【单选题】
The standard altimeter setting is______inhpa. ___
A. 1013.20062
B. 1010.10062
C. 29.92002
D. 30.10002
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
A
解析
暂无解析
相关试题
【单选题】
2500f/m rate of vertical speed is equal to______.___
A. 10m/s
B. 15m/s
C. 20m/s
D. 25m/s
【单选题】
陆空通话时,什么时候推荐使用“IMMEDIATELY(立即)”这个词:___
A. 相对飞行穿高度时
B. 天气差时,担心自己会忘记某个正在改变高度的动态
C. 飞机多时,为了节省精力
D. 在紧急情况下,用于冲突解脱时
【单选题】
Standard rate for a turning is______degrees per second. ___
A. 4
B. 6
C. 3
D. 2
【单选题】
What is the best course of action for a pilot to follow when thunderstorms are observed along the route of flight? ___
A. Fly below the thunderstorms
B. Climb over the thunderstorms
C. Disregard the thunderstorms
D. Take any action to avoid all thunderstorms
【单选题】
The subdivision of frequencies is______MHZ. ___
A. 0.025
B. 0.035
C. 0.02
D. 0.015
【单选题】
Aeronautical chart is divided into two categories,______. ___
A. Aeronautical map and special type of aeronautical chart
B. En-route chart and approach chart
C. Area chart and standard instrument arrival and departure chart
D. Aerodrome chart and area chart
【单选题】
Aircraft are required to comply with ATC instructions within______.___
A. advisory airspace
B. domestic airspace
C. controlled airspace
D. international airspace
【单选题】
Amendments to the initial clearance will be issued at anytime an air traffic controller deems such action necessary to______.___
A. avoid possible confliction between aircraft
B. correct the previously issued clearance
C. cancel the flight plan
D. expedite the traffic
【单选题】
研究表明,当耳机话筒的位置距离嘴( )英寸且稍微偏下时,传输的声音质量最佳。(注:1英寸=2.54CM)___
A. 0.25-0.5
B. 0.75-1
C. 1.25-1.5
D. 1.75-2
【单选题】
“I want to divert to shanghai” is equal to______.___
A. I want to our destination Shanghai
B. I want to overfly Shanghai
C. I want to alternate to land at Shanghai
D. I want to call Shanghai control
【单选题】
When an aircraft is being subjected to unlawful interference, the pilot should try to notify _______ of this fact.___
A. the appropriate ATC units
B. company
C. the passengers on board
D. air attendants
【单选题】
When pilot say“Did you pick it upon your screen?”,that means______.___
A. did you pick up your screen?
B. did you see it on your screen?
C. did your screen pick me up?
D. did you change your radar?
【单选题】
ATC clearance does not contain______.___
A. clearance limit
B. altitude data
C. route of flight
D. flight direction
【单选题】
When pilot sets an altimeter setting to a QNH,that will indicate_________
A. flight level
B. altitude
C. height
D. safety level
【单选题】
When pilots set a pressure of 29.92 in mercury to indicate_________
A. altitude
B. height
C. flight level
D. safety level
【单选题】
管制员还应当对管制指令当中的不同内容进行适当的排序,相对重要的内容应当排列在管制指令的 ( )位置___
A. 前面
B. 中间
C. 尾部
D. 以上都可以
【单选题】
When Beijing time is 0801,Zulu time should be______.___
A. 2001
B. 1
C. 601
D. 1601
【单选题】
Emergency frequency is______.___
A. 121.5MHZ
B. 120.5MHZ
C. 121MHZ
D. 119.0MHZ
【单选题】
“PAN” is the international RTF______signal___
A. emergency
B. distress
C. urgency
D. dangerous
【单选题】
“MAYDAY” is the international RTF______signal.___
A. emergency
B. distress
C. urgency
D. dangerous
【单选题】
According to ICAO definition, a condition concerning the safety of an aircraft or other vehicle or of some person on board or within sight but which does not require immediate assistance is _______ .___
A. urgency
B. dangerous
C. emergency
D. distress
【单选题】
Which SSR Code is not right?___
A. 7020
B. 8025
C. 6060
D. 4021
【单选题】
______is the accepted standard for worldwide time signal broadcast used for aviation.___
A. GMT
B. LT
C. UTC
D. SST
【单选题】
_____means the level is measured in 1013.2 pha___
A. Level
B. Height
C. Altitude
D. Flight level
【单选题】
An aircraft known or believed to be in a state of emergency should be given______over other aircraft.___
A. way
B. flight plan
C. instruction
D. priority
【单选题】
管制话筒正确使用方法是:___
A. PTT发射键还没有完全按下时就开始发指令
B. 指令还没有结束就松开PTT发射键
C. 按PTT发射键与发话同时进行,松开PTT发射键与发话同时进行
D. 先按下话筒PTT发射键,然后再开始对空发话,发话完毕后再松开话筒PTT发射键
【单选题】
SSR code is a______digital number.___
A. two
B. six
C. one
D. four
【单选题】
Traffic information should include_________
A. direction of aircraft concerned
B. weather
C. speed of aircraft
D. heading of aircraft
【单选题】
根据区管中心业务通告,管制员通知机组转换频率的管制指令应当与其他管制指令( )。___
A. 分开发布
B. 同时发布
C. 无特别要求
【单选题】
20NM is equal to.___
A. 40km
B. 38km
C. 37km
D. 41km
【单选题】
The altimeter setting used in en-route flight should be______hpa___
A. 1019
B. 1013
C. 2992
D. 1000
【单选题】
Larger separations than the specified minima should be applied whenever in.___
A. turbulence
B. bad weather
C. a raining day
D. highlevel
【单选题】
_______is air traffic control service for controlled flights in control areas___
A. Route service
B. En-route fly service
C. Area control service
D. Deviation control service
【单选题】
_______ is a service provided to notify appropriate organizations regarding aircraft in need of search and rescue aid, and assist such organizations as required.___
A. alerting service
B. information service
C. rescue service
D. assistance service
【单选题】
Visibility is the ability as determined by atmospheric conditions and expressed in unit______.___
A. meters
B. feet
C. distance
D. odometer
【单选题】
SIGMET is a weather advisory issued concerning weather______to the safety of all aircraft.___
A. significant
B. changeable
C. information
D. condition
【单选题】
Flight level is a______of constant atmospheric pressure which is related to a specific pressure datum 1013.2hpa.___
A. standard
B. surface
C. height
D. number
【单选题】
Air traffic means all aircraft in flight or operating on the______of an aerodrome.___
A. highway
B. hanger
C. maneuvering area
D. terminal
【单选题】
The true airspeed is the airspeed of an aircraft relative to______air.___
A. turbulence
B. smooth
C. undisturbed
D. the
【单选题】
Air speed is the speed of an aircraft relative to its surrounding______.___
A. traffic
B. airmass
C. clouds
D. wind
推荐试题
【单选题】
下列有关检验批验收程序和组织的说法错误的是___。
A. 检验批是基本验收单元
B. 检验批验收由监理工程师组织
C. 检验批验收数量按有关规范执行
D. 检验批验收中主控项目必须合格
【单选题】
下列有关分部工程质量验收合格规定的说法错误的是___。
A. 所包含的分项工程均应验收合格
B. 施工质量控制资料应完整
C. 观感质量验收应符合要求
D. 主要功能项目的抽查结果应符合要求
【单选题】
用直方图进行工程质量统计分析时,如果质量特性数据分布___,说明质量能力偏大,不经济。
A. 宽度边界达到标准上下界
B. 居中且距上下界有较大距离
C. 一边到达边界一边距边界较远
D. 出现两个数据高峰
【单选题】
扣件式钢管脚手架(装修脚手架)施工均布荷载标准值应取为___。
A. 2.0kN/mm2
B. 2.5kN/mm2
C. 3.0kN/mm2
D. 3.5kN/mm2
【单选题】
二力平衡原理是指___
A. 作用在物体上的两个力一定是平衡力
B. 等值.反向且共线的两个力是平衡力
C. 使物体平衡的一定是两个力
D. 使物体平衡的两个力一定是等值,反向且共线的
【单选题】
土的天然含水量增大时,其塑性指数___。
A. 随之增大
B. 与之无关
C. 随之减少
D. 先增加后减少
【单选题】
关于建筑施工图尺寸标注,下列说法不合理的是___。
A. 尺寸可分为总尺寸.定位尺寸.细部尺寸
B. 平屋面可标注结构标高,并应进行说明
C. 梁式悬挂起重机宜标出轨距尺寸
D. 有起重机的厂房剖面图可不标注屋架下玄杆件下边缘或屋面梁底.板底标高
【单选题】
梁平法施工图的平面注写方式包括集中标注和___。
A. 标准标准
B. 原位标注
C. 分散标注
D. 结构标注
【单选题】
当井字梁的梁顶标高不高于板面标高时,在梁平法结构施工图中的井字梁用___表示。
A. 单粗虚线
B. 单粗实线
C. 双粗虚线
D. 双粗实线
【单选题】
钢筋混凝土楼板结构施工图中的楼板构造类型编号Crs___。
A. 纵筋加强带
B. 后浇带
C. 角部加强筋
D. 抗冲切筋
【单选题】
建筑物的轴线尺寸是指___。
A. 实际尺寸
B. 构造尺寸
C. 标志尺寸
D. 标准尺寸
【单选题】
民用建筑按设计使用年限分为___类。
A. 四
B. 三
C. 五
D. 二
【单选题】
基础埋置深度是指___的距离。
A. 首层室内地面标高到基础底面标高
B. 设计室外地面标高到基础底面标高
C. 首层室内地面标高到基础顶面标高
D. 设计室外地面标高到基础顶面标高
【单选题】
附加圈梁与圈梁的搭接长度不应小于其___。
A. 垂直间距的2倍,且不得小于2.0m
B. 垂直间距的1.5倍,且不得小于1.0m
C. 垂直间距的1.5倍,且不得小于2.0m
D. 垂直间距的2倍,且不得小于1.0m
【单选题】
单层工业厂房的建筑跨度不超过18m时,应采用扩大模数___数列。
A. 30M
B. 60M
C. 10M
D. 90M
【单选题】
为了消除过火石灰的危害,可采取的措施是___。
A. 消化
B. 煅烧
C. 陈伏
D. 硬化
【单选题】
承重结构的钢材宜采用Q235钢.Q390钢.___.Q420钢。
A. Q345钢
B. Q195钢
C. Q275钢
D. Q215钢
【单选题】
沥青的塑性的指标用___表示。
A. 针入度
B. 标准粘度
C. 软化点
D. 延度
【单选题】
___的三要素是大小.方向.作用点。
A. 力偶
B. 力
C. 内力
D. 力矩
【单选题】
工程中,梁的刚度校核时一般只验算梁的___。
A. 挠度
B. 转角
C. 长度
D. 截面尺寸
【单选题】
一端固定一端自由时,等截面压杆的长度系数取___。
A. 0.5
B. 0.7
C. 1
D. 2
【单选题】
在水准测量中,起传递高程作用的点称为___。
A. 水准点
B. 测站
C. 转点
D. 图根点
【单选题】
用光学经纬仪观测某竖直角,盘左时读数96°26′38″,盘右时读数为263°34′06″,则该竖直角的测回竖角值为___。
A. -6°26′38″
B. -6°25′54″
C. -6°26′16″
D. -6°25′38″
【单选题】
在混凝土结构的承载能力极限状态设计中,不包括___。
A. 结构的倾覆验算
B. 结构的失稳验算
C. 混凝土的拉应力验算
D. 结构的漂浮验算
【单选题】
装配式钢筋混凝土空心板在砖墙上的支承长度不宜小于___。
A. 120mm
B. 100mm
C. 90mm
D. 80mm
【单选题】
比例的大小,是指其___的大小。
A. 数值
B. 比值
C. 结果
D. 比较
【单选题】
在一图幅内,当确定粗线线宽为1.4mm时,其细线的线宽应当是___。
A. 1mm
B. 0.7mm
C. 0.5mm
D. 0.35mm
【单选题】
确定平面图形各组成部分相对位置的尺寸称为___。
A. 基本尺寸
B. 定形尺寸
C. 定位尺寸
D. 总体尺寸
【单选题】
建筑平面图是采用一假想的___以上位置切开,将上部移去后所得的视图。
A. 水平剖切面沿基础顶面
B. 水平剖切面沿楼地面
C. 垂直剖切面沿高度
D. 水平剖切面沿窗台
【单选题】
在住宅建筑中,当底层墙体与顶层墙体厚度相同时,平面定位轴线与外墙内缘距离应为___。
A. 80mm
B. 100mm
C. 120mm
D. 240mm
【单选题】
当预制空心板搁置在墙上时,其搁置长度不得小于___。
A. 60mm
B. 80mm
C. 100mm
D. 120mm
【单选题】
用标准砖砌筑墙体时,其墙段长度应是___。
A. (125n+10)mm
B. (125n-10)mm
C. (115n+10)mm
D. (115n-10)mm
【单选题】
楼梯栏杆扶手是梯段的安全设施,楼梯扶手高度___。
A. 自踏步量起
B. 自踏步中心量起
C. 自踏步防滑条处量起
D. 自踏步前缘量起
【单选题】
单层厂房的___是确定厂房主要承重构件标志尺寸及相互位置的基准线,同时也是厂房设备安装及施工放线的依据。
A. 跨度
B. 柱距
C. 柱网尺寸
D. 定位轴线
【单选题】
确定单层厂房跨度的尺寸时,应符合模数协调的标准,当厂房跨度≤18m时,跨度尺寸应取扩大模数___数列。
A. 12 M
B. 15 M
C. 30 M
D. 60 M
【单选题】
材料的密度、表观密度、堆积密度之间的大小关系是___
A. 密度>堆积密度>表观密度
B. 堆积密度>密度>表观密度
C. 密度>表观密度>堆积密度
D. 堆积密度>表观密度>密度
【单选题】
地面上有A、B两点,若A点高程为49.278m,A、B两点间的高差hAB=-2.531m,则B点的高程HB为___
A. 46.747m
B. 51.809m
C. 51.747m
D. 46.809m
【单选题】
如图所示,该图示比例尺所表示的是___。
A. 1:1000
B. 1:2000
C. 1:5000
D. 1:500
【单选题】
建筑结构的设计极限状态包括___。
A. 承载能力极限状态、正常使用极限状态
B. 强度极限状态、正常使用极限状态
C. 承载能力极限状态、稳定极限状态
D. 抗力极限状态、作用极限状态
【单选题】
梁腹高度时,在梁的两侧面应设置腰筋,其间距不宜大于___。
A. 200mm
B. 200~300mm
C. 300mm
D. 300~400mm