【单选题】
对于内部系统产生的干扰,常用解决措施不包括( )
A. 如检查出是基站设备本身的问题的话,需更换相应基站设备组件
B. 检查天馈器件,对于松动的连接头,把他们拧紧,对于坏掉或者老化了的器件,进行更换
C. 修改频点,在共天馈系统中,由于2G一个小区可能采用多个频点,频点之间可能会互调产生干扰
D. 安排路测队伍排查干扰
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
D
解析
暂无解析
相关试题
【单选题】
每个用户的PDCCH能占用( )个CCE,这种情况我们称为聚合级别。
A. 1,2,8,16
B. 16,24,48,96
C. 1,2,4,8
D. 16,32,48,96
【单选题】
单从注册信令流程看,是否区分漫游或非漫游用户?( )
A. 不区分
B. 区分
【单选题】
下列不属于RF优化的主要工作内容有( )。
A. 优化无线数据业务
B. 优化无线信号覆盖
C. 切换问题优化
D. 优化无线信号质量
【单选题】
在TD-LTE无线网络中影响网络结构的因素有那些?( )
A. 以上都是
B. 站间距(站点拓扑关系)
C. 站高
D. 下倾角和方位角
【单选题】
AMR-NB编码采样率为( )。
A. 16Hz
B. 8kHz
C. 16kHz
D. 8Hz
【单选题】
I-CSCF在用户注册.注销时,I-CSCF向HSS查询为用户服务的S-CSCF时,采用的是下列哪一组消息( )
A. UDR/UDA
B. UAR/UAA
C. SAR/SAA
D. MAR/MAA
【单选题】
在下面哪个模式下,LTE手机可以执行TA更新?( )
A. URA_PCH
B. ECM-IDLE
C. EMM-DEREGISTERED
D. ECM-Connected
【单选题】
基于“开发者自行开发的服务端应用”的描述,指的是( )。
A. SoftRadio应用
B. 智能应用
C. 开发应用
D. 北向应用
【单选题】
NB-IoT小区定点测试时好点的定义是( )。
A. RSRP>-80dBm ,SINR>10
B. RSRP>-100dBm ,SINR>20
C. RSRP>-100dBm ,SINR>10
D. RSRP>-80dBm ,SINR>20
【单选题】
R13为NB-IoT指定了( )个频段。
A. 14
B. 3
C. 7
D. 5
【单选题】
CellID 信息在( ) 信号里面携带。
A. 以上答案都不对
B. NSSS
C. NPSSS和NSSS
D. NPSSS
【单选题】
独立部署模式下,NB-IoT覆盖能力最高可达到( )Db。
A. 174
B. 144
C. 164
D. 154
【单选题】
EN-DC中,MCG进行NR邻区测量使用的参考信号有( )。
A. DM-RS
B. SSB RS
C. C-RS
D. CSI-RS
【单选题】
Timing Advance Command MAC CE对应TA索引值的范围是( )。
A. 0~13
B. 0~63
C. 0~255
D. 0~3846
【单选题】
5G中单小区最大支持的PRB为( )。
A. 200PRB
B. 273PRB
C. 100PRB
D. 175PRB
【单选题】
我国提出的“5G之花”关键性能中,未被ITU接受的是:( )。
A. 成本效率
B. 用户体验速率
C. 能效
D. 流量密度
【单选题】
对于5G NR来说,一个无线帧占用多少毫秒?( )
A. 5
B. 10
C. 1
D. 不是固定的,和子载波带宽有关
【单选题】
M2M技术的核心理念是( ).
A. 智慧地球
B. 简单高效
C. 人工智能
D. 网络一切
【单选题】
毫米波的典型站距是( )。
A. 1000~5000米
B. 5~40米
C. 200~1000米
D. 40~200米
【单选题】
划分SUL频段的意义是:( )
A. 与5GHz搭配使用,补充下行覆盖范围
B. 增大上行数据传输速率
C. 与3.5GHz搭配使用,补充上行覆盖范围
D. 增大下行数据传输速率
【单选题】
5G单载波最大( )(<6GHz),单载波最大( )(>6GHz)
A. 50MHz,100MHz
B. 100MHz,200MHz
C. 100MHz,400MHz
D. 20MHz,100MHz
【单选题】
当以下 ( )设备的施主基站载波扩容时,应相应对其直放站进行扩容。
A. 宽带直放站
B. 频带选频直放站
C. 载波选频直放站
【单选题】
已知某个网络的掩码是 255.255.248.0,那么下面属于同一网段的是:( )。
A. 10.110.16.1和10.110.25.1
B. 10.33.23.2和 10.33.31.1
C. 10.52.57.34 和 10.52.62.2
D. 10.76.129.21和10.76.137.1
【单选题】
IPv6地址中不包括下列哪种类型的地址 ?( )
A. 广播地址
B. 组播地址
C. 单播地址
D. 任播地址
【单选题】
云计算的发展, 是以虚拟化技术为基础的 。( )
A. 正确
B. 错误
【单选题】
下述关于下行2*2 MIMO说法正确的是( )。
A. 2发是指UE端,2收也是指UE端
B. 2发是指eNodeB端,2收是指UE端
C. 2发是指eNodeB端,2收也是指eNodeB端。
D. 2发是指UE端,2收是指eNodeB端。
【单选题】
在对一个网络进行故障检测时,在同一个网络中ping另外一台主机,在该主机接收到ping请求后,会返回以下哪种类型的包?( )
A. ICMP响应应答
B. ICMP主机不可达
C. ICMP响应请求
D. ?ICMP端口不可达
【单选题】
在现阶段,LTE室内分布系统的信源以( )为主。
A. 分布式基站(BBU+RRU)或RRU
B. 干放
C. 光纤直放站
D. 无线直放站
【单选题】
PCI规划中需要尽量满足( )原则。
A. 模4
B. 模3
C. 模2
D. 模5
【单选题】
AMR-WB总共支持( )种模式。
A. 8
B. 7
C. 6
D. 9
【单选题】
LTE FDD中,A1事件是指( )。
A. 邻区好于服务小区一个偏置
B. 服务小区差于门限
C. 服务区小区好于门限
D. 服务小区差于门限1,且邻区好于门限2
【单选题】
LTE路测指标中的掉线率指标表述不正确的是:( )。
A. 掉线率指业务进行过程中发生业务异常中断的概率,即异常中断的次数与总业务进行次数之比。
B. 掉线指:在终端正常进行数据传送过程中数据传送发生异常中断,包括RRC连接异常中断、或数据速率降为0并持续5秒。
C. 掉线率=掉线次数/成功完成连接建立次数
D. 掉线是指在手机没主发Disconnect信令或没收到网络下发Disconnect/Release信令情况下,手机回到idle状态,则视为一次掉话。
【单选题】
从路测数据分析,UE收到/发出下述哪条消息表明RRC连接建立成功?( )
A. Random Access Request
B. rrcConnectionSetupComplete
C. rrcConnectionRequest
D. Random Access Response
【单选题】
LTE/ECP网络的去附着流程可由什么实体发起?( )
A. HSS
B. MME
C. UE
D. 以上都对
【单选题】
在MIMO模式,哪个因素对数据流量影响最大?( )
A. 发射和接收端的最小天线数目
B. 天线高度
C. 天线尺寸
D. 天线型号
【单选题】
关于小区搜索,以下描述错误的是( )
A. SSS位于5ms第一个子帧的最后一个符号
B. PSS位于DwPTS的第二个符号
C. 小区搜索过程是UE和小区取得时间和频率同步,并检测小区ID的过程
D. 根据PBCH的内容可以得到系统帧号和带宽信息
【单选题】
双路室分系统中可采用以下( )传输模式。
A. TM7
B. TM2
C. TM1
D. TM8
【单选题】
VoLTE由( )提供高质量的分组域承载。
A. IMS?
B. SGSN?
C. MME?
D. EPC?
【单选题】
LTE FDD中,A2事件是指( )。
A. 邻区好于服务小区一个偏置
B. 服务小区差于门限
C. 服务区小区好于门限
D. 服务小区差于门限1,且邻区好于门限2
【单选题】
LTE覆盖指标RS信号SINR的定义和解读,下列选项错误的是:( )。
A. 一般将SINR中的S也认为是有用信号功率,则SINR等效于CINR;
B. 邻区和服务小区的PCI模3不等,那么它们的RS就在频域上不重叠;
C. RSSINR是信号能量除以噪声的能量的比值;
D. RS-SINR与网络负荷相关,负荷越高RS-SINR值越低
推荐试题
【单选题】
An administrator is attempting to restore a number of files in a directory within the Operating System of a virtual machine. How can the administrator restore the files from a previous backup? ___
A. Use the File Level Restore option from the selected backup of the virtual machine in the vSphere Web Client.
B. Connect to the File Level Restore tool from a web browser in the virtual machine.
C. Connect to the File Level Restore tool from the VMware
D. ata Protection appliance.
【单选题】
After selecting an object in vRealize Operations, how can a user compare the badge values of related child objects? ___
A. Use the Scoreboard tab
B. Use the Relationship tab
C. Use the Members tab
D. Use the Overview tab
【单选题】
You want to deploy a vApp and dynamically assign IP addresses without a DHCP server on the network. Which action would you take to accomplish this task? ___
A. Enable IP pools.
B. Configure a local DHCP server in the vApp.
C. Enable NAT on the vApp router.
D. Configure the guest OS for workgroup and WINS.
【单选题】
What is the optimal configuration when building a virtual machine for a single-threaded Windows application? ___
A. Deploy single-threaded applications on uniprocessor virtual machines.
B. Deploy single-threaded applications on symmetric multi-processor virtual machines.
C. Tune single-threaded applications to take advantage of symmetric multi-processor resources.
D. Tune Single-threaded applications at the hypervisor level.
【单选题】
An administrator has created the resource pool configuration shown in the Exhibit. Based on the exhibit, which virtual machine(s) can be successfully powered on? ___
A. VM-M1 only
B. VM-K1 only
C. VM-K1 and VM-K2 only
D. VM-K1, VM-K2, and VM-M1
【单选题】
Which vSphere 6 Enterprise Edition feature will allow an organization to ensure that critical multi-threaded applications have the maximum possible uptime? ___
A. Fault Tolerance
B. High Availability
C. Distributed Resource Scheduler
D. App HA
【单选题】
An administrator has a virtual machine that requires four times the compute resources than other virtual machines on the same ESXi 6.x host. How should the administrator configure the virtual machine settings, in order to be prepared for any resource contention? ___
A. Set the shares of the priority virtual machine to High and the rest to Low.
B. Set the shares of the priority virtual machine to High.
C. Set the shares of the priority virtual machine to High and the rest to Normal.
D. Set the shares of the priority virtual machine to Normal and the rest to Low.
【单选题】
Which type of Adapter does not require vmkernel networking? ___
A. Independent Hardware iSCSI Adapter
B. Dependent Hardware iSCSI Adapter
C. Software iSCSI Adapter
D. Software FCoE Adapter
【单选题】
During the installation of ESXi 6.0, the following error message is reported: Hardware Virtualization is not a feature of the CPU, or is not enabled in the BIOS. Which condition would generate this message? ___
A. LAHF/SAHF is not enabled in the BIOS.
B. NX/XD is not enabled in the BIOS.
C. SSE3 is not enabled in the BIOS.
D. Hyperthreading is not enabled in the BIOS.
【单选题】
An administrator is unable to login to vCenter Server when using the vSphere web client. The administrator successfully accessed vCenter Server using the client earlier the same day. What is the most appropriate first step the administrator should take to resolve this issue? ___
A. Verify the web browser being used has Adobe Flash plugin version 11.5 or later
B. Verify the vCenter Single Sign-On service is running on the vCenter Server
C. Verify the vSphere Web Server service is running on the vCenter Server
D. Verify the administrator has permissions configured in vCenter Server
【单选题】
An administrator has configured an alarm to be notified when a virtual machine meets two conditions: <high virtual CPU> <high active memory consumption> The alarm is malfunctioning and triggering when either condition is met instead of both. What can be done to correct the issue? ___
A. Edit the alarm and select Trigger if ALL of the following conditions are satisfied.
B. Edit the alarm and select Trigger if ANY of the following conditions are satisfied.
C. Create two separate alarms, one for CPU and one for memory.
D. Delete the existing alarm and create a new event based alarm.
【单选题】
What must be enabled to ensure that VM Component Protection (VMCP) works in a High Availability cluster? ___
A. VMware Tools Virtual Machine Communication Interface (VMCI)
B. Fault Tolerance
C. Atomic Test and Set (ATS)
D. All Paths Down (APD) Timeout
【单选题】
An administrator wants to add a web server to an existing multi-tier application consisting of three virtual machines: <A web server> <A database server An application server> The web server should be added to the application when the primary web server reaches: <70% vCPU utilization> <55% active memory> Which option will achieve this result? ___
A. Create a virtual machine alarm with an action to run a script that starts a new instance of the web server.
B. Create a host cpu and memory alarm with an action to run a script that starts a new instance of the webserver.
C. Configure HA application monitoring for the web server and set it to trigger deployment of a new instance of the web server.
D. Configure Fault Tolerance on the virtual machine and leave the secondary machine disabled until needed.
【单选题】
An administrator has an application that requires connection directly to PCI devices through a virtual machine. What is a limitation of this configuration? ___
A. Devices must be reserved for PCI passthrough on at least one host on which the virtual machine will run.
B. Snapshots are not supported with DirectPath I/O passthrough devices.
C. A maximum of 18 PCI vSphere
D. irectPath devices can be added to a virtual machine.
【单选题】
The vSphere administrator is configuring directory services for an ESXi host: What should the vSphere administrator do to configure the host to use CAM services? ___
A. Check the Use vSphere Authentication Proxy checkbox.
B. Set Select Directory Service Type to CAM services.
C. Specify CAM$ for the
D. omain.
【单选题】
Which statement is true regarding the licensing of vCenter Server? ___
A. The license for vCenter Server must be provided at the time of installation.
B. Changing the license assigned to vCenter Server requires a restart of the vCenter Server service.
C. Virtual machines can still be powered on if the vCenter Server license expires.
D. Licensing for a single vCenter Server installation is determined by the number of managed virtual machines.
【单选题】
When configuring vSphere Replication for a virtual machine, what is the lowest Recovery Point Objective (RPO) that can be selected? ___
A. 1 min
B. 5 min
C. 10 min
D. 15min
【单选题】
A developer needs to create a multi-tier development stack for a home lab. Which vSphere product will support the architecture required for the least software cost? ___
A. vSphere Hypervisor
B. vSphere Essentials
C. VMware Player
D. VMware Workstation
【单选题】
An administrator is installing Windows into a virtual machine. The DVD has been mounted on the Host and configured for the virtual machine as shown in the Exhibit. Based on the exhibit, when the virtual machine is booted, why would it attempt to search for a PXE server? ___
A. The CD/DVD device is not connected.
B. The ISO is in the incorrect storage location.
C. The OS minimum requirements have not been met.
D. The CD/DVD device is not set to Client Device.
【单选题】
What component must be installed prior to deploying a vCenter Server in vSphere 6.x? ___
A. vCenter Identity Services
B. Platform Services Controller
C. vCenter Single Sign-On
D. Client Integration Plug-In
【单选题】
What is a valid plug-in status for a plug-in that has been added to a vSphere client? ___
A. Disabled
B. Unknown
C. Stopped
D. Installed
【单选题】
Users of an application are reporting performance issues. The following performance values are observed in the vSphere Web Client: <Host CPU utilization is 90%> <Virtual Machine memory utilization is consistently greater than 90% CPU Ready values are higher than 20%> What could be the cause of the application performance issue? ___
A. The host is lacking the CPU resources required to meet the demand.
B. The host is lacking the memory resources required to meet the demand.
C. The virtual machine is lacking the CPU resources required to meet the demand.
D. The virtual machine is lacking the memory resources required to meet the demand.
【单选题】
An administrator creates an ESXi cluster using vSphere Auto Deploy. The ESXi hosts are configured to get a management IP address from a DHCP server. The administrator needs to troubleshoot the management network on one of the hosts. Which DCUI option should the administrator use to renew the DHCP lease? ___
A. Restart Management Network
B. Restore Network Settings
C. Test Management Network
D. Configure Management Network
【单选题】
An administrator is re-provisioning an ESXi host and moving it to another datacenter. Which DCUI option should the administrator use to revert the system configuration to the default settings? ___
A. Reset System Configuration
B. Rebuild Default System Configuration
C. Revert System Configuration
D. Renew Default System Configuration
【单选题】
An administrator has just completed installing an ESXi 6.x host, but doesn't know what address has been configured. Where is the ESXi host IP address configured? ___
A. RVC console
B. Direct Console User Interface
C. vSphere Web Client
D. vSphere Client
【单选题】
When is it possible to place a VMFS5 datastore in maintenance mode? ___
A. When it is a member of a Storage DRS cluster
B. When it is a member of Virtual SAN cluster
C. When it is a member of a multi-extent datastore
D. When it is a member of a Virtual Volume
【单选题】
Immediately after installing ESXi, an administrator observes that the Configure Lockdown Mode option is grayed out in the Direct Console User Interface (DCUI). What is the most likely explanation? ___
A. The host has not yet been added to a vCenter Server.
B. The BIOS on the host does not have NX/XD enabled.
C. The ESXi host is running in evaluation mode.
D. The host requires a reboot before this feature is available.
【单选题】
Immediately after installing ESXi, an administrator observes that the Configure Lockdown Mode option is grayed out in the Direct Console User Interface (DCUI). What is the most likely explanation? ___
A. The host has not yet been added to a vCenter Server.
B. The BIOS on the host does not have NX/XD enabled.
C. The ESXi host is running in evaluation mode.
D. The host requires a reboot before this feature is available.
【单选题】
Which Single Sign-On deployment mode should an administrator use for two 6.x vCenter Servers configured with linked mode? ___
A. Basic Single Sign-On with vCenter Server Heartbeat
B. Multisite Single Sign-On
C. Basic Single Sign-On
D. Single Sign-On with Linked Mode
【单选题】
What is required when changing a virtual machine name using the vSphere Web Client? ___
A. Verify connectivity to the ESXi host where the virtual machine is running and its inventory list is accessible.
B. Verify in which datastore the virtual machine resides and that you have access and its inventory list is accessible.
C. Verify that virtual machine files are stored in the same datastore and can be accessed in the datastore browser list.
D. Verify the virtual machine is not running in Fault Tolerant mode and that it is not in a Distributed Resource Scheduler cluster.
【单选题】
An administrator deploys vRealize Operations into a vSphere 6.x environment. After the deployment, the administrator notices that badges are not appearing. What is a likely cause of this behavior? ___
A. Badges do not appear until you register vRealize Operations with vCenter Server.
B. Badges do not appear until you register a vCenter Server in vRealize Operations.
C. The vRealize Operations appliance needs to be redeployed.
D. The vCenter Server appliance needs to be redeployed.
【单选题】
How are ports scaled on vSphere Standard Switches (vSS)? ___
A. Ports on a vSS can be dynamically scaled up and down.
B. Ports on a vSS can only be statically scaled up or down.
C. Ports on a vSS can only be dynamically scaled down.
D. Ports on a vSS can only be dynamically scaled up.
【单选题】
A High Availability (HA) cluster is configured to respond to a given number of host failures. The cluster contains virtual machines configured with these settings: VM1 has a 1GHz CPU reservation and no Memory reservation VM2 has a 2GHz CPU reservation and no Memory reservation VM3 has no CPU reservation and no Memory reservation . Given this information, what is the correct slot size for the cluster? ___
A. The CPU Reservation should be set to 32MHz and the memory reservation should be set to 32MB plus memory overhead.
B. The CPU reservation should be set to 1 GHz and the memory reservation should be set to 0MB plus memory overhead.
C. The CPU reservation should be set to 2 GHz, and the memory reservation should be set to 0MB plus the virtual machine memory overhead.
D. The CPU reservation should be set to 2 GHz, and the memory reservation should be set to 32MB, plus the virtual machine memory overhead.
【单选题】
An administrator is planning a vSphere infrastructure with the following specific networking requirements: <The ability to shape inbound (RX) traffic> <Support for Private VLANs (PVLANs)> <Support for LLDP (Link Layer Discovery Protocol)>. What is the minimum vSphere Edition that will support these requirements? ___
A. vSphere Essentials Plus
B. vSphere Standard
C. vSphere Enterprise
D. vSphere
E. nterprise Plus
【单选题】
When you add an ESXi 6.x host to a new Cluster, which vSphere object owns the CPU and Memory resources of the hosts? ___
A. vCenter Server
B. Datacenter
C. Cluster
D. Host
【单选题】
A user is trying to retrieve objects from a SharePoint server and finds the request is taking an excessive amount of time. An administrator tries to isolate the issue and notes the following: Application performance is poor when compared to virtual machines on other hosts. Performance improves when the virtual machine is moved to another host. The virtual machine encounters higher than expected CPU %Ready times. What conclusion can be reached regarding the performance issues for this virtual machine? ___
A. Host Power Management is directly impacting virtual machine performance.
B. The virtual machine has a large number of snapshots.
C. The Path Selection Policy for the storage device is set differently on the affected host.
D. Network I/O control is configured for the portgroup.
【单选题】
A virtual machine template is accidently removed from the vCenter Server Inventory. Which method would be used to recover the template back into the environment?___
A. Use the datastore browser to locate the template, then right click and add the .vmtx file to inventory.
B. Use the datastore browser to locate the template, then right click and add the .vmx file to inventory.
C. Using the Managed Object Browser and adding the template from the ManagedObjectReference:GuestFileManager object.
D. Using the Managed Object Browser and adding the template from the ManagedObjectReference:VirtualDiskManager object.
【单选题】
A vSphere administrator needs to backup a virtual machine that has a Microsoft SQL Server Database installed. Which solution allows for an application quiesce to occur during backup?___
A. VMware vCenter Converter
B. VMware vCenter Site Recovery Manager
C. VMware vSphere Replication
D. VMware vSphere Data Protection Advanced
【单选题】
An administrator is migrating a virtual machine from a Test cluster to a Production cluster. The two environments do not have any shared storage. What is the easiest way to accomplish this task? ___
A. Perform a Storage vMotion.
B. Perform a regular vMotion.
C. Perform a Virtual to Virtual migration.
D. Perform a backup and restore using VMware Data Protection.
【单选题】
An administrator must determine an appropriate backup solution, given these conditions: 50 of the virtual machines are in a resource pool named Finance. 50 of the virtual machines are in a resource pool named QA. Which solution allows an administrator the ability to backup 100 virtual machines? ___
A. Use Snapshot Manager on the vCenter Server to backup the virtual machines.
B. Use the VMware Consolidated Backup (vcb) tool on the ESXi Host to backup the virtual machines.
C. Use the VMware Data Recovery (VDR) Appliance on the vCenter Server to backup the virtual machines.
D. Use the VMware Data Protection (VDP) Appliance on one of the
E. SXi Hosts to backup the virtual machines.