【多选题】
___0092.国家有关法律法规对特种作业人员的培训和考核提出了明确要求。特种作业人员安全技术考核的内容包括( )。
A. 技术等级考试
B. 安全技术理论考试
C. 职业技能标准考核
D. 实际操作技能考核
查看试卷,进入试卷练习
微信扫一扫,开始刷题
答案
BD
解析
暂无解析
相关试题
【多选题】
___0093.使用单位应当对压力容器本体及其安全附件、( )进行日常维护保养。
A. 装卸附件
B. 安全保护装置
C. 测量调控装置
D. 附属仪器仪表
【多选题】
___0094.负责特种设备安全监督管理的部门应当对每次( )作出记录,并由参加监督检查的特种设备安全监察人员和被检查单位的有关负责人签字后归档。
A. 监督检查的内容
B. 发现的问题
C. 被检查单位的配合情况
D. 处理情况
【多选题】
___0095.下列属于特种作业的有( )。
A. 电工作业
B. 焊接与热切割作业
C. 气瓶作业
D. 有限空间作业
【多选题】
___0096.下列特种劳动防护用品管理工作,正确的有( )。
A. 及时更换过期的护品
B. 按时报废过期的护品
C. 及时报废失效的护品
D. 使用自制的护品
【多选题】
___0097.任何单位或者个人对事故隐患或者安全生产违法行为,均有权向负有安全生产监督管理职责的部门( )。
A. 报告
B. 举报
C. 检举
D. 揭发
【多选题】
___0098.以下情况中用人单位可以提前三十日以书面形式通知劳动者本人解除劳动合同的包括( )。
A. 劳动者患病或者非因工负伤,医疗期满后,不能从事原工作也不能从事由用人单位另行安排的工作的
B. 劳动者不能胜任工作,经过培训或者调整工作岗位,仍不能胜任工作的
C. 女职工在孕期、产期、哺乳期内的
D. 劳动合同订立时所依据的客观情况发生重大变化,致使原劳动合同无法履行,经当事人协商不能就变更劳动合同达成协议的
【多选题】
___0099.下列属于无效的劳动合同的有( )。
A. 违反法律、行政法规的劳动合同
B. 劳动者在非自愿的情况的签订的劳动合同
C. 采取欺诈、威胁等手段订立的劳动合同
D. 双方协商签订的以现金代替劳动防护的合同
【多选题】
___0100.用人单位不得安排( )从事使用有毒物品的作业。
A. 正式员工
B. 未成年人
C. 孕期的女职工
D. 哺乳期的女职工
【多选题】
___0101.劳动者有权在正式上岗前从用人单位获得的资料有( )。
A. 作业场所使用的有毒物品的特性、有害成分、预防措施、教育和培训资料
B. 有毒物品的标签、标识及有关资料
C. 有毒物品安全技术说明书
D. 可能影响安全使用有毒物品的其他有关资料
【多选题】
___0102.事故发生单位负责人接到事故报告后,应当立即启动事故相应应急预案,或者采取有效措施,组织抢救,( )。
A. 防止事故扩大
B. 减少人员伤亡
C. 减少财产损失
D. 保证物料完好无损
【多选题】
___0103.事故发生后,有关单位和人员应当妥善保护事故现场以及相关证据,任何单位和个人不得( )。
A. 破坏事故现场
B. 毁灭相关证据
C. 传播现场事故信息
D. 打电话报警
【多选题】
___0104.根据《北京市生产安全事故应急预案管理办法》,生产经营单位应针对本单位可能存在较大危险性的( )等,制定相应的现场处置方案。
A. 重点人员
B. 重点部位
C. 重点工作岗位
D. 重要设备
【多选题】
___0105.《北京市生产安全事故隐患排查治理办法》规定,重大事故隐患消除前,生产经营单位应当向从业人员公示事故隐患的( )。
A. 危害程度
B. 影响范围
C. 形成原因
D. 应急措施
【多选题】
___0106.对于重大事故隐患,生产经营单位应当及时向安全监管监察部门和有关部门报告,重大事故隐患报告内容应当包括( )。
A. 与隐患接触的人员的情况
B. 隐患的现状及其产生原因
C. 隐患的危害程度和整改难易程度分析
D. 隐患的治理方案
【多选题】
___0107.事故报告的内容包括( )。
A. 事故发生单位概况
B. 事故发生单位负责人信息
C. 事故发生的时间、地点
D. 事故的简要经过
【多选题】
___0108.依据《职业病防治法》,在进行职业病诊断时,应当综合分析的因素包括( )。
A. 病人家族病史
B. 职业病危害接触史
C. 病人的职业史
D. 病人个体体质诊断
【多选题】
___0109.建设项目的职业病防护设施所需费用应当纳入建设项目工程预算,并与主体工程( )。
A. 同时报废
B. 同时设计
C. 同时施工
D. 同时投入生产和使用
【多选题】
___0110.对产生严重职业病危害的作业岗位,应当在其醒目位置,设置( )。
A. 英文警示说明
B. 警示标识
C. 中文警示说明
【多选题】
___0111.对可能发生急性职业损伤的有毒、有害工作场所,用人单位应当设置报警装置,配置现场急救用品、冲洗设备、( )。
A. 应急撤离通道
B. 必要的泄险区
C. 呼吸室
D. 消火栓
【多选题】
___0112.用人单位应当按照国家有关规定,安排职业病病人进行( )。
A. 治疗
B. 康复
C. 定期检查
D. 全面检查
【多选题】
___0113.职业危害因素是指( )。
A. 职业中毒
B. 职业伤亡
C. 工业粉尘
D. 生产噪声
【多选题】
___0114.产生职业病危害的用人单位的工作场所应当符合( )等基本要求。
A. 生产布局合理,有害作业与无害作业分开
B. 工作场所与生活场所分开,工作场所可以少量住人
C. 有与职业病防治工作相适应的有效防护设施
D. 有配套的更衣间、洗浴间、孕妇休息间等卫生设施
【多选题】
___0115.企业应当对职业性有害因素生产作业从( )方面考虑,采取机械化、密闭化、自动化控制措施。
A. 设备
B. 物
C. 环境
D. 人
【多选题】
___0116.用人单位应在可能产生严重职业病危害的作业岗位以及产生职业病危害的( )等设置警示标识。
A. 设备
B. 材料
C. 员工宿舍
D. 贮存场所
【多选题】
___0117.产生粉尘的工作场所应设置( )等警示标识。
A. 注意防尘
B. 戴防尘口罩
C. 注意通风
D. 当心中毒
【多选题】
___0118.对皮肤有刺激性或经皮肤吸收的粉尘工作场所应设置( )等警示标示。
A. 当心中毒
B. 穿防护服
C. 戴防护手套
D. 戴防护眼镜
【多选题】
___0119.产生噪声的工作场所应设置( )等警示标识。
A. 噪声有害
B. 戴防毒面具
C. 戴护耳器
D. 注意防尘
【多选题】
___0120.高温工作场所应设置( )等警示标识。
A. 当心中暑
B. 注意高温
C. 注意通风
D. 戴防护手套
【多选题】
___0121.能引起电光性眼炎的工作场所应设置( )等警示标识。
A. 注意防尘
B. 当心弧光
C. 当心中毒
D. 戴防护镜
【多选题】
___0122.存在低温作业的工作场所应设置( )等警示标识。
A. 注意低温
B. 注意防尘
C. 当心冻伤
D. 当心中毒
【多选题】
___0123.密闭空间作业场所出入口应设置( )等警示标识。
A. 当心弧光
B. 密闭空间作业危险
C. 进入需许可
D. 戴防毒面具
【多选题】
___0124.产生手传振动的工作场所应设置( )等警示标识。
A. 当心中毒
B. 注意高温
C. 振动有害
D. 使用设备时必须戴防振手套
【多选题】
___0125.使用可能产生职业病危害的化学品、放射性同位素和含有放射性物质的材料的,必须在使用岗位设置醒目的( )。
A. 警示标识
B. 安全管理责任制度挂牌
C. 英文警示说明
D. 中文警示说明
【多选题】
___0126.贮存可能产生职业病危害的化学品、放射性同位素和含有放射性物质材料的场所,应当在入口处和存放处设置( )等警示标识。
A. 当心中毒
B. 当心电离辐射
C. 注意防尘
D. 非工作人员禁止入内
【多选题】
___0127.根据《用人单位职业病危害告知与警示标识管理规范》,公告栏应设置在( )等方便劳动者观看的醒目位置。
A. 用人单位办公区域
B. 工作场所入口处
C. 员工宿舍
D. 员工食堂
【多选题】
___0128.根据《用人单位职业病危害告知与警示标识管理规范》,警示标识(不包括警示线)应采用( )的材料制作。
A. 防雨
B. 坚固耐用
C. 不易变形变质
D. 阻燃
【多选题】
___0129.根据《用人单位职业病危害告知与警示标识管理规范》,公告栏、告知卡和警示标识不应设在( )。
A. 门
B. 工作场所入口处
C. 窗
D. 可移动的物体上
【多选题】
___0130.根据粉尘化学性质不同,粉尘对人体有( )等作用。
A. 窒息
B. 中毒
C. 致过敏
D. 致纤维化
【多选题】
___0131.化学性职业危害主要有( )。
A. 生产性粉尘
B. 辐射
C. 化学毒物
D. 高温
【多选题】
___0132.生产性毒物进入人体的途径主要有( )。
A. 呼吸道
B. 消化道
C. 眼睛
D. 皮肤
推荐试题
【多选题】
When attempting to access a virtual machine, an administrator is unable to login using the vSphere credentials. What two options are probable causes of the authentication failure? (Choose two.)___
A. The vSphere credentials have not been granted permissions.
B. The vSphere credentials are granted read-only permissions.
C. The vSphere credentials are granted no-access permissions.
D. The vSphere credentials are not a member of the local administrator group.
【多选题】
An administrator is performing a scripted installation of ESXi 6.x. In which three locations does the script need to be? (Choose three.)___
A. PXE Server
B. HTTPS
C. FTP
D. NFS
E. VVOLs Datastore
【多选题】
In order for a company to meet regulatory requirements, all ESXi 6.x Hosts must be configured to direct logs to a syslog server. What are two ways ESXi hosts can configured for this action? (Choose two)___
A. Use the esxcli system syslog command.
B. Edit them in the ESXi host Advanced System Settings.
C. From the Syslog collector user interface of the Web Client.
D. Syslog logging is not available for
E. SXi Hosts.
【多选题】
Which three actions can be executed when an alarm is triggered? (Choose three.)___
A. Send an email.
B. Send an SNMP trap.
C. Run a script or command.
D. Run an Orchestrator workflow.
E. Send a trigger to syslog.
【多选题】
An administrator is attempting to power on a virtual machine, but is unable to do so. Which two reasons are probable causes of the failure? (Choose two.)___
A. Storage access to the virtual machine swap file has been lost.
B. One of the virtual machine VMDK files is locked.
C. Virtual machine is running CentOS 7.0 64-bit.
D. Virtual machine has Hyper-Threading enabled.
【多选题】
An administrator has configured a host profile so that ESXi 6.x hosts will point to the corporate NTP server for time synchronization. The NTP server is located at 10.0.30.213, but time has not been synchronized properly across the ESXi hosts. The administrator reviews Host Profile settings as shown in the Exhibit. Which two steps are required to resolve the issue? (Choose two.)___
A. Correct the NTP server IP address.
B. Check the host for host profile compliance.
C. Remediate the host based on the updated host profile.
D. Change the NTP server to the FQDN as IP Addresses are not supported.
【多选题】
An administrator is attempting to migrate a large Hadoop virtual machine using vMotion. The administrator notices a delay when the machine is quiesced. The Hadoop virtual machine is processing many transactions a second to an in-memory database. Which two actions would help reduce the amount of time needed to perform a vMotion on this virtual machine? (Choose two.)___
A. Use multiple NICs for the vMotion vmkernel port.
B. Use a 10Gbps Network card for the vMotion vmkernel port.
C. Add an additional management network to help transmit the data quicker.
D. Disable Fault Tolerance before performing the vMotion.
【多选题】
An administrator is installing a new network card in an ESXi 6.x host that is part of a vSphere cluster. When the host is placed into maintenance mode, the vSphere Web Client displays the progress bar at 2% for over 30 minutes. Which two are likely reasons for this occurrence? (Choose two.)___
A. Maintenance mode is unable to migrate all virtual machines from the host.
B. There is a large number of virtual machines that must be migrated from the host.
C. VMware High Availability is in the process of reconfiguring the cluster.
D. Each virtual machine on the
E. SXi host must be reconfigured to recognize the new adapter.
【多选题】
Which two events happen when Distributed Resource Scheduler (DRS) is disabled? (Choose two.)___
A. The cluster's resource pool heirarchy and affinity rules are re-established when DRS is turned back on.
B. The cluster's resource pool hierarchy and affinity rules are not re-established when DRS is turned back on.
C. The cluster's resource pools are removed from the cluster.
D. The cluster's resource pools are removed from the cluster and assigned to the hosts.
【多选题】
Which two networking connection types can be configured on a virtual switch? (Choose two.)___
A. Virtual machine portgroups
B. VMkernel services (such as NFS, iSCSI, or vMotion) to the physical network
C. Web services over the Management Network
D. NFS and FCoE storage services
【多选题】
An administrator creates a DRS cluster of eight ESXi 6.x hosts. There are 10 virtual machines balanced across the hosts. An attempt to place the first host into maintenance mode fails. What are two reasons that the host failed to enter maintenance mode? (Choose two.)___
A. The DRS cluster Automation Level is set to Partially Automated mode.
B. One of the virtual machines on the ESXi Host entering maintenance mode is configured with a DRS Host affinity rule Should run on hosts in group.
C. One of the virtual machines on the ESXi Host entering maintenance mode is configured with a DRS Host affinity rule Must run on hosts in group.
D. One of the virtual machines on the
E. SXi Host entering maintenance mode is configured with an individual Automation Level set to Partially Automated.
【多选题】
When modifying a vApp, which two vSphere entities can be added? (Choose two.)___
A. A resource pool
B. A network pool
C. A vApp
D. A folder
【多选题】
From which two locations in the inventory hierarchy can you deploy a virtual machine using a template? (Choose two.)___
A. Directly from the template.
B. From a compute resource.
C. From an existing virtual machine.
D. From a Datastore.
【多选题】
A company has decided to implement Virtual SAN within their vSphere 6.x environment. The Virtual SAN cluster will be composed of three ESXi 6.x hosts that are on the Virtual SAN Ready Node list. Each ESXi host includes: <Two SAS Controllers that support Passthrough Mode> < Four Solid State Drives (SSDs) 1TB in size each> <20 SAS Magnetic Disks (MDs) 1TB in size each> <The SSDs and MDs are evenly split between the two SAS controllers>. The company will pilot a Virtual SAN cluster utilizing VMware best practices while maximizing storage capacity. The Virtual SAN cluster will use Manual Mode. Which two Disk Group configurations would meet the stated configuration requirements? (Choose two.)___
A. 4 disk groups with 1 SSD and 5 MDs each
B. 2 disk groups with 1 SSD and 7 MDs each
C. 2 disk groups with 2 SSDs and 7 MDs each
D. 2 disk groups with 1 SSD and 10 MDs each
【多选题】
A physical Windows 2008 R2 Server is converted to a virtual machine using VMware vCenter Converter. Upon completion of the conversion and subsequent power on operation, the virtual machine fails to boot and the message below is observed in the Console of the virtual machine: <STOP 0x0000007B INACCESSIBLE_BOOT_DEVICE>. Which two potential issues may be causing this boot failure? (Choose two.)___
A. An incorrect SCSI controller was selected during conversion.
B. Incompatible software drivers were migrated into the virtual machine from the source machine.
C. The vmdk file backing the virtual machine was thick provisioned.
D. A snapshot was taken immediately after the conversion completed.
【多选题】
An administrator is configuring the Failover Order option on a vSphere Distributed Switch. Which two options should be used with IP-hash load balancing? (Choose two.)___
A. Active Uplinks
B. Standby Uplinks
C. Unused Uplinks
D. Override Failover Order
【多选题】
An administrator is configuring the Maximum Transmission Unit value on a vSphere Distributed Switch. Which two options are typical values for ESXi networking? (Choose two.)___
A. 1492
B. 1500
C. 9000
D. 9089
【多选题】
Which two configurable options apply to both virtual machine CPU and memory allocation? (Choose two.)___
A. Reservation
B. Shares
C. Resource Pool
D. Reserve All
【多选题】
When attempting to power on a Virtual Machine you observe the following error: <Cannot open the disk '/vmfs/volumes/volume/vm/vm-000002.vmdk' or one of the snapshot disks it depends on.> Which three actions will be the best solutions to address this problem? (Choose three.)___
A. Verify that the virtual machine's disk files are present.
B. Investigate the host and virtual machine log files.
C. Verify the vmdk descriptor files and if required, recreate them.
D. Delete the disk file preventing the power on operation.
E. Migrate or register the virtual machine to a different host.
【多选题】
An administrator has been tasked with enabling High Availability ___ on a cluster in a vSphere 6.x environment with default settings. The cluster configures properly and there are no errors. The next day when powering on a virtual machine, an error is presented: <Not Enough Failover Resources>. Which three scenarios are likely causes of this error message? (Choose three.)(CDE)
A. The default VM Monitoring Sensitivity is set too high.
B. There are not enough datastore heartbeat datastores configured by default.
C. The default slot size in the cluster is set too high.
D. There are virtual machines with large CPU reservations.
E. A host is in maintenance mode for a replacement of a failed Hard Drive.
【多选题】
vMotion can be performed between which three physical boundaries? (Choose three.)___
A. Between two vCenter Server Systems
B. Between two vSphere Distributed Virtual Switches
C. Between two vCenter Server Datacenter objects
D. Between two VMware NSX Layer 4 segments
E. Between two NFS datastores
【多选题】
An administrator configures vSphere Replication for a virtual machine and enables multiple point in time (PIT) instances under the recovery settings in the Configure Replication wizard. Which two statements are correct for vSphere Replication with multiple point in time instances enabled? (Choose two.)___
A. vSphere Replication retains a number of snapshot instances of the virtual machine on the target site based on the retention policy that you specify.
B. vSphere Replication uses the virtual machine's snapshot instances to define the target site Point in Time instance based on the retention policy that you specify.
C. vSphere Replication does not support virtual machines with snapshots.
D. vSphere Replication supports virtual machines with snapshots.
【多选题】
An administrator is virtualizing a physical application server and adding it to an existing multi-tiered vApp. The application license is currently tied to the physical NIC's MAC address, so the administrator needs to ensure the license will function properly in the virtual machine. Which two actions can the administrator take to satisfy this task? (Choose two.)___
A. Set the MAC address for the vNIC in the guest operating system.
B. Install the physical server's NIC into the ESXi host.
C. Configure the MAC address for the vNIC using the vSphere Web Client.
D. Assign the physical server NIC's MAC address in the vSphere Distributed Switch.
【多选题】
Which two Fibre Channel zoning options are supported with vSphere 6.x? (Choose two.)___
A. Single-Initiator
B. Single-Initiator-Single-Target
C. Multiple-Initiators-Single-Target
D. Multiple-Initiators-Multiple-Targets
【多选题】
An administrator is attempting to remove an ESXi 6.x host from a vSphere Distributed Switch (vDS). When the administrator attempts to remove the host, the following error is observed: <The resource '16' is still in use.> What three steps are needed to successfully remove the host from the switch? (Choose three.)___
A. Select Manage Ports on the vDS for the host.
B. Locate all ports currently in use on the vDS for the host.
C. Migrate or delete any vmkernel or virtual machine adapters associated with the switch.
D. Remove all network cards from the switch before trying to remove the host.
E. Create a standard switch for everything to be automatically be migrated to.
【多选题】
Which two Virtual SAN related actions might start resynchronization of virtual machine objects? (Choose two.)___
A. Editing a virtual machine storage policy to increase the number of replicas.
B. Editing a virtual machine storage policy to reduce the number of replicas.
C. Editing a virtual machine storage policy to increase the number of disk stripes.
D. Editing a virtual machine storage policy to reduce the number of disk stripes.
【多选题】
An administrator is troubleshooting basic network connectivity issues. Which two scenarios are potential issues that this administrator might face? (Choose two.)___
A. The vSwitch is not attached to the correct physical network.
B. The portgroup is not configured to use correct VLAN.
C. Traffic shaping is configured incorrectly.
D. Jumbo frames is configured incorrectly.
【多选题】
Which three items should be validated prior to installing ESXi 6.x? (Choose three.)___
A. Remote Storage has been disconnected.
B. Installation media is available.
C. Server hardware clock is set to UTC.
D. Storage has been partitioned with a VMFS volume.
E. Network cards have been setup to use Jumbo
F. rames.
【多选题】
An administrator is performing an interactive installation of ESXi 6.x. Which three options are available for installation? (Choose three.)___
A. DVD
B. USB
C. PXE
D. Scripted
E. Auto Deploy
【多选题】
After installation of a host in your test environment, you need to move it to production. The only major change that needs to be made is that the hostname of the server needs to change. What are two ways that an administrator can change the host name without editing configuration files on the host directly? (Choose two.)___
A. Login to the Direct Console User Interface and change it from here.
B. Edit the Default TCP/IP Configuration from the vSphere Web Client.
C. Use the Ruby vSphere Client to send a script to the ESXi host that updates the hostname.
D. Update the information in DNS and the
E. SXi host will automatically update with these changes.
【多选题】
An administrator has unsuccessfully attempted several times to install an Operating System inside a virtual machine. The administrator finds that the installation fails at random intervals. Which two actions can be taken to resolve this issue? (Choose two.)___
A. Verify the md5sum and if invalid, download the installation files again.
B. Attempt the installation an additional time.
C. Attempt to use a different installation media or installation method.
D. Create a new virtual machine and attempt the installation with the existing media.
【多选题】
VMware tools is failing to install on a Microsoft Windows virtual machine. What are two possible situations that would prevent the installation? (Choose two.)___
A. The VMware tools installation media is corrupt.
B. The incorrect Operating System was selected in the virtual machine options.
C. The software prerequisites have not been installed.
D. The prerequisite services have not been started.
【多选题】
As part of a multisite Single Sign-On (SSO) deployment what two steps are required to ensure that a change to one Single Sign-On instance is propagated to the other instances? (Choose two.)___
A. Schedule a Replication Task on the primary instance
B. Select the first instance during the installation of subsequent instances
C. During the installation of each instance choose Linked-Mode
D. Enable Synchronize to Active Directory on each instance
【多选题】
You need to add an object to an existing vApp using the vSphere Web Client. How is this accomplished?___
A. Create an Object Inside the vApp.
B. Add an Object to a vApp.
C. Add an Object to the
D. atastore the vApp is located in.
【多选题】
Which three steps must be taken to use vSphere Update Manager 6.x to upgrade an ESXi 5.5 host to vSphere 6.x? (Choose three.)___
A. Download an ESXi Image.
B. Configure the vSphere Update Manager Download Service.
C. Create a baseline and attach it to the ESXi Host.
D. Scan the vCenter Content Library for the
E. SXi Image.
【多选题】
Which two options would allow a database administrator, with no access to the vSphere infrastructure, to connect to a virtual machine? (Choose two.)___
A. Use the Virtual Machine Remote Console (VMRC).
B. Use Remote Desktop Protocol (RDP) to connect.
C. Ask the vSphere administrator to grant permission to access the console through vCenter Server.
D. Ask the vSphere administrator to grant permission to access with the Horizon View Direct Connect Client.
【多选题】
Which three are architecture components of vRealize Operations? (Choose three.)___
A. Identity Server
B. Administrative Server
C. Analytics Server
D. Database Server
E. Connection Broker
【单选题】
金克拉金克拉撒旦蒂萨里大儿童家爱丽丝打开就撒开绿灯技术的()
A. 手动阀手动阀
B. 撒旦
C. 反对法
D. 第三方
【单选题】
金克拉金克拉撒退热贴开绿灯技术的()
A. 是否
B. 阿斯顿
C. 撒旦
D. 感到反感
【单选题】
而非热舞法国会开绿灯技术的()
A. 撒的
B. 热个股分化
C. 返回
D. 而我认为