【多选题】
关于依法治国与以德治国的关系,下列说法正确的有___。
A. 法律是成文的道德,道德是内心的法律
B. 要强化道德对法治的支撑作用
C. 要把道德要求贯彻到法治建设之中
D. 要用法治手段解决道德领域突出问题
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
ABCD
解析
暂无解析
相关试题
【多选题】
坚持全面从严治党,必须___,统筹推进党的各项建设,不断增强党的执政能力。
A. 以党章为根本遵循
B. 把党的政治建设摆在首位
C. 思想建党和制度治党同向发力
D. 抓住“关键少数”
E. 以宪法为准绳
【多选题】
党的十九大报告提出,夺取反腐败斗争压倒性胜利,要坚持___,坚持重遏制、强高压、长震慑,坚持受贿行贿一起查,坚决防止党内形成利益集团。
A. 无禁区
B. 全覆盖
C. 零容忍
D. 广覆盖
【多选题】
党对统一战线的领导主要是政治领导,即___的领导,主要体现为党委领导不是部门领导、集体领导而不是个人领导。
A. 政治原则
B. 政治方向
C. 重大方针政策
D. 具体工作
【多选题】
党的纪律主要包括政治纪律、组织纪律、___、工作纪律和生活纪律。
A. 廉洁纪律
B. 干部纪律
C. 作风纪律
D. 群众纪律
【单选题】
The two main islands of the British Isles are .
A. A. Great Britain and Ireland
B. B. Great Britain and Scotland
C. C. Great Britain and Wales
D. D. Great Britain and England
【单选题】
2. is the capital city of Scotland.
A. A. Belfast
B. B. Edinburgh
C. C. Aberdeen
D. D. Cardiff
【单选题】
According to a 2005 estimate, Britain now has a population of over million.
A. A. 160
B. B. 600
C. C. 60
D. D. 16
【单选题】
Among the four parts of the United Kingdom, is the smallest.
A. A. England
B. B. Scotland
C. C. Wales
D. D. Northern Ireland
【单选题】
Almost a quarter of the British population lives in England.
A. A. northeastern
B. B. southeastern
C. C. northwestern
D. D. southwestern
【单选题】
English belongs to the group of Indo-European family of languages.
A. A. Celtic
B. B. Indo-Iranian
C. C. Germanic
D. D. Roman
【单选题】
The introduction of Christianity to Britain added the first element of words to English.
A. A. Danish and Finnish
B. B. Dutch and German
C. C. French and Italian
D. D. Latin and Greek
【单选题】
The evolution of Middle English was reinforced by the influence.
A. A. Norman
B. B. Dutch
C. C. German
D. D. Danish
【单选题】
In Britain, the parliamentary general election is held every years.
A. A. three
B. B. four
C. C. five
D. D. six
【单选题】
has a distinct legal system based on Roman law.
A. A. Wales
B. B. England
C. C. Scotland
D. D. Northern Ireland
【单选题】
Generally speaking, the British Parliament operates on a system.
A. A. single-party
B. B. two-party
C. C. three-party
D. D. multi-party
【单选题】
The policies of the Conservative Party areThe policies of the Conservative Party are characterized by pragmatism and .
A. A. government intervention
B. B. nationalization of enterprises
C. C. social reform
D. D. a belief in individualism
【单选题】
The Labor Party affected the British society greatly in that it .
A. A. set up the National Health Service
B. B. improved public transportation
C. C. abolished the old tax system
D. D. enhanced the economic development
【单选题】
The British economy achieved global dominance by the .
A. A. 1860s
B. B. 1870s
C. C. 1880s
D. D.1890s
【单选题】
In , the British Parliament passed two important acts to establish a welfare state.
A. A. 1945
B. B. 1946
C. C. 1947
D. D. 1948
【单选题】
The in the early 1970s worsened an already stagnant economy in Britain.
A. A. oil crisis
B. B. high inflation rates
C. C. large imports
D. D. unemployment problem
【单选题】
Of the following practices, does not belong to Thatcher’s social welfare reform.
A. A. reducing child benefits
B. B. shortening the unemployment benefits period
C. C. reducing the unemployment
D. D. lowering old age pensions
【单选题】
The Blair government has been successful in all the following aspects except .
A. A. limiting government spending
B. B. keeping inflation under control
C. C. reducing unemployment
D. D. reducing inequality
【单选题】
Britain has devoted of its land area to agriculture.
A. A. 54%
B. B. 64%
C. C. 74%
D. D.84%
【单选题】
Britain’s important fishing areas include all the following except .
A. A. the North Sea
B. B. the English Channelnnel
C. C. The sea area around Ireland
D. D. The sea area between Britain and Ireland
【单选题】
Coal mining industry in Britain provides of the energy consumed in the country.
A. A. 1/3
B. B. 1/4
C. C. 1/5
D. D. 2/3
【单选题】
The car industry in Britain in mostly .
A. A. foreign-owned
B. B. state-owned
C. C. joint-venture
D. D. privately-owned
【单选题】
Of the following sectors in Britain, has experienced spectacular growth since the end of Word War II.
A. A. agriculture
B. B. energy industry
C. C. service industry
D. D. manufacturing industry
【单选题】
Samuel Johnson’s dictionary was influential in establishing a standard form of .
A. A. grammar
B. B. handwriting
C. C. spelling
D. D. pronunciation
【单选题】
At present, nearly of the world’s population communicate in English.
A. A. half
B. B. a quarter
C. C. one third
D. D. one fifth
【单选题】
The attack on Rome ended the Roman occupation in Britain in 410.
A. A. Norman
B. B. Danish
C. C. Celtic
D. D. Germanic
【单选题】
By the late 7th century, became the dominant religion in England.
A. A. Celtic Christianity
B. B. Anglo-Saxon Christianity
C. C. Germanic Christianity
D. D. Roman Christianity
【单选题】
Westminster Abbey was built at the time of .
A. A. St. Augustine
B. B. Edward the Confessor
C. C. William the Conqueror
D. D. Alfred the Great
【单选题】
The marked the establishment of feudalism in England.
A. A. Viking invasion
B. B. signing of the Magna Carta
C. C. Norman Conquest
D. D. Adoption of common law
【单选题】
The end of the Wars of the Roses led to the rule of .
A. A. the House of Valois
B. B. the House of York
C. C. the House of Tudor
D. D. the House of Lancaster
【单选题】
The direct cause for the Religious Reformation was King Henry VIII’s effort to .
A. A. divorce his wife
B. B. break with Rome
C. C. support the Protestants
D. D. declare his supreme power over the church
【单选题】
The English Civil War broke out in 1642 between .
A. A. Protestants and Puritans
B. B. Royalists and Parliamentarians
C. C. nobles and peasants
D. D. aristocrats and Christians
【单选题】
was passed after the Glorious Revolution.
A. A. Bill of Rights
B. B. Act of Supremacy
C. C. Provisions of Oxford
D. D. Magna Carta
【单选题】
The Industrial Revolution was aThe Industrial Revolution was accomplished in Britain by the middle of the century.
A. A. 17th
B. B. 18th
C. C. 19th
D. D. 20th
【单选题】
Britain faced strong challenges in its global imperial dominance by the beginning of the century.
A. A. 17th
B. B. 18th
C. C. 19th
D. D. 20th
【单选题】
As a revising chamber, the House of Lords is expected to the House of Commons.
A. A. rival
B. B. complement
C. C. criticize
D. D. inspect
推荐试题
【单选题】
一般纯金属的结晶温度都比理论结晶温度___。
A. 高
B. 低
C. 相同
D. 不同
【单选题】
合金组织大多数都属于___。
A. 金属化合物
B. 单一固溶体
C. 机械混合物
D. 纯金属
【单选题】
合金钢的性能主要取决于它的___,但可用热处理方法通过改变它的组织来改变它的性能。
A. 工艺性能
B. 机械性能
C. 化学成分
D. 物理成分
【单选题】
Fe-Fe3C相图中的Gs线是冷却时奥氏体析出铁素体的开始线,奥氏体向铁素体的转变是___。
A. 碳在奥氏体中的溶解度达到饱和的结果
B. 溶剂金属发生同素异构转变的结果
C. 奥氏体发生共析转变的结果
D. 溶剂金属发生同素同构转变的过程
【单选题】
为了消除合金铸锭及铸件在结晶过程中形成的枝晶偏析,采用的退火方法为___
A. 完全退火
B. 等温退火
C. 球化退火
D. 扩散退火
【单选题】
工件出现硬度偏高这种退火缺陷时,其补救办法是___
A. 调整加热和冷却参数,重新进行一次退火
B. 进行一次正火
C. 进行一次回火
D. 以上均不行
【单选题】
9。35号钢铸造后存在魏氏体组织,再经正火处理后,可得到的均匀细小的铁素体与___晶体,使机械性能大大改善。
A. 珠光体
B. 奥氏体
C. 渗碳体
D. 莱氏体
【单选题】
正火与退火相比,主要区别是正火冷却速度较快,所获得的组织___比退火高些。
A. 较细,强度,硬度
B. 较粗,强度,硬度
C. 较细,塑性、硬度
D. 较粗,塑性、硬度
【单选题】
淬火钢在回火时,随着回火温度的升高,其机械性能变化趋势是___
A. 强硬度降低,塑韧性提高
B. 强硬度降低,塑韧性降低
C. 强硬度提高,塑韧性降低
D. 强硬度提高,塑韧性提高
【单选题】
回火时,决定钢的组织和性能的主要因素是回火温度,回火温度可根据工件要求的___来选择。
A. 力学性能
B. 物理性能
C. 化学性能
D. 工艺性能
【单选题】
通电导体在磁场中受到电磁力的大小与___。
A. 导体中的电流成正比,与导体在磁场中的有效长度成反比
B. 导体中的电流及导体在磁场中的有效长度成正比
C. 导体中的电流及导体在磁场中的有效长度成反比
D. 导体中的电流成反比,与导体在磁场中的有效长度成正比
【单选题】
磁组大小与磁路___
A. 长度成正比,与铁芯截面面积成反比
B. 长度成反比,与铁芯截面面积成正比
C. 长度成正比,与铁芯截面面积平方成反比
D. 长度平方成反比,与铁芯截面面积成正比
【单选题】
变压器工作时其初次级的电流与初次级电压或匝数的关系是___
A. 与初次级电压成正比,与匝数成反比
B. 与初次级电压或匝数成反比
C. 与初次组电压与反比,与匝数成正比
D. 与初次级电压或匝数成正比
【单选题】
BX—500型弧焊变压器的结构,它实际上是一种带有___的单相变压器。
A. 电抗器
B. 电磁性
C. 双绕组
D. 电容器
【单选题】
空气电离后由___组成。
A. 电子和正离子
B. 原子
C. 分子
D. 中性粒子
【单选题】
维持电弧放电的电压一般为___。
A. 10~50V
B. 50~100V
C. 100~200V
D. 220~380V
【单选题】
手弧焊正常施焊时,电弧的静特性曲线在U形曲线的___
A. 陡降段
B. 缓降段
C. 水平段
D. 上升段
【单选题】
埋弧自动焊在正常电流密度下焊接是其静特性为___
A. 平特性区
B. 上升特性区
C. 陡降特性区
D. 缓降特性区
【单选题】
钨极氩弧焊在大电流区间焊接时,静特性为___
A. 平特性区
B. 上升特性区
C. 陡降特性区
D. 缓降特性区
【单选题】
用碱性焊条焊接时,焊接区内的气体主要是___
A. CO2和CO
B. N2和O2
C. O2和水蒸气
D. N2和H2
【单选题】
焊接化学冶金过程中焊接电弧的温度很高,一般可达___
A. 600~800 ℃
B. 1000~2000℃
C. 6000~8000 ℃
D. 9000~9500℃
【单选题】
焊缝中,与氢无关的缺陷是___。
A. 气孔
B. 白点
C. 冷裂纹
D. 时效硬化
【单选题】
在焊接接头中,由熔化的母材和填充金属组成的部分叫___
A. 熔合区
B. 焊缝
C. 热影响区
D. 正火区
【单选题】
不易淬火钢焊接热影响区中综合性能最好的区域是___
A. ,过热区
B. 正火区
C. 部分相变区
D. 再结晶区
【单选题】
二氧化碳保护焊的生产率比手弧焊高___。
A. 1~2倍
B. 2.5~4倍
C. 4~5倍
D. 5~6倍
【单选题】
细丝二氧化碳气体保护焊时,熔滴应采用___过渡形式.
A. 短路
B. 颗粒状
C. 喷射
D. 滴状
【单选题】
细丝二氧化碳气体保护焊焊丝的伸出长度为___毫米.
A. 小于8
B. 8~15
C. 大于25
D. 15~25
【单选题】
在NBC—250型中N表示___
A. 埋弧焊机
B. 不熔化极气体保护焊机
C. 熔化极气体保护焊机
D. 整流弧焊机
【单选题】
二氧化碳气体保护焊时使用的焊丝直径在1mm以上的半自动焊枪是___。
A. 拉比式焊枪
B. 推丝式焊枪
C. 细丝气冷焊枪
D. 粗丝水冷焊枪
【单选题】
氩弧焊的特点是___。
A. 完成的焊缝性能优良
B. 焊后焊件变形大
C. 焊后焊件应力大
D. 可焊的材料太少
【单选题】
具有良好的“阴极破碎”作用的焊接方法是___。
A. 手弧焊
B. 埋弧焊
C. 氩弧焊
D. 电渣焊
【单选题】
钨极氩弧焊的代表符号是___
A. MIG
B. TIG
C. MAG
D. PMIG
【单选题】
对自由电弧的弧柱进行强迫“压缩”,就能获得导电截面收缩得比较小、能量更加集中、弧柱中气体几乎可达到全部等离子体状态的电弧,就叫___
A. 等离子弧
B. 自由电弧
C. 等离子体
D. 直流电弧
【单选题】
等离子弧焊接是利用___产生的高温等离子弧来熔化金属的焊接方法。
A. 钨极氩弧焊焊枪
B. 手弧焊焊枪
C. 等离子焊枪
D. 碳弧气刨枪
【单选题】
微束等离子弧焊的优点之一是,可以焊接___的金属构件。
A. 极薄件
B. 薄板
C. 中厚板
D. 大厚板
【单选题】
大电流等离子弧焊的电流使用范围为___。
A. 50~500安
B. 550~600安
C. 650~700安
D. 800~1000安
【单选题】
从防止过热组织和细化晶粒的角度考虑,应___。
A. 减小焊接电流
B. 减小焊接速度
C. 增大弧长
D. 增大焊接电流
【单选题】
对于厚壁容器,加热和冷却速度应控制在___。
A. 10~20 ℃/小时
B. 20~30 ℃/小时
C. 50~150℃/小时
D. 150~250 ℃/小时
【单选题】
选择坡口型式时,应尽量___焊缝金属的填充量。
A. 减少
B. 调整
C. 保证
D. 增加
【单选题】
焊接结构的使用条件是多种多样的,当构件在低温工作或冲击载荷工作时,容易发生___。
A. 蠕变
B. 腐蚀性破坏
C. 脆性破坏
D. 塑性破坏