制元件。