【填空题】
24.我国古代军事思想形成的重要标志性著作是:___、___。
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
《军政 》|《 军事 》
解析
暂无解析
相关试题
【填空题】
25. ___ 是当今世界的时代主题, ___成为主要战争形态。
【填空题】
26.国际战略格局演变的终极原因在于 ___ ,世界经济发展不平衡正在改变世界战
【填空题】
27.20世纪80年代末、90年代初,随着东欧剧变和苏联解体,持续近半个世纪的冷战格局被打破。 “___ ” 是当前乃至今后相当长时期内世界主要战略力量对比的总体态势和总体特征。
【填空题】
28.进入新世纪我国周边外交政策和目标的重要内容是“___ 、___ 、___ ”。
【填空题】
29.我国在有关南海问题上一贯坚持“___、___、___”的原则。
【填空题】
30.决定不同时期各国战略的内容和特点主要包括三个方面:___、___ 、___ 。
【填空题】
31.事实表明,___是阻挠台湾问题解决的最大障碍。
【填空题】
32.我军积极防御的军事战略要处理好防御与进攻的关系,___的关系,军事与政治的关系。
【填空题】
33.新安全观的核心是___、___、 ___ 和 ___ 。
【填空题】
34.人类战争在经过 ___ 、___、___ 、___几个阶段后,正在进入信息化战争阶段。
【填空题】
35.六维空间是指___、___ 、___ 、___ 、___ 、___。
【填空题】
36. 中国人民解放军六个兵种分别是___、___、___、___、___、___。
【填空题】
37.中国人民解放军五大战区分别是___、___、___、___、___。.
【填空题】
38.世界新军事变革不断深化,打赢 ___ 战争成为各国关注的焦点
【填空题】
39.每年九月的___星期六为“全民国防教育日”。
【填空题】
40.制导技术按照不同控制导引方式可概括为 ___ 、 ___ 、 ___ 、 ___ 和___等五种方式。
【填空题】
41.凭借着___与 ___ 提供的“千里眼”、“顺风耳”,军事指挥员可以迅速、准确、全面地掌握敌方的情况,识别、跟踪和预测敌方未来的行动,从而为克敌制胜创造有利条件。
【填空题】
42.八国联军于___年,发动了侵华战争。
【填空题】
43.1957年10月4日,苏联把世界上第一颗 ___ 送入地球近地轨道.
【填空题】
44.中央军委下属机关有___个部<厅>、___个委员会、___个直属机构。
【填空题】
45.___是国防强大的基础。
【填空题】
46.天基武器系统主要指攻击对方航天器用的卫星和卫星平台,包括 ___ 、 ___和___ 等。
【填空题】
47.中国人民解放军海军成立于___年。
【填空题】
48.新概念武器主要有 ___ 、___、 ___ 、 ___ 、___ 等。
【填空题】
49.核武器具有____、冲击波、____ ___、核电磁脉冲和放射性沾染等五种杀伤破坏因素。
【填空题】
50.精确制导技术是指采用高技术直接命中概率超过___以上的武器。
【单选题】
What is an example of social engineering?___
A. gaining access to a computer by observing the user login credentials
B. gaining access to a build through an unguarded entrance
C. gaining access to a server by using a USB stick
D. gaining access to a server room by posing as local IT
【单选题】
Which type of Layer 2 attack enables the attacker to intercept traffic that is intended for one specific recipient?___
A. BPDU attack
B. DHCP starvation I LAB
C. MAC address spoofing
D. CAM table overflow
【单选题】
Which about nested policy maps in a zone-based firewall is true ?___
A. They are limited to two leve ls in a hierarchical policy
B. Parent policies are previously defined policies that are defined by using the service policy command
C. A child policy is a new policy that uses a pre-existing policy.
D. A child policy is a new that uses a pre-existing policy
【单选题】
In which configuration do you configure the ip ospf authentication key 1 command?___
A. routing process
B. interface
C. privileged
D. global
【单选题】
Which statement about command authorization and security contexts is true?___
A. If command authorization is configured, it must be enabled on all contexts.
B. The change to command invokes a new context session with the credentials of the currently
C. AAA settings are applied on a per-context basis
D. The enable. 15 user ang admins with chang to permission ha e dfferent command authorization levels pertontext
【单选题】
Which command do you enter to enable authentication for OSPF on an interface?___
A. router(config-if)#ip ospf message-digest-key 1 md5 CIS COPASS
B. router(config-if)#ip ospf authentication message-digest
C. router(config-if)#ip ospf authentication-key CISCOPASS
D. router(config-if)#area 0 authentication message-digest
【单选题】
What feature defines a campus area network?___
A. It has a single geographic location
B. It lacks external connectivity.
C. It has a limited number of segments.
D. It has limited or restricted Internet access
【单选题】
Which type of attack most commonly involves a direct attack on a network?___
A. :phishing
B. Trojan horse
C. denial of service
D. social engineering
【单选题】
What information does the key length provide in an encryption algorithm?___
A. the cipher block size
B. the hash bloc k size
C. the number of permutations
D. the packet size
【单选题】
How do you verify TaCACS+ connectivity to a device?___
A. You successfully log in to the device by using the local credentials
B. You connect via console port and receive the login prompt.
C. You connect to the device using SSH and receive the login prompt.
D. You successfully log in to the device by using ACS credentials
【单选题】
Which term best describes the concept of preventing the modification of data in transit and in storage?___
A. availability
B. confidentially
C. fidelity
D. integrity
【单选题】
Which loS command is used to define the authentication key for ntp?___
A. switch(config )#ntp authentication-key 1 mds Clcs
B. switch(config )#ntp authenticate
C. switch(config)#ntp trusted-key 1
D. switch(config)#ntp source 192.168.0.1
【单选题】
What is true about the cisco lOS Resilient Configuration feature ?___
A. The feature can be disabled through a remote session
B. There is additional space required to secure the primary cisco lOS image file.
C. The feature automatically detects image or configuration version mismatch.
D. Remote storage is used for securing files
【单选题】
When is the default deny all policy an exception in zone-based firewalls?___
A. when traffic terminates on the router via the self zone
B. when traffic traverses two interfaces in different zones
C. when traffic traverses two interfaces in the same zone
D. when traffic sources from the router via the self zone
推荐试题
【单选题】
DZD多功能智能点灯单元主、副丝断丝时,报警时间应不大于_______。[331010101]___
A. 5s
B. 10s
C. 15s
D. 20s
【单选题】
LED色灯机构发光二极管损坏数量达到_______时,不能影响信号显示的规定距离。[311010103]___
A. 10%
B. 20%
C. 30%
D. 40%
【单选题】
LED色灯机构的正常绝缘电阻应不小于_______。[321010103]___
A. 20MΩ
B. 30MΩ
C. 40MΩ
D. 50MΩ
【单选题】
ZXD型智能信号点灯报警装置点灯单元在输入电压范围内,冷丝冲击电流小于或等于_______。[321010102]___
A. 3A
B. 5A
C. 8A
D. 10A
【单选题】
ZXD型智能信号点灯报警装置点灯单元在输入电压范围内,软启动时间小于或等于_______。[321010102]___
A. 0.1s
B. 0.2s
C. 0.3s
D. 0.5s
【单选题】
CTCS-2列控系统出站有源应答器的信息丢失后,列控车载设备生成NBP为_______的核对速度曲线。[322000000]___
A. 20km/h
B. 30km/h
C. 50km/h
D. 55km/h
【单选题】
CTCS-2级车站的临时限速信息必须管辖到从执行点应答器至列车在执行点线路速度下的常用制动至_______的制动距离所需的数据。[322000000]___
A. 25km/h
B. 30km/h
C. 45km/h
D. 55km/h
【单选题】
在用BEPT向应答器写入数据时,应将BEPT置于应答器_______。[322000000]___
A. 正下方
B. 正上方
C. 正左方
D. 正右方
【单选题】
在用BEPT向应答器写入数据直至结束,大约需要_______。[311000000]___
A. 30s
B. 1min
C. 3min
D. 5min
【单选题】
在用BEPT向LKD1-T型车站列控中心LEU数据写入直至结束,大约需要_______。[311000000]___
A. 3min
B. 5min
C. 8min
D. 10min
【单选题】
CTCS-2列控系统应答器运行温度范围为-40℃~_______。[311010103]___
A. +50℃
B. +60℃
C. +70℃
D. +80℃
【单选题】
BE1K-800型扼流变压器牵引线圈中点允许通过连续总电流为_______。[322010101]___
A. 400A
B. 600A
C. 800A
D. 1000A
【单选题】
BE1K-800型扼流变压器牵引线圈和信号线圈的匝数比为_______。[321010103]___
A. 1:2
B. 1:3
C. 2:1
D. 3:1
【单选题】
一台BGY2-80变压器可同时供_______室外信号点灯变压器工作。[321010103]___
A. 一个
B. 两个
C. 三个
D. 四个
【单选题】
BGY2-80变压器的传输距离为_______。[321010103]___
A. 0~5km
B. 0~8km
C. 0~15km
D. 0~18km
【单选题】
当输入额定电压,变压器空载时,其二次端子电压的误差不大于端子额定电压值的±_______。[321010101]___
A. 3%
B. 5%
C. 7%
D. 8%
【单选题】
容量为30VA至100VA(包括100VA)的变压器满负载时,其二次端子电压不得小于端子额定电压值的_______。[311010101]___
A. 80%
B. 85%
C. 90%
D. 95%
【单选题】
DR系列多功能熔丝装置备熔丝断路时_______。[311010103]___
A. 红色指示灯点亮
B. 黄色指示灯点亮
C. 红色和黄色指示灯同时点亮
D. 红色和黄色指示灯都不点亮
【单选题】
DR-24多功能熔丝装置的最大工作电流_______。[322010102]___
A. 3A
B. 5A
C. 8A
D. 10A
【单选题】
JHJ-40型电源转换接触器触点位置不应有歪扭现象,应保持接触面在_______以上,并紧密接触。[321010103]___
A. 1/3
B. 1/2
C. 2/5
D. 2/3
【单选题】
JHJ-40型电源转换接触器三个主触点应同时闭合和分断,误差不大于_______。[321010103]___
A. 0.05mm
B. 0.3mm
C. 0.5mm
D. 1mm
【单选题】
JHJ-40型电源转换接触器磨损后的触头厚度不小于原厚度的_______。[321010103]___
A. 1/4
B. 1/2
C. 2/5
D. 2/3
【单选题】
D2系列交流接触器线圈长时间工作相对温升_______。[321010103]___
A. ≤40℃
B. ≤50℃
C. ≤60℃
D. ≤70℃
【单选题】
单相变压器电源电压不变,负载电阻增大,原边电流_______。[321010101]___
A. 增大
B. 减小
C. 不变
D. 不一定
【单选题】
压敏电阻标称电压的选择,在交流回路中应不低于工作电压的_______。[322010101]___
A. 1.5倍
B. 2倍
C. 2.2倍
D. 2.5倍
【单选题】
提速道岔断相保护器DCBHQ输入电流为交流_______。[321010101]___
A. 0.5A~2A
B. 1A~3A
C. 1A~3.5A
D. 1A~4A
【单选题】
提速道岔断相保护器DBQ输入电流为交流_______。[321010101]___
A. 0.5A~2A
B. 1A~3A
C. 1A~3.5A
D. 1.5A~3.5A
【单选题】
提速道岔断相保护器DBQX输出电压为直流_______。[321010102]___
A. 16V~24V
B. 17.5V~28V
C. 24V~28V
D. 28V~32V
【单选题】
提速道岔断相保护器QDB-S断相输出电压为直流_______。[321010102]___
A. ≤0.1V
B. ≤0.2V
C. ≤0.3V
D. ≤0.4V
【单选题】
BZ4型变压器空载时,其二次端子电压的误差不大于端子额定电压值的_______。[321010101]___
A. ±10%
B. ±5%
C. 5%
D. 10%
【单选题】
BD1-7、BD1-10型变压器的作用是_______。[321010103]___
A. 变压
B. 隔离
C. 隔离变压
D. 升压
【单选题】
BZ4型变压器的一次线圈额定电压为_______。[321010101]___
A. 0.5V
B. 1V
C. 9V
D. 10V
【单选题】
BYD-60型变压器一次线圈空载电流不大于_______。[321010101]___
A. 0.011A
B. 0.01A
C. 0.1A
D. 0.012A
【单选题】
BYD-60型变压器二次线圈额定电流为_______。[311010101]___
A. 2.1A
B. 2A
C. 4.5A
D. 5A
【单选题】
BYD-60型变压器二次线圈电压为_______。[311010101]___
A. 1.5V~2.8V
B. 28V
C. 1.6V
D. 1.6V~28.1V
【单选题】
变压器的绝缘电阻,在非运用中用500伏MΩ表测量时,不得低于_______。[311010103]___
A. 20MΩ
B. 22MΩ
C. 24MΩ
D. 25MΩ
【单选题】
提速道岔控制电路中的BHJ在三相电源断相时落下_______,用以保护电机。[323010103]___
A. 构通1DQJ自闭电路
B. 切断1DQJ自闭电路
C. 切断1DQJ励磁电路
D. 构通1DQJ励磁电路
【单选题】
PNX系列铁路信号智能电源屏过压阀值的调整范围为_______。(U为输入电源的电压值) [321010102]___
A. 0.6U~0.8U
B. 0.6U~0.9U
C. 1.1U~1.2U
D. 1.1U~1.3U
【单选题】
提速道岔控制电路中的BHJ在三相电源接通时吸起_______。[323010103]___
A. 构通1DQJ自闭电路
B. 切断1DQJ自闭电路
C. 切断1DQJ励磁电路
D. 构通1DQJ励磁电路
【单选题】
电源屏继电器电源应为直流24V,当回路负载在70%-80%范围内变化时,输出应稳定在_______范围。[321010102]___
A. 24V±0.5V
B. 24V±0.86V
C. 24V±0.9V
D. 24V±1V